ethernet
- interfaces ethernet <txt>
- SDE
M10-Smart
M2
RS420
Ethernet interface name
- Values
ethN – Ethernet interface name
- Instances
Multiple
- interfaces ethernet <txt> 802.1x
- SDE
M10-Smart
M2
RS420
802.1x section, use authenticator or supplicant mode
- Instances
Unique
- interfaces ethernet <txt> 802.1x authenticator
- SDE
M10-Smart
M2
RS420
802.1x authenticator mode
- Required
- interfaces ethernet <txt> 802.1x authenticator aaa
- SDE
M10-Smart
M2
RS420
AAA parameters
- Required
- interfaces ethernet <txt> 802.1x authenticator aaa accounting <id>
- SDE
M10-Smart
M2
RS420
Accounting list
- Reference
- interfaces ethernet <txt> 802.1x authenticator aaa authentication <id>
- SDE
M10-Smart
M2
RS420
Authentication list
- Reference
- interfaces ethernet <txt> 802.1x supplicant
- SDE
M10-Smart
M2
RS420
802.1x supplicant mode
- Required
- Required
- interfaces ethernet <txt> 802.1x supplicant encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password to authenticate with
- interfaces ethernet <txt> 802.1x supplicant password <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Password to authenticate with
- interfaces ethernet <txt> 802.1x supplicant username <id>
- SDE
M10-Smart
M2
RS420
- Values
id – Username to authenticate with
- interfaces ethernet <txt> address <ipv4cidr|ipv6cidr|id>
- SDE
M10-Smart
M2
RS420
IP address
- Values
ipv6cidr – IPv6 address and prefix length
dhcpv6 – Dynamic Host Configuration Protocol for IPv6
ipv4cidr – IPv4 address and prefix length
dhcp – Dynamic Host Configuration Protocol
- Instances
Multiple
- interfaces ethernet <txt> alarm
- SDE
M10-Smart
M2
RS420
Enable or disable alarm according the link state
- interfaces ethernet <txt> alarm down <txt>
- SDE
M10-Smart
M2
RS420
Alarm to be enabled if the link is down
- Reference
- interfaces ethernet <txt> bond-group <txt>
- SDE
Assign interface to bonding group
- Reference
- interfaces ethernet <txt> bridge-group
- SDE
M10-Smart
M2
RS420
Add this interface to a bridge group
- Required
- interfaces ethernet <txt> bridge-group allowed-macs <macaddr>
- SDE
M10-Smart
M2
RS420
- Values
macaddr – Allowed Macs list (only for switch ports)
- Instances
Multiple
- interfaces ethernet <txt> bridge-group bridge <txt>
- SDE
M10-Smart
M2
RS420
Bridge group name (br[0-9]+)
- Reference
- interfaces ethernet <txt> bridge-group stp
- SDE
M10-Smart
M2
RS420
Bridge port Spanning Tree Protocol configuration
- interfaces ethernet <txt> bridge-group stp admin-edge
- SDE
M10-Smart
M2
RS420
Enable the admin edge state
- interfaces ethernet <txt> bridge-group stp bpdu-filter
- SDE
M10-Smart
M2
RS420
Enable the BPDU filter capability If enabled, this port will discard any ingress BPDUs and will not issue any BPUs
- interfaces ethernet <txt> bridge-group stp bpdu-guard
- SDE
M10-Smart
M2
RS420
Enable the bpduguard configuration
- interfaces ethernet <txt> bridge-group stp cost <u32>
- SDE
M10-Smart
M2
RS420
Bridge port cost
- Values
u32 – Auto (0)
u32 – Bridge port cost (1-65535)
- interfaces ethernet <txt> bridge-group stp disable-auto-edge
- SDE
M10-Smart
M2
RS420
Enable the auto transition to/from edge state
- interfaces ethernet <txt> bridge-group stp network-assurance
- SDE
M10-Smart
M2
RS420
Enable the bridge assurance capability
- interfaces ethernet <txt> bridge-group stp p2p <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Enable Point-2-Point (P2P) detection mode
- interfaces ethernet <txt> bridge-group stp priority <u32>
- SDE
M10-Smart
M2
RS420
Bridge port priority
- Values
u32 – Bridge port priority (0-15)
- interfaces ethernet <txt> bridge-group vlan <u32>
- SDE
M10-Smart
M2
RS420
Enable VLAN in this bridge port
- Values
u32 – VLAN ID (1-4094)
