Site-To-Site

This scenario shows how to configure and connect two subnets with each other through a VPN tunnel. The initiator requests an additional IP address from the responder to use as the inner IPsec tunnel address.

../../../../../../_images/sitetosite1.svg

Test Site-To-Site VIP Pool And A Single Client

Description

In this scenario, DUT1 acts as initiator and requests a VIP from the DUT0 pool.

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces eth0 address 80.0.0.1/24
set vpn ipsec auth-profile AUTH-SA local auth pre-shared-secret test
set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128
set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19
set vpn ipsec ike-group IKE-SA key-exchange ikev2
set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19
set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128
set vpn ipsec ike-group IKE-SA proposal 1 hash sha256
set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA
set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA
set vpn ipsec site-to-site peer PEER ike-group IKE-SA
set vpn ipsec pool POOL prefix 10.3.0.0/24
set vpn ipsec site-to-site peer PEER pool POOL
set interfaces dum0 address 10.1.0.1/24
set vpn ipsec site-to-site peer PEER connection-type respond
set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24
set protocols static route 10.3.0.0/24 interface eth0
set vpn ipsec esp-group CHILD-SA mode tunnel

Step 2: Set the following configuration in DUT1:

set interfaces eth0 address 80.0.0.2/24
set vpn ipsec auth-profile AUTH-SA local auth pre-shared-secret test
set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128
set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19
set vpn ipsec ike-group IKE-SA key-exchange ikev2
set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19
set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128
set vpn ipsec ike-group IKE-SA proposal 1 hash sha256
set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA
set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA
set vpn ipsec site-to-site peer PEER ike-group IKE-SA
set interfaces dum0
set vpn ipsec site-to-site peer PEER install-vips interface dum0
set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1
set vpn ipsec site-to-site peer PEER connection-type initiate
set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24

set protocols static route 10.1.0.0/24 interface eth0
set vpn ipsec esp-group CHILD-SA mode tunnel

Step 3: Ping IP address 80.0.0.1 from DUT1:

admin@DUT1$ ping 80.0.0.1 count 1 size 56 timeout 1
Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data.
64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.419 ms

--- 80.0.0.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.419/0.419/0.419/0.000 ms

Step 4: Ping IP address 80.0.0.2 from DUT0:

admin@DUT0$ ping 80.0.0.2 count 1 size 56 timeout 1
Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data.
64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.383 ms

--- 80.0.0.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.383/0.383/0.383/0.000 ms

Step 5: Run command interfaces dummy dum0 show at DUT1 and expect this output:

Show output
----------------------------------------------------------------
Name          IP Address           Admin  Oper  Vrf  Description
----------------------------------------------------------------
dum0  10.3.0.1/32                  up     up
      fe80::2811:9ff:fef2:6606/64

Step 6: Run command vpn ipsec show sa at DUT1 and check if output matches the following regular expressions:

peer-PEER-tunnel-\d+.+INSTALLED
Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, af5034db41336ca5_i* 0f1f409fa5d48ee8_r
  local  '80.0.0.2' @ 80.0.0.2[500] [10.3.0.1]
  remote '80.0.0.1' @ 80.0.0.1[500]
  AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256
  established 0s ago, rekeying in 18885s
  peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256
    installed 0s ago, rekeying in 3367s, expires in 3960s
    in  c083f776,      0 bytes,     0 packets
    out cbae5080,      0 bytes,     0 packets
    local  10.3.0.1/32
    remote 10.1.0.0/24

Step 7: Ping IP address 10.1.0.1 from DUT1:

admin@DUT1$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1
Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data.
64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.460 ms

--- 10.1.0.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.460/0.460/0.460/0.000 ms

Step 8: Initiate a tcp connection from DUT1 to DUT0 and try to send some messages between both endpoints

admin@DUT0$ monitor test connection server 8080 tcp
admin@DUT1$ monitor test connection client 10.1.0.1 8080 tcp local-address 10.3.0.1

Step 9: Run command vpn ipsec show sa at DUT1 and check if output matches the following regular expressions:

