wlan

controllers wlan

M10-Smart M2 RS420

Configuration of WLAN-device and radio-modules

controllers wlan country <txt>

M10-Smart M2 RS420

Values

• txt – Code of the country where the device is located

controllers wlan installation

M10-Smart M2 RS420

Device installation (indoor, outdoor)

controllers wlan installation indoor

M10-Smart M2 RS420

Device can operate indoors

controllers wlan installation outdoor

M10-Smart M2 RS420

Device can operate outdoors

controllers wlan radios <txt>

M10-Smart M2 RS420

Values

• txt – Configuration per module

Instances

Multiple

controllers wlan radios <txt> antenna-selection

M10-Smart M2 RS420

List of antennas to be used for sending/receiving (ALL available, if not specified)

controllers wlan radios <txt> antenna-selection rx <txt>

M10-Smart M2 RS420

Values

• txt – List of antennas to be used for receiving (ALL available, if list is empty)

Instances

Multiple

controllers wlan radios <txt> antenna-selection tx <txt>

M10-Smart M2 RS420

Values

• txt – List of antennas to be used for sending (ALL available, if list is empty)

Instances

Multiple

controllers wlan radios <txt> auto-channel-selection

M10-Smart M2 RS420

Settings for automatic channel selection

controllers wlan radios <txt> auto-channel-selection blocked-channels <txt>

M10-Smart M2 RS420

Values

• txt – Comma-separated list of channels to be avoided in ACS

controllers wlan radios <txt> background-scanning

M10-Smart M2 RS420

Neighbor background scanning parameters

controllers wlan radios <txt> background-scanning enable

M10-Smart M2 RS420

Enable neighbor background scanning on this radio module

controllers wlan radios <txt> background-scanning sweep-interval <u32>

M10-Smart M2 RS420

Number of seconds the neighbors are kept in the database if not seen again

Values

• u32 – Neighbors maximum age (60-86400)

controllers wlan radios <txt> band <txt>

M10-Smart M2 RS420

Values

• txt – Physical device controller frequency band as 2.4 and 5 ghz band

controllers wlan radios <txt> beacon-interval <u32>

M10-Smart M2 RS420

Beacon-interval in ms (split-up into sub-intervals in multi-VAP-case).

Values

• u32 – Beacon-transmit-period in ms. In case of multiple VAPs, individual VAP-beacons are spread evenly over it. For example, if four VAPs are created and if the beacon-interval is 200 ms, the radio will transmit one beacon every 50 ms. (40-3500)

controllers wlan radios <txt> channel <txt>

M10-Smart M2 RS420

Values

• txt – Operating channel

controllers wlan radios <txt> disable

M10-Smart M2 RS420

Disable radio controller

controllers wlan radios <txt> mode <txt>

M10-Smart M2 RS420

Values

• txt – List of allowed 802.11 modes

Instances

Multiple

controllers wlan radios <txt> short-gi <bool>

M10-Smart M2 RS420

Choose whether to use short or long guard-interval for this radio

Values

• true – Use short guard-interval for this radio (default)

• false – Use long guard-interval for this radio

controllers wlan radios <txt> tx-power

M10-Smart M2 RS420

Transmission power

controllers wlan radios <txt> tx-power dbm <txt>

M10-Smart M2 RS420

Values

• txt – Transmission power (dbm)