- Instances
Multiple
- interfaces ethernet <txt> bridge-group vlan <u32> pvid
- SDE
M10-Smart
M2
RS420
This VLAN specified is to be considered a PVID at ingress Any untagged frames will be assigned to this VLAN
- interfaces ethernet <txt> bridge-group vlan <u32> untagged
- SDE
M10-Smart
M2
RS420
This VLAN is to be treated as untagged on egress The bridge will always remove the VLAN tag from egress packets
- interfaces ethernet <txt> description <id>
- SDE
M10-Smart
M2
RS420
Description
- Values
id – “Interface description is too long (limit 256 characters)” (1-256)
- interfaces ethernet <txt> dhcp
- SDE
M10-Smart
M2
RS420
Dynamic Host Configuration Protocol configuration
- interfaces ethernet <txt> dhcp client
- SDE
M10-Smart
M2
RS420
DHCP client configuration
- interfaces ethernet <txt> dhcp client fallback <ipv4cidr|ipv6cidr>
- SDE
M10-Smart
M2
RS420
- Values
ipv4cidr – Fallback IP address
ipv6cidr – Fallback IP address
- interfaces ethernet <txt> dhcp client rfc3442-routes
- SDE
M10-Smart
M2
RS420
Install RFC3442 routes received from DHCP server
- interfaces ethernet <txt> dhcp client send
- SDE
M10-Smart
M2
RS420
Send user-defined options to the DHCP server
- interfaces ethernet <txt> dhcp client send dhcp-client-identifier
- SDE
M10-Smart
M2
RS420
Include the ‘dhcp-client-identifier’ option
- Instances
Unique
- interfaces ethernet <txt> dhcp client send dhcp-client-identifier base-mac
- SDE
M10-Smart
M2
RS420
Use device base mac as identifier
- interfaces ethernet <txt> dhcp client send dhcp-client-identifier serial-number
- SDE
M10-Smart
M2
RS420
Use device serial number as identifier
- interfaces ethernet <txt> dhcp client send dhcp-client-identifier string <id>
- SDE
M10-Smart
M2
RS420
Use a string as identifier
- Values
id – Identifier string (1-255)
- interfaces ethernet <txt> dhcp client send vendor-class-identifier
- SDE
M10-Smart
M2
RS420
Include the ‘vendor-class-identifier’ option
- Instances
Unique
- interfaces ethernet <txt> dhcp client send vendor-class-identifier string <id>
- SDE
M10-Smart
M2
RS420
Use a string as identifier
- Values
id – Identifier string (1-255)
- interfaces ethernet <txt> dhcpv6
- SDE
M10-Smart
M2
RS420
Dynamic Host Configuration Protocol v6 configuration
- interfaces ethernet <txt> dhcpv6 client
- SDE
M10-Smart
M2
RS420
DHCPv6 client configuration
- interfaces ethernet <txt> dhcpv6 client parameters-only
- SDE
M10-Smart
M2
RS420
Acquire only config parameters, not address
- interfaces ethernet <txt> dhcpv6 client send
- SDE
M10-Smart
M2
RS420
Send user-defined options to the DHCPv6 server
- interfaces ethernet <txt> dhcpv6 client send duid <id>
- SDE
M10-Smart
M2
RS420
- Values
id – DHCPv6 DUID to be sent by dhcpv6 client
- interfaces ethernet <txt> dhcpv6 client temporary
- SDE
M10-Smart
M2
RS420
IPv6 “temporary” address
- interfaces ethernet <txt> disable
- SDE
M10-Smart
M2
RS420
Disable interface
- interfaces ethernet <txt> disable advisor <txt>
- SDE
M10-Smart
M2
RS420
Advisor to enable or disable the interface
- Reference
- interfaces ethernet <txt> disable-flow-control
- SDE
M10-Smart
M2
RS420
Disable Ethernet flow control (pause frames)
- interfaces ethernet <txt> disable-offload
- SDE
M10-Smart
M2
RS420
Disable offload engine in this interface
- interfaces ethernet <txt> duplex <id>
- SDE
M10-Smart
M2
RS420
Duplex mode
- Values
auto – Auto negotiation
half – Half duplex
full – Full duplex
- interfaces ethernet <txt> flow
- SDE
M10-Smart
M2
RS420
Active netflow on interface
- interfaces ethernet <txt> flow egress
- SDE
M10-Smart
M2
RS420
Active output traffic
- interfaces ethernet <txt> flow egress selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> flow ingress
- SDE
