wlan
----
.. osdx:cfgcmd:: controllers wlan
.. raw:: html
M10-Smart
M2
RS420
Configuration of WLAN-device and radio-modules
.. osdx:cfgcmd:: controllers wlan country
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
Code of the country where the device is located
.. osdx:cfgcmd:: controllers wlan installation
.. raw:: html
M10-Smart
M2
RS420
Device installation (indoor, outdoor)
.. osdx:cfgcmd:: controllers wlan installation indoor
.. raw:: html
M10-Smart
M2
RS420
Device can operate indoors
.. osdx:cfgcmd:: controllers wlan installation outdoor
.. raw:: html
M10-Smart
M2
RS420
Device can operate outdoors
.. osdx:cfgcmd:: controllers wlan radios
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
Configuration per module
:instances: Multiple
.. osdx:cfgcmd:: controllers wlan radios antenna-selection
.. raw:: html
M10-Smart
M2
RS420
List of antennas to be used for sending/receiving (ALL available, if not specified)
.. osdx:cfgcmd:: controllers wlan radios antenna-selection rx
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
List of antennas to be used for receiving (ALL available, if list is empty)
:instances: Multiple
.. osdx:cfgcmd:: controllers wlan radios antenna-selection tx
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
List of antennas to be used for sending (ALL available, if list is empty)
:instances: Multiple
.. osdx:cfgcmd:: controllers wlan radios auto-channel-selection
.. raw:: html
M10-Smart
M2
RS420
Settings for automatic channel selection
.. osdx:cfgcmd:: controllers wlan radios auto-channel-selection blocked-channels
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
Comma-separated list of channels to be avoided in ACS
.. osdx:cfgcmd:: controllers wlan radios background-scanning
.. raw:: html
M10-Smart
M2
RS420
Neighbor background scanning parameters
.. osdx:cfgcmd:: controllers wlan radios background-scanning enable
.. raw:: html
M10-Smart
M2
RS420
Enable neighbor background scanning on this radio module
.. osdx:cfgcmd:: controllers wlan radios background-scanning sweep-interval
.. raw:: html
M10-Smart
M2
RS420
Number of seconds the neighbors are kept in the database if not seen again
:arg u32:
Neighbors maximum age (60-86400)
.. osdx:cfgcmd:: controllers wlan radios band
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
Physical device controller frequency band as 2.4 and 5 ghz band
.. osdx:cfgcmd:: controllers wlan radios beacon-interval
.. raw:: html
M10-Smart
M2
RS420
Beacon-interval in ms (split-up into sub-intervals in multi-VAP-case).
:arg u32:
Beacon-transmit-period in ms. In case of multiple VAPs, individual VAP-beacons are spread evenly over it. For example, if four VAPs are created and if the beacon-interval is 200 ms, the radio will transmit one beacon every 50 ms. (40-3500)
.. osdx:cfgcmd:: controllers wlan radios channel
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
Operating channel
.. osdx:cfgcmd:: controllers wlan radios disable
.. raw:: html
M10-Smart
M2
RS420
Disable radio controller
.. osdx:cfgcmd:: controllers wlan radios mode
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
List of allowed 802.11 modes
:instances: Multiple
.. osdx:cfgcmd:: controllers wlan radios short-gi
.. raw:: html
M10-Smart
M2
RS420
Choose whether to use short or long guard-interval for this radio
:arg true:
Use short guard-interval for this radio (default)
:arg false:
Use long guard-interval for this radio
.. osdx:cfgcmd:: controllers wlan radios tx-power
.. raw:: html
M10-Smart
M2
RS420
Transmission power
.. osdx:cfgcmd:: controllers wlan radios tx-power dbm
.. raw:: html
M10-Smart
M2
RS420
:arg txt:
Transmission power (dbm)