ntp --- .. osdx:cfgcmd:: system ntp .. raw:: html SDE M10-Smart M2 RS420 AresC640 Network Time Protocol (NTP) configuration .. osdx:cfgcmd:: system ntp authenticate .. raw:: html SDE M10-Smart M2 RS420 AresC640 Authenticate option .. osdx:cfgcmd:: system ntp authenticate disable .. raw:: html SDE M10-Smart M2 RS420 AresC640 Disable authentication (enabled by default) .. osdx:cfgcmd:: system ntp authentication-key .. raw:: html SDE M10-Smart M2 RS420 AresC640 Key ID used for authentication :arg u32: Key ID (1-65534) :instances: Multiple :ref Required: .. osdx:cfgcmd:: system ntp authentication-key algorithm .. raw:: html SDE M10-Smart M2 RS420 AresC640 :arg txt: Algorithm to use for authentication .. osdx:cfgcmd:: system ntp authentication-key encrypted-key .. raw:: html SDE M10-Smart M2 RS420 AresC640 :arg password: Encrypted message for authentication .. osdx:cfgcmd:: system ntp authentication-key key .. raw:: html SDE M10-Smart M2 RS420 AresC640 :arg txt: Message for authentication .. osdx:cfgcmd:: system ntp broadcast .. raw:: html SDE M10-Smart M2 RS420 AresC640 Broadcast/Multicast mode association "The IANA has assigned the multicast group address IPv4 224.0.1.1 and IPv6 ff05::101 exclusively to NTP" :arg ipv4: Broadcast/Multicast IP address :arg ipv6: Broadcast/Multicast IPv6 address :instances: Multiple .. osdx:cfgcmd:: system ntp broadcast key .. raw:: html SDE M10-Smart M2 RS420 AresC640 Key ID used for authentication :arg u32: Key ID (1-65534) .. osdx:cfgcmd:: system ntp broadcast max-poll .. raw:: html SDE M10-Smart M2 RS420 AresC640 Maximum poll interval in seconds as a power of two :arg u32: Maximum poll interval in seconds as a power of two (3-17) .. osdx:cfgcmd:: system ntp broadcast min-poll .. raw:: html SDE M10-Smart M2 RS420 AresC640 Minimum poll interval in seconds as a power of two :arg u32: Minimum poll interval in seconds as a power of two (3-17) .. osdx:cfgcmd:: system ntp broadcast ttl .. raw:: html SDE M10-Smart M2 RS420 AresC640 Time-to-life to use on broadcast/multicast server :arg u32: Time-to-life to use on broadcast/multicast server (0-7) .. osdx:cfgcmd:: system ntp broadcast version .. raw:: html SDE M10-Smart M2 RS420 AresC640 NTP version used :arg u32: NTP versions allowed (1-4) .. osdx:cfgcmd:: system ntp broadcast-client .. raw:: html SDE M10-Smart M2 RS420 AresC640 Enables reception of broadcast server messages to any local interface .. osdx:cfgcmd:: system ntp broadcast-delay .. raw:: html SDE M10-Smart M2 RS420 AresC640 Network delay between the local and remote servers :arg u32: Delay in microseconds (3-7) .. osdx:cfgcmd:: system ntp client .. raw:: html SDE M10-Smart M2 RS420 AresC640 Network Time Protocol (NTP) client .. osdx:cfgcmd:: system ntp client address .. raw:: html SDE M10-Smart M2 RS420 AresC640 IP address :arg ipv4: IP address :arg ipv6: IPv6 address :instances: Multiple .. osdx:cfgcmd:: system ntp logging .. raw:: html SDE M10-Smart M2 RS420 AresC640 NTP logging :instances: Unique .. osdx:cfgcmd:: system ntp logging all .. raw:: html SDE M10-Smart M2 RS420 AresC640 Apply log level to all existing types. .. osdx:cfgcmd:: system ntp logging type .. raw:: html SDE M10-Smart M2 RS420 AresC640 Apply to specific log types. :arg info: General information logs :arg events: General event logs :arg status: Status logs :arg statistics: Statistics logs :arg clock: Clock related logs :arg peer: Peer related logs :arg sys: System related logs :arg sync: Synchronization logs :instances: List of values .. osdx:cfgcmd:: system ntp master .. raw:: html SDE M10-Smart M2 RS420 AresC640 Reference Clock .. osdx:cfgcmd:: system ntp master prefer .. raw:: html SDE M10-Smart M2 RS420 AresC640 Marks the Reference Clock as preferred .. osdx:cfgcmd:: system ntp master stratum .. raw:: html SDE M10-Smart M2 RS420 AresC640 Stratum number assigned to Reference Clock :arg u32: Stratum number (0-15) .. osdx:cfgcmd:: system ntp multicast-client .. raw:: html SDE M10-Smart M2 RS420 AresC640 Enables reception of multicast server messages to the multicast group address(es) specified :arg ipv4: IP address :arg ipv6: IPv6 address :instances: Multiple .. osdx:cfgcmd:: system ntp peer .. raw:: html SDE M10-Smart M2 RS420 AresC640 Network Time Protocol (NTP) peer :arg ipv4: IP address :arg ipv6: IPv6 address :instances: Multiple .. osdx:cfgcmd:: system ntp peer key .. raw:: html SDE M10-Smart M2 RS420 AresC640 Key ID used for authentication :arg u32: Key ID (1-65534) .. osdx:cfgcmd:: system ntp peer local-address .. raw:: html SDE M10-Smart M2 RS420 AresC640 Local IP address to use as source for requests to this peer :arg ipv4: Local IPv4 address for this peer :arg ipv6: Local IPv6 address for this peer :Local IP address: .. osdx:cfgcmd:: system ntp peer local-interface .. raw:: html SDE M10-Smart M2 RS420 AresC640 :arg ifc: Interface to use as source for requests to this peer .. osdx:cfgcmd:: system ntp peer local-vrf .. raw:: html SDE M10-Smart M2 RS420 AresC640 VRF where socket is bound :ref Reference: system vrf * .. osdx:cfgcmd:: system ntp peer max-poll .. raw:: html SDE M10-Smart M2 RS420 AresC640 Maximum poll interval in seconds as a power of two :arg u32: Maximum poll interval in seconds as a power of two (3-17) .. osdx:cfgcmd:: system ntp peer min-poll .. raw:: html SDE M10-Smart M2 RS420 AresC640 Minimum poll interval in seconds as a power of two :arg u32: Minimum poll interval in seconds as a power of two (3-17) .. osdx:cfgcmd:: system ntp peer no-select .. raw:: html SDE M10-Smart M2 RS420 AresC640 Marks the server as unused .. osdx:cfgcmd:: system ntp peer prefer .. raw:: html SDE M10-Smart M2 RS420 AresC640 Marks the server as preferred .. osdx:cfgcmd:: system ntp peer version .. raw:: html SDE M10-Smart M2 RS420 AresC640 NTP version used :arg u32: NTP versions allowed (1-4) .. osdx:cfgcmd:: system ntp server .. raw:: html SDE M10-Smart M2 RS420 AresC640 Network Time Protocol (NTP) server .. osdx:cfgcmd:: system ntp server address .. raw:: html SDE M10-Smart M2 RS420 AresC640 :arg fqdn: IP address or name of the server :arg ipv4: IP address or name of the server :arg ipv6: IP address or name of the server :instances: Multiple .. osdx:cfgcmd:: system ntp server address burst .. raw:: html SDE M10-Smart M2 RS420 AresC640 Send a burst of eight packets when the server is reachable .. osdx:cfgcmd:: system ntp server address key .. raw:: html SDE M10-Smart M2 RS420 AresC640 Key-ID used for authentication :arg u32: Key ID (1-65534) .. osdx:cfgcmd:: system ntp server address local-address .. raw:: html SDE M10-Smart M2 RS420 AresC640 Local IP address to use as source for requests to this server :arg ipv4: Local IPv4 address for this server :arg ipv6: Local IPv6 address for this server :Local IP address: .. osdx:cfgcmd:: system ntp server address local-interface .. raw:: html SDE M10-Smart M2 RS420 AresC640 :arg ifc: Interface to use as source for requests to this server .. osdx:cfgcmd:: system ntp server address local-vrf .. raw:: html SDE M10-Smart M2 RS420 AresC640 VRF where socket is bound :ref Reference: system vrf * .. osdx:cfgcmd:: system ntp server address max-poll .. raw:: html SDE M10-Smart M2 RS420 AresC640 Maximum poll interval in seconds as a power of two :arg u32: Maximum poll interval in seconds as a power of two (3-17) .. osdx:cfgcmd:: system ntp server address min-poll .. raw:: html SDE M10-Smart M2 RS420 AresC640 Minimum poll interval in seconds as a power of two :arg u32: Minimum poll interval in seconds as a power of two (3-17) .. osdx:cfgcmd:: system ntp server address no-select .. raw:: html SDE M10-Smart M2 RS420 AresC640 Marks the server as unused .. osdx:cfgcmd:: system ntp server address preempt .. raw:: html SDE M10-Smart M2 RS420 AresC640 Specifies the association as preemptable rather than the default persistent .. osdx:cfgcmd:: system ntp server address prefer .. raw:: html SDE M10-Smart M2 RS420 AresC640 Marks the server as preferred .. osdx:cfgcmd:: system ntp server address version .. raw:: html SDE M10-Smart M2 RS420 AresC640 NTP version used :arg u32: NTP versions allowed (1-4) .. osdx:cfgcmd:: system ntp server dhcp .. raw:: html SDE M10-Smart M2 RS420 AresC640 Enable configuration discovery via DHCP options .. osdx:cfgcmd:: system ntp server dhcp interface .. raw:: html SDE M10-Smart M2 RS420 AresC640 :arg ifc: Enable configuration discovery via DHCP for specified interface :instances: Multiple .. osdx:cfgcmd:: system ntp trusted-key .. raw:: html SDE M10-Smart M2 RS420 AresC640 Key(s) ID used for authentication :arg u32: Key ID (1-65534) :instances: Multiple