M10-Smart
M2
RS420
Active input traffic
- interfaces ethernet <txt> flow ingress selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> ip
- SDE
M10-Smart
M2
RS420
IPv4 routing parameters
- interfaces ethernet <txt> ip arp
- SDE
M10-Smart
M2
RS420
ARP options
- interfaces ethernet <txt> ip arp ignore
- SDE
M10-Smart
M2
RS420
Enable arp-ignore on this interface
- interfaces ethernet <txt> ip arp no-filter
- SDE
M10-Smart
M2
RS420
Disable arp-filter on this interface
- interfaces ethernet <txt> ip arp no-notify
- SDE
M10-Smart
M2
RS420
Disable arp_notify on this interface
- interfaces ethernet <txt> ip arp proxy
- SDE
M10-Smart
M2
RS420
Enable proxy-arp on this interface
- interfaces ethernet <txt> ip arp pvlan-proxy
- SDE
M10-Smart
M2
RS420
Enable private VLAN proxy ARP on this interface
- interfaces ethernet <txt> ip arp static <ipv4>
- SDE
M10-Smart
M2
RS420
Static ARP translation
- Values
ipv4 – IPv4 address to add in ARP table
- Instances
Multiple
- Required
- interfaces ethernet <txt> ip arp static <ipv4> mac <macaddr>
- SDE
M10-Smart
M2
RS420
- Values
macaddr – MAC address
- interfaces ethernet <txt> ip arp timeout <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – ARP cache entry timeout in seconds
- interfaces ethernet <txt> ip igmp
- SDE
M10-Smart
M2
RS420
Internet Group Management Protocol (IGMP) parameters
- interfaces ethernet <txt> ip igmp join <ipv4>
- SDE
M10-Smart
M2
RS420
Join multicast group
- Values
ipv4 – Join multicast group on this interface
- interfaces ethernet <txt> ip igmp last-member-query-count <u32>
- SDE
M10-Smart
M2
RS420
IGMP last member query count
- Values
u32 – IGMP last member query count (1-255)
- interfaces ethernet <txt> ip igmp last-member-query-interval <u32>
- SDE
M10-Smart
M2
RS420
IGMP last member query interval
- Values
u32 – IGMP last member query interval in deciseconds (1-65535)
- interfaces ethernet <txt> ip igmp query-interval <u32>
- SDE
M10-Smart
M2
RS420
IGMP query interval
- Values
u32 – IGMP query interval in seconds (1-65535)
- interfaces ethernet <txt> ip igmp query-max-response-time <u32>
- SDE
M10-Smart
M2
RS420
IGMP query response timeout value
- Values
u32 – IGMP query response timeout value in deciseconds (1-65535)
- interfaces ethernet <txt> ip igmp version <u32>
- SDE
M10-Smart
M2
RS420
IGMP version
- Values
u32 – IGMP version used on this interface (2-3)
- interfaces ethernet <txt> ip multicast
- SDE
M10-Smart
M2
RS420
Multicast parameters
- interfaces ethernet <txt> ip multicast boundary-list <txt>
- SDE
M10-Smart
M2
RS420
Prefix-list to control for which groups to accept or ignore received PIM join or IGMP report messages
- Reference
- interfaces ethernet <txt> ip ospf
- SDE
M10-Smart
M2
RS420
Open Shortest Path First (OSPF) parameters
- interfaces ethernet <txt> ip ospf authentication
- SDE
M10-Smart
M2
RS420
OSPF interface authentication
- interfaces ethernet <txt> ip ospf authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> ip ospf authentication message-digest <id>
- SDE
M10-Smart
M2
RS420
MD5 authentication parameters
- Values
id – MD5 ID number (1-255)
- Instances
Multiple
- interfaces ethernet <txt> ip ospf authentication message-digest <id> encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – MD5 encrypted key
- interfaces ethernet <txt> ip ospf authentication message-digest <id> password <txt>
- SDE
M10-Smart
M2
RS420
MD5 key
- Values
txt – MD5 Key (1-16)
- interfaces ethernet <txt> ip ospf authentication password <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Plain text password
- interfaces ethernet <txt> ip ospf bandwidth <u32>
- SDE
M10-Smart
M2
RS420
Bandwidth of interface (kilobits/sec)
- Values
