pim --- .. osdx:cfgcmd:: protocols pim .. raw:: html SDE M10-Smart M2 RS420 AresC640 Protocol Independent Multicast (PIM) parameters .. osdx:cfgcmd:: protocols pim join-prune-interval .. raw:: html SDE M10-Smart M2 RS420 AresC640 Join/Prune send interval :arg u32: Join/Prune send interval in seconds (1-65535) .. osdx:cfgcmd:: protocols pim keep-alive-timer .. raw:: html SDE M10-Smart M2 RS420 AresC640 Keep alive timer for a (S,G) flow :arg u32: Keep alive timer value in seconds (1-65535) .. osdx:cfgcmd:: protocols pim never-spt-switchover .. raw:: html SDE M10-Smart M2 RS420 AresC640 Not switch over to the SPT tree after receiving the first multicast traffic packet on the Last Hop Router (LHR) .. osdx:cfgcmd:: protocols pim never-spt-switchover prefix-list .. raw:: html SDE M10-Smart M2 RS420 AresC640 Prefix-list to control for which groups not to switch over to the SPT tree :ref Reference: protocols ip prefix-list * .. osdx:cfgcmd:: protocols pim never-ssm-list .. raw:: html SDE M10-Smart M2 RS420 AresC640 Prefix-list to avoid doing SSM over a range of group addresses :ref Reference: protocols ip prefix-list * .. osdx:cfgcmd:: protocols pim register-accept-list .. raw:: html SDE M10-Smart M2 RS420 AresC640 Prefix-list to prevent unauthorized sources from sending REGISTER messages to the RP :ref Reference: protocols ip prefix-list * .. osdx:cfgcmd:: protocols pim register-suppress-time .. raw:: html SDE M10-Smart M2 RS420 AresC640 Register suppression mechanism timer :arg u32: Register suppression mechanism timer in seconds (11-65535) .. osdx:cfgcmd:: protocols pim rp .. raw:: html SDE M10-Smart M2 RS420 AresC640 PIM Rendezvous Point (RP) parameters .. osdx:cfgcmd:: protocols pim rp address .. raw:: html SDE M10-Smart M2 RS420 AresC640 IP address of the RP :arg ipv4: IP address of the RP :instances: Multiple :ref Required: .. osdx:cfgcmd:: protocols pim rp address group .. raw:: html SDE M10-Smart M2 RS420 AresC640 Multicast group address range :arg ipv4net: Multicast group Address range to cover :instances: Multiple .. osdx:cfgcmd:: protocols pim rp keep-alive-timer .. raw:: html SDE M10-Smart M2 RS420 AresC640 Keep alive timer for a (S,G) flow at the RP :arg u32: Keep alive timer value in seconds (by default: 3 * register-suppress-time + 5) (1-65535)