wlan ---- .. osdx:cfgcmd:: controllers wlan .. raw:: html M10-Smart M2 RS420 Configuration of WLAN-device and radio-modules .. osdx:cfgcmd:: controllers wlan country .. raw:: html M10-Smart M2 RS420 Country selection :arg txt: ISO 3166-1 alpha-2 country ID where the device is located (2) .. osdx:cfgcmd:: controllers wlan installation .. raw:: html M10-Smart M2 RS420 Device installation .. osdx:cfgcmd:: controllers wlan installation indoor .. raw:: html M10-Smart M2 RS420 Device operates indoors .. osdx:cfgcmd:: controllers wlan installation outdoor .. raw:: html M10-Smart M2 RS420 Device operates outdoors .. osdx:cfgcmd:: controllers wlan radios .. raw:: html M10-Smart M2 RS420 WLAN Radio device configuration :arg txt: Radio device name :instances: Multiple .. osdx:cfgcmd:: controllers wlan radios antenna-selection .. raw:: html M10-Smart M2 RS420 List of antennas to be used for sending/receiving .. osdx:cfgcmd:: controllers wlan radios antenna-selection rx .. raw:: html M10-Smart M2 RS420 List of antennas to be used for receiving (ALL if empty) :arg txt: List of antenna names, comma-separated :instances: Multiple .. osdx:cfgcmd:: controllers wlan radios antenna-selection tx .. raw:: html M10-Smart M2 RS420 List of antennas to be used for sending (ALL if empty) :arg txt: List of antenna names, comma-separated :instances: Multiple .. osdx:cfgcmd:: controllers wlan radios auto-channel-selection .. raw:: html M10-Smart M2 RS420 Settings for automatic channel selection .. osdx:cfgcmd:: controllers wlan radios auto-channel-selection blocked-channels .. raw:: html M10-Smart M2 RS420 Channels to avoid when performing auto-channel selection :arg u32: List of channels, comma-separated .. osdx:cfgcmd:: controllers wlan radios background-scanning .. raw:: html M10-Smart M2 RS420 Neighbor background scanning parameters .. osdx:cfgcmd:: controllers wlan radios background-scanning enable .. raw:: html M10-Smart M2 RS420 Enable neighbor background scanning on this radio module .. osdx:cfgcmd:: controllers wlan radios background-scanning sweep-interval .. raw:: html M10-Smart M2 RS420 Number of seconds the neighbors are kept in the database if not seen again :arg u32: Neighbors maximum age (60-86400) .. osdx:cfgcmd:: controllers wlan radios band .. raw:: html M10-Smart M2 RS420 WLAN frequency band where the radio device operates :arg txt: Base frequency in Gigahertz .. osdx:cfgcmd:: controllers wlan radios beacon-interval .. raw:: html M10-Smart M2 RS420 Time between two consecutive beacon frames :arg u32: Time in milliseconds (40-3500) .. osdx:cfgcmd:: controllers wlan radios channel .. raw:: html M10-Smart M2 RS420 Operational 802.11 WLAN channel :arg "auto": Auto-channel selection :arg u32: Channel number .. osdx:cfgcmd:: controllers wlan radios disable .. raw:: html M10-Smart M2 RS420 Disable radio device .. osdx:cfgcmd:: controllers wlan radios disable-short-gi .. raw:: html M10-Smart M2 RS420 Disable short guard-interval .. osdx:cfgcmd:: controllers wlan radios mode .. raw:: html M10-Smart M2 RS420 List of WLAN modes allowed by this radio device :arg txt: 802.11 WLAN mode :instances: Multiple .. osdx:cfgcmd:: controllers wlan radios tx-power .. raw:: html M10-Smart M2 RS420 Conducted transmission power used by the radio device .. osdx:cfgcmd:: controllers wlan radios tx-power dbm .. raw:: html M10-Smart M2 RS420 Conducted transmission power, in dBm, used by the radio device :arg u32: Transmission power in dBm