u32 – Bandwidth in kilobits/sec (for calculating OSPF cost) (1-10000000)
- interfaces ethernet <txt> ip ospf cost <u32>
- SDE
M10-Smart
M2
RS420
Interface cost
- Values
u32 – OSPF interface cost (1-65535)
- interfaces ethernet <txt> ip ospf dead-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval after which neighbor is dead
- Values
u32 – OSPF dead interval in seconds (1-65535)
- interfaces ethernet <txt> ip ospf hello-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between hello packets
- Values
u32 – Interval between OSPF hello packets in seconds (1-65535)
- interfaces ethernet <txt> ip ospf mtu-ignore
- SDE
M10-Smart
M2
RS420
Disable Maximum Transmission Unit (MTU) mismatch detection
- interfaces ethernet <txt> ip ospf network <id>
- SDE
M10-Smart
M2
RS420
Network type
- Values
broadcast – Broadcast network type
non-broadcast – Non-broadcast network type
point-to-multipoint – Point-to-multipoint network type
point-to-point – Point-to-point network type
- interfaces ethernet <txt> ip ospf priority <u32>
- SDE
M10-Smart
M2
RS420
Router priority
- Values
u32 – Priority (0-255)
- interfaces ethernet <txt> ip ospf retransmit-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between retransmitting lost link state advertisements
- Values
u32 – Retransmit interval in seconds (3-65535)
- interfaces ethernet <txt> ip ospf transmit-delay <u32>
- SDE
M10-Smart
M2
RS420
Link state transmit delay
- Values
u32 – Transmit delay in seconds (1-65535)
- interfaces ethernet <txt> ip pim
- SDE
M10-Smart
M2
RS420
Protocol Independent Multicast (PIM) parameters
- interfaces ethernet <txt> ip pim disable-bsm
- SDE
M10-Smart
M2
RS420
Disable sending and receiving bootstrap messages
- interfaces ethernet <txt> ip pim disable-unicast-bsm
- SDE
M10-Smart
M2
RS420
Disable sending and receiving unicast bootstrap messages
- interfaces ethernet <txt> ip pim drpriority <u32>
- SDE
M10-Smart
M2
RS420
PIM Designated Router (DR) priority
- Values
u32 – PIM DR priority for the interface (1-4294967295)
- interfaces ethernet <txt> ip pim hello <u32>
- SDE
M10-Smart
M2
RS420
PIM hello interval
- Values
u32 – PIM hello interval in seconds (1-255)
- interfaces ethernet <txt> ip pim passive
- SDE
M10-Smart
M2
RS420
Disable sending and receiving all PIM control messages (such as: ASSERT, BSM, HELLO, JOIN, PRUNE, REGISTER, REGISTER-STOP)
- interfaces ethernet <txt> ip reverse-path-filter <id>
- SDE
M10-Smart
M2
RS420
Policy for source validation by reversed path, as specified in RFC3704
- Values
strict – Enable Strict Reverse Path Forwarding as defined in RFC3704
loose – Enable Loose Reverse Path Forwarding as defined in RFC3704
disable – No source validation
- interfaces ethernet <txt> ip rip
- SDE
M10-Smart
M2
RS420
Routing Information Protocol (RIP) parameters
- interfaces ethernet <txt> ip rip authentication
- SDE
M10-Smart
M2
RS420
Authentication method
- interfaces ethernet <txt> ip rip authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> ip rip authentication message-digest <u32>
- SDE
M10-Smart
M2
RS420
MD5 authentication parameters
- Values
u32 – MD5 ID number (1-255)
- Instances
Multiple
- interfaces ethernet <txt> ip rip authentication message-digest <u32> encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – MD5 encrypted key
- interfaces ethernet <txt> ip rip authentication message-digest <u32> password <txt>
- SDE
M10-Smart
M2
RS420
MD5 key
- Values
txt – MD5 Key (1-16)
- interfaces ethernet <txt> ip rip authentication password <txt>
- SDE
M10-Smart
M2
RS420
Plain text password
- Values
txt – Plain text password (1-16)
- interfaces ethernet <txt> ip rip split-horizon
- SDE
M10-Smart
M2
RS420
Split horizon parameters
- interfaces ethernet <txt> ip rip split-horizon disable