[1-9]\d? packets
Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, af5034db41336ca5_i* 0f1f409fa5d48ee8_r
  local  '80.0.0.2' @ 80.0.0.2[500] [10.3.0.1]
  remote '80.0.0.1' @ 80.0.0.1[500]
  AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256
  established 4s ago, rekeying in 18881s
  peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256
    installed 4s ago, rekeying in 3363s, expires in 3956s
    in  c083f776,    868 bytes,    14 packets,     0s ago
    out cbae5080,    920 bytes,    15 packets,     0s ago
    local  10.3.0.1/32
    remote 10.1.0.0/24

Step 10: Run command vpn ipsec show pool summary at DUT0 and check if output matches the following regular expressions:

1\s+0\s+\d+
Show output
--------------------------------------
pool  base IP   online  offline  total
--------------------------------------
POOL  10.3.0.0       1        0    254

Test Site-To-Site VIP Pool And Multiple Clients

Description

In this scenario, DUT0 install reoutes in a separate VRF called LAN.

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces eth0 address 80.0.0.1/24
set vpn ipsec auth-profile AUTH-SA local auth pre-shared-secret test
set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128
set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19
set vpn ipsec ike-group IKE-SA key-exchange ikev2
set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19
set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128
set vpn ipsec ike-group IKE-SA proposal 1 hash sha256
set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA
set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA
set vpn ipsec site-to-site peer PEER ike-group IKE-SA
set vpn ipsec pool POOL prefix 10.3.0.0/24
set vpn ipsec site-to-site peer PEER pool POOL
set interfaces dum0 address 10.1.0.1/24
set vpn ipsec site-to-site peer PEER connection-type respond
set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24
set protocols static route 10.3.0.0/24 interface eth0
set vpn ipsec esp-group CHILD-SA mode tunnel

Step 2: Set the following configuration in DUT1:

set interfaces eth0 address 80.0.0.2/24
set vpn ipsec auth-profile AUTH-SA local auth pre-shared-secret test
set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128
set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19
set vpn ipsec ike-group IKE-SA key-exchange ikev2
set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19
set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128
set vpn ipsec ike-group IKE-SA proposal 1 hash sha256
set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA
set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA
set vpn ipsec site-to-site peer PEER ike-group IKE-SA
set interfaces dum0
set vpn ipsec site-to-site peer PEER install-vips interface dum0
set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1
set vpn ipsec site-to-site peer PEER connection-type initiate
set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24

set protocols static route 10.1.0.0/24 interface eth0
set vpn ipsec esp-group CHILD-SA mode tunnel

Step 3: Ping IP address 80.0.0.1 from DUT1:

admin@DUT1$ ping 80.0.0.1 count 1 size 56 timeout 1
Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data.
64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.388 ms

--- 80.0.0.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.388/0.388/0.388/0.000 ms

Step 4: Ping IP address 80.0.0.2 from DUT0:

admin@DUT0$ ping 80.0.0.2 count 1 size 56 timeout 1
Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data.
64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.300 ms

--- 80.0.0.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.300/0.300/0.300/0.000 ms

Step 5: Set the following configuration in DUT2:

set vpn ipsec auth-profile AUTH-SA local auth pre-shared-secret test
set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128
set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19
set vpn ipsec ike-group IKE-SA key-exchange ikev2
set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19
set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128
set vpn ipsec ike-group IKE-SA proposal 1 hash sha256
set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA
set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA
set vpn ipsec site-to-site peer PEER ike-group IKE-SA
set interfaces dum0
set vpn ipsec site-to-site peer PEER install-vips interface dum0
set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1
set vpn ipsec site-to-site peer PEER connection-type initiate
set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24

set interfaces eth0 address 80.0.0.3/24
set protocols static route 10.1.0.0/24 interface eth0

Step 6: Run command interfaces dummy dum0 show at DUT1 and expect this output:

Show output
-----------------------------------------------------------------
Name           IP Address           Admin  Oper  Vrf  Description
-----------------------------------------------------------------
dum0  10.3.0.1/32                   up     up
      fe80::e8ce:2fff:fe89:5db2/64