- SDE
M10-Smart
M2
RS420
Disable split horizon on specified interface
- interfaces ethernet <txt> ip rip split-horizon poison-reverse
- SDE
M10-Smart
M2
RS420
Enable poison reverse for split-horizon
- interfaces ethernet <txt> ipv6
- SDE
M10-Smart
M2
RS420
IPv6 routing parameters
- interfaces ethernet <txt> ipv6 address
- SDE
M10-Smart
M2
RS420
IPv6 address auto-configuration modes
- interfaces ethernet <txt> ipv6 address autoconf
- SDE
M10-Smart
M2
RS420
Enable acquisition of IPv6 address using stateless autoconfig
- interfaces ethernet <txt> ipv6 address eui64 <ipv6net>
- SDE
M10-Smart
M2
RS420
Assign IPv6 address using EUI-64 based on MAC address
- Values
ipv6net – 64-bit IPv6 prefix to use with EUI-64 to make address
- Instances
Multiple
- interfaces ethernet <txt> ipv6 address prefix-from-provider <id>
- SDE
M10-Smart
M2
RS420
- Values
id – IPv6 from Learned Prefix
- Instances
Multiple
- interfaces ethernet <txt> ipv6 address prefix-from-provider <id> ifc-ID <ipv6net>
- SDE
M10-Smart
M2
RS420
Assign IPv6 address using Learned Prefixes
- Values
< – 64-bit IPv6 prefix (:h:h:h:h/64>)
- Instances
Multiple
- interfaces ethernet <txt> ipv6 dhcp-client-pd <id>
- SDE
M10-Smart
M2
RS420
- Values
id – Name of learned prefix from provider
- interfaces ethernet <txt> ipv6 disable-forwarding
- SDE
M10-Smart
M2
RS420
Disable IPv6 forwarding on this interface only
- interfaces ethernet <txt> ipv6 dup-addr-detect-transmits <u32>
- SDE
M10-Smart
M2
RS420
Number of NS messages to send while performing DAD
- Values
u32 – Number of NS messages to send while performing DAD (0-2147483647)
- interfaces ethernet <txt> ipv6 ospfv3
- SDE
M10-Smart
M2
RS420
IPv6 Open Shortest Path First (OSPFv3) parameters
- interfaces ethernet <txt> ipv6 ospfv3 cost <u32>
- SDE
M10-Smart
M2
RS420
Interface cost
- Values
u32 – OSPFv3 cost (1-65535)
- interfaces ethernet <txt> ipv6 ospfv3 dead-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval after which neighbor is declared dead
- Values
u32 – Neighbor dead interval in seconds (1-65535)
- interfaces ethernet <txt> ipv6 ospfv3 hello-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between hello packets
- Values
u32 – Interval between OSPFv3 hello packets in seconds (1-65535)
- interfaces ethernet <txt> ipv6 ospfv3 ifmtu <u32>
- SDE
M10-Smart
M2
RS420
Interface MTU
- Values
u32 – Interface MTU value (1-65535)
- interfaces ethernet <txt> ipv6 ospfv3 instance-id <u32>
- SDE
M10-Smart
M2
RS420
Instance-id
- Values
u32 – Instance Id (0-255)
- interfaces ethernet <txt> ipv6 ospfv3 mtu-ignore
- SDE
M10-Smart
M2
RS420
Disable Maximum Transmission Unit mismatch detection
- interfaces ethernet <txt> ipv6 ospfv3 passive
- SDE
M10-Smart
M2
RS420
Disable forming of adjacency
- interfaces ethernet <txt> ipv6 ospfv3 priority <u32>
- SDE
M10-Smart
M2
RS420
Router priority
- Values
u32 – Priority (0-255)
- interfaces ethernet <txt> ipv6 ospfv3 retransmit-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between retransmitting lost link state advertisements
- Values
u32 – Retransmit interval in seconds (3-65535)
- interfaces ethernet <txt> ipv6 ospfv3 transmit-delay <u32>
- SDE
M10-Smart
M2
RS420
Link state transmit delay
- Values
u32 – Link state transmit delay (1-65535)
- interfaces ethernet <txt> ipv6 ripng
- SDE
M10-Smart
M2
RS420
Routing Information Protocol (RIPng)
- interfaces ethernet <txt> ipv6 ripng split-horizon
- SDE
M10-Smart
M2
RS420
Split horizon parameters
- interfaces ethernet <txt> ipv6 ripng split-horizon disable
- SDE
M10-Smart
M2
RS420
Disable split horizon
- interfaces ethernet <txt> ipv6 ripng split-horizon poison-reverse
- SDE
M10-Smart
M2
RS420
Enable poison reverse for split-horizon
- interfaces ethernet <txt> ipv6 router-advert
- SDE
M10-Smart
M2
RS420
Configure parameters for sending Router Advertisements (RAs)
- interfaces ethernet <txt> ipv6 router-advert cur-hop-limit <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in the Current Hop Limit field in RAs
- Values
u32 – Value to place in the Current Hop Limit field in RAs (0-255)
- interfaces ethernet <txt> ipv6 router-advert default-lifetime <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in Router Lifetime field in RAs
- Values
u32 – Value in seconds to be placed in Router Lifetime field in RAs (4-9000)
u32 – This means “not a default router”, in Router Lifetime field (0)
- interfaces ethernet <txt> ipv6 router-advert default-preference <txt>
- SDE
M10-Smart
M2
RS420
Default router preference
- Values
low – Default router is low preference
medium – Default router is medium preference
high – Default router is high preference
- interfaces ethernet <txt> ipv6 router-advert link-mtu <u32>
- SDE
M10-Smart
M2
RS420
Value of link MTU to place in RAs
- Values
u32 – Do not send MTU options in RAs (0)
u32 – Value of link MTU to place in RAs (1280-2147483647)
- interfaces ethernet <txt> ipv6 router-advert managed-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Value for “managed address configuration” flag in RAs
- interfaces ethernet <txt> ipv6 router-advert max-interval <u32>
- SDE
M10-Smart
M2
RS420
Maximum interval between unsolicited multicast RAs
- Values
u32 – Maximum interval in seconds between unsolicited multicast RAs (4-1800)
- interfaces ethernet <txt> ipv6 router-advert min-interval <u32>
- SDE
M10-Smart
M2
RS420
Minimum interval between unsolicited multicast RAs
- Values
u32 – Minimum interval in seconds between unsolicited multicast RAs (3-1350)
- interfaces ethernet <txt> ipv6 router-advert name-server <ipv6>
- SDE
M10-Smart
M2
RS420
- Values
ipv6 – IPv6 address of a Recursive DNS Server
- Instances
Multiple
- interfaces ethernet <txt> ipv6 router-advert other-config-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Value to be placed in the “other configuration” flag in RAs
- interfaces ethernet <txt> ipv6 router-advert prefix <ipv6net>
- SDE
M10-Smart
M2
RS420
IPv6 prefix to be advertised in Router Advertisements (RAs)
- Values
ipv6net – IPv6 prefix to be advertized in Router Advertisements (RAs)
- Instances
Multiple
- interfaces ethernet <txt> ipv6 router-advert prefix <ipv6net> autonomous-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Whether prefix can be used for address auto-configuration
- interfaces ethernet <txt> ipv6 router-advert prefix <ipv6net> on-link-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Flag that prefix can be used for on-link determination
- interfaces ethernet <txt> ipv6 router-advert prefix <ipv6net> preferred-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain preferred
- Values
u32 – Time in seconds that the prefix will remain preferred (0-2147483647)
infinity – Prefix will remain preferred forever
- interfaces ethernet <txt> ipv6 router-advert prefix <ipv6net> valid-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain valid
- Values
u32 – Time in seconds that the prefix will remain valid (0-2147483647)
infinity – Prefix will remain valid forever
- interfaces ethernet <txt> ipv6 router-advert reachable-time <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in “Reachable Time” field in RAs
- Values
u32 – Reachable Time value in RAs (in milliseconds) (1-3600000)
u32 – Reachable Time 0 (i.e., unspecified by this router) (0)
- interfaces ethernet <txt> ipv6 router-advert retrans-timer <u32>
- SDE
M10-Smart
M2
RS420
Value to place in “Retrans Timer” field in RAs.
- Values
u32 – Value in milliseconds to place in “Retrans Timer” field in RAs (0-2147483647)
- interfaces ethernet <txt> ipv6 router-advert send-advert <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Enable/disable sending RAs
- interfaces ethernet <txt> ipv6 router-advert used-prefixes
- SDE
M10-Smart
M2
RS420
Delegate prefixes used on the interface
- interfaces ethernet <txt> ipv6 router-advert used-prefixes autonomous-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Whether prefix can be used for address auto-configuration
- interfaces ethernet <txt> ipv6 router-advert used-prefixes on-link-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Flag that prefix can be used for on-link determination
- interfaces ethernet <txt> ipv6 router-advert used-prefixes preferred-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain preferred
- Values
u32 – Time in seconds that the prefix will remain preferred (0-2147483647)
infinity – Prefix will remain preferred forever
- interfaces ethernet <txt> ipv6 router-advert used-prefixes valid-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain valid
- Values
u32 – Time in seconds that the prefix will remain valid (0-2147483647)
infinity – Prefix will remain valid forever
- interfaces ethernet <txt> mac <macaddr>
- SDE
M10-Smart
M2
RS420
- Values
macaddr – Media Access Control (MAC) address
- interfaces ethernet <txt> mtu <u32>
- SDE
M10-Smart
M2
RS420
Maximum Transmission Unit (MTU)
- Values
u32 – Maximum Transmission Unit (MTU) (68-9000)
- interfaces ethernet <txt> offload-options
- SDE
M10-Smart
M2
RS420
Configurable offload options
- interfaces ethernet <txt> offload-options generic-receive <txt>
- SDE
M10-Smart
M2
RS420
Configure generic-receive option
- Values
on – Enable generic-receive
off – Disable generic-receive
- interfaces ethernet <txt> offload-options generic-segmentation <txt>
- SDE
M10-Smart
M2
RS420
Configure generic-segmentation option
- Values
on – Enable generic-segmentation
off – Disable generic-segmentation
- interfaces ethernet <txt> offload-options scatter-gather <txt>
- SDE
M10-Smart
M2
RS420
Configure scatter-gather option
- Values
on – Enable scatter-gather
off – Disable scatter-gather
- interfaces ethernet <txt> offload-options tcp-segmentation <txt>
- SDE
M10-Smart
M2
RS420
Configure tcp-segmentation option
- Values
on – Enable tcp-segmentation
off – Disable tcp-segmentation
- interfaces ethernet <txt> offload-options udp-fragmentation <txt>
- SDE
M10-Smart
M2
RS420
Configure udp-fragmentation option
- Values
on – Enable udp-fragmentation
off – Disable udp-fragmentation
- interfaces ethernet <txt> ring-size
- SDE
M10-Smart
M2
RS420
Configure size of queue
- interfaces ethernet <txt> ring-size rx <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – Choose ring-size for the reception queue
- interfaces ethernet <txt> ring-size tx <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – Choose ring-size for the transmission queue
- interfaces ethernet <txt> rps
- SDE
Enable Receive Packet Steering
- interfaces ethernet <txt> speed <txt>
- SDE
M10-Smart
M2
RS420
Link speed
- Values
auto – Auto negotiation
10 – 10 Mbit/sec
100 – 100 Mbit/sec
1000 – 1 Gbit/sec
2500 – 2.5 Gbit/sec
10000 – 10 Gbit/sec
- interfaces ethernet <txt> tcp-mss <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – Change tcp-mss value
- interfaces ethernet <txt> traffic
- SDE
M10-Smart
M2
RS420
Traffic processing options
- interfaces ethernet <txt> traffic control
- SDE
M10-Smart
M2
RS420
Traffic control for interface
- interfaces ethernet <txt> traffic control in <id>
- SDE
M10-Smart
M2
RS420
Ingress traffic control for interface
- Reference
- interfaces ethernet <txt> traffic control out <id>
- SDE
M10-Smart
M2
RS420
Egress traffic control for interface
- Reference
- interfaces ethernet <txt> traffic nat
- SDE
M10-Smart
M2
RS420
Network Address Translation (NAT) parameters
- interfaces ethernet <txt> traffic nat destination
- SDE
M10-Smart
M2
RS420
Destination NAT settings
- interfaces ethernet <txt> traffic nat destination rule <u32>
- SDE
M10-Smart
M2
RS420
Rule number for NAT
- Values
u32 – Number for this NAT rule (1-9999)
- Instances
Multiple
- interfaces ethernet <txt> traffic nat destination rule <u32> address <ipv4|ipv4net|ipv4range|id>
- SDE
M10-Smart
M2
RS420
IP address, subnet, range or redirect
- Values
ipv4 – NAT to the specified IP address
ipv4net – NAT to the specified network address
ipv4range – NAT to the specified IP range
redirect – NAT to the interface address
- interfaces ethernet <txt> traffic nat destination rule <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Rule description
- interfaces ethernet <txt> traffic nat destination rule <u32> log
- SDE
M10-Smart
M2
RS420
Log packets to which this rule has been applied
- interfaces ethernet <txt> traffic nat destination rule <u32> log level <txt>
- SDE
M10-Smart
M2
RS420
Loggin level
- Values
emerg – Emergency messages
alert – Urgent messages
crit – Critical messages
err – Error messages
warn – Warning messages
notice – Messages for further investigation
info – Informational messages
debug – Debug messages
- interfaces ethernet <txt> traffic nat destination rule <u32> log prefix <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Log message prefix text, up to 29 characters
- interfaces ethernet <txt> traffic nat destination rule <u32> network <ipv4net>
- SDE
M10-Smart
M2
RS420
IP prefix to use in translation (host part is kept)
- Values
ipv4net – NAT to the specified network address, host part of the address will remain unchanged
- interfaces ethernet <txt> traffic nat destination rule <u32> port <u32|id>
- SDE
M10-Smart
M2
RS420
NAT port
- Values
u32 – Port to use in PAT (1-65535)
range – Port range (pool, for example, 1001-1005)
- interfaces ethernet <txt> traffic nat destination rule <u32> protocol <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – NAT transport protocol
- interfaces ethernet <txt> traffic nat destination rule <u32> selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> traffic nat source
- SDE
M10-Smart
M2
RS420
Source NAT settings
- interfaces ethernet <txt> traffic nat source rule <u32>
- SDE
M10-Smart
M2
RS420
Rule number for NAT
- Values
u32 – Number for this NAT rule (1-9999)
- Instances
Multiple
- interfaces ethernet <txt> traffic nat source rule <u32> address <ipv4|ipv4net|ipv4range|id>
- SDE
M10-Smart
M2
RS420
IP address, subnet, range or masquerade
- Values
ipv4 – NAT to the specified IP address
ipv4net – NAT to the specified network address
ipv4range – NAT to the specified IP range
masquerade – NAT to the interface address
- interfaces ethernet <txt> traffic nat source rule <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Rule description
- interfaces ethernet <txt> traffic nat source rule <u32> log
- SDE
M10-Smart
M2
RS420
Log packets to which this rule has been applied
- interfaces ethernet <txt> traffic nat source rule <u32> log level <txt>
- SDE
M10-Smart
M2
RS420
Loggin level
- Values
emerg – Emergency messages
alert – Urgent messages
crit – Critical messages
err – Error messages
warn – Warning messages
notice – Messages for further investigation
info – Informational messages
debug – Debug messages
- interfaces ethernet <txt> traffic nat source rule <u32> log prefix <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Log message prefix text, up to 29 characters
- interfaces ethernet <txt> traffic nat source rule <u32> network <ipv4net>
- SDE
M10-Smart
M2
RS420
IP prefix to use in translation (host part is kept)
- Values
ipv4net – NAT to the specified network address, host part of the address will remain unchanged
- interfaces ethernet <txt> traffic nat source rule <u32> port <u32|id>
- SDE
M10-Smart
M2
RS420
NAT port
- Values
u32 – Port to use in PAT (1-65535)
range – Port range (pool, for example, 1001-1005)
- interfaces ethernet <txt> traffic nat source rule <u32> protocol <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – NAT transport protocol
- interfaces ethernet <txt> traffic nat source rule <u32> selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> traffic policy
- SDE
M10-Smart
M2
RS420
Traffic policy rulesets for interface
- interfaces ethernet <txt> traffic policy in <txt>
- SDE
M10-Smart
M2
RS420
Input traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> traffic policy in <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed before NAT
high – Second policy executed before NAT
low – First policy executed after NAT
very-low – Second policy executed after NAT
- interfaces ethernet <txt> traffic policy link <txt>
- SDE
M10-Smart
M2
RS420
Link layer traffic policy ruleset for interface
- Reference
- interfaces ethernet <txt> traffic policy local-in <txt>
- SDE
M10-Smart
M2
RS420
Local input traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> traffic policy local-in <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed
high – Second policy executed
low – Third policy executed
very-low – Fourth policy executed
- interfaces ethernet <txt> traffic policy local-out <txt>
- SDE
M10-Smart
M