Step 7: Run command vpn ipsec show sa at DUT1 and check if output matches the following regular expressions:

peer-PEER-tunnel-\d+.+INSTALLED
Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 49d9d39ca9193ec9_i* 97d7c9f0d62975a4_r
  local  '80.0.0.2' @ 80.0.0.2[500] [10.3.0.1]
  remote '80.0.0.1' @ 80.0.0.1[500]
  AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256
  established 4s ago, rekeying in 17930s
  peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256
    installed 4s ago, rekeying in 3295s, expires in 3956s
    in  c0c19966,      0 bytes,     0 packets
    out cc76db2e,      0 bytes,     0 packets
    local  10.3.0.1/32
    remote 10.1.0.0/24

Step 8: Ping IP address 10.1.0.1 from DUT1:

admin@DUT1$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1
Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data.
64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.347 ms

--- 10.1.0.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.347/0.347/0.347/0.000 ms

Step 9: Initiate a tcp connection from DUT1 to DUT0 and try to send some messages between both endpoints

admin@DUT0$ monitor test connection server 8080 tcp
admin@DUT1$ monitor test connection client 10.1.0.1 8080 tcp local-address 10.3.0.1

Step 10: Run command vpn ipsec show sa at DUT1 and check if output matches the following regular expressions:

[1-9]\d? packets
Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 49d9d39ca9193ec9_i* 97d7c9f0d62975a4_r
  local  '80.0.0.2' @ 80.0.0.2[500] [10.3.0.1]
  remote '80.0.0.1' @ 80.0.0.1[500]
  AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256
  established 7s ago, rekeying in 17927s
  peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256
    installed 7s ago, rekeying in 3292s, expires in 3953s
    in  c0c19966,    868 bytes,    14 packets,     0s ago
    out cc76db2e,    920 bytes,    15 packets,     0s ago
    local  10.3.0.1/32
    remote 10.1.0.0/24

Step 11: Run command interfaces dummy dum0 show at DUT2 and expect this output:

Show output
-----------------------------------------------------------------
Name           IP Address           Admin  Oper  Vrf  Description
-----------------------------------------------------------------
dum0  10.3.0.2/32                   up     up
      fe80::5c06:98ff:fe02:5a82/64

Step 12: Run command vpn ipsec show sa at DUT2 and check if output matches the following regular expressions:

peer-PEER-tunnel-\d+.+INSTALLED
Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 33b8aac6459d2f4c_i* ac39b239b4740499_r
  local  '80.0.0.3' @ 80.0.0.3[500] [10.3.0.2]
  remote '80.0.0.1' @ 80.0.0.1[500]
  AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256
  established 4s ago, rekeying in 27245s
  peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256
    installed 4s ago, rekeying in 3246s, expires in 3956s
    in  c10c3e7a,      0 bytes,     0 packets
    out c43b000e,      0 bytes,     0 packets
    local  10.3.0.2/32
    remote 10.1.0.0/24

Step 13: Ping IP address 10.1.0.1 from DUT2:

admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.2 count 1 size 56 timeout 1
Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.2 : 56(84) bytes of data.
64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.428 ms

--- 10.1.0.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.428/0.428/0.428/0.000 ms

Step 14: Initiate a tcp connection from DUT2 to DUT0 and try to send some messages between both endpoints

admin@DUT0$ monitor test connection server 8080 tcp
admin@DUT2$ monitor test connection client 10.1.0.1 8080 tcp local-address 10.3.0.2

Step 15: Run command vpn ipsec show sa at DUT2 and check if output matches the following regular expressions:

[1-9]\d? packets
Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 33b8aac6459d2f4c_i* ac39b239b4740499_r
  local  '80.0.0.3' @ 80.0.0.3[500] [10.3.0.2]
  remote '80.0.0.1' @ 80.0.0.1[500]
  AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256
  established 7s ago, rekeying in 27242s
  peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256
    installed 7s ago, rekeying in 3243s, expires in 3953s
    in  c10c3e7a,    868 bytes,    14 packets,     0s ago
    out c43b000e,    920 bytes,    15 packets,     0s ago
    local  10.3.0.2/32
    remote 10.1.0.0/24

Step 16: Run command vpn ipsec show pool summary at DUT0 and check if output matches the following regular expressions:

2\s+0\s+\d+
Show output
--------------------------------------
pool  base IP   online  offline  total
--------------------------------------
POOL  10.3.0.0       2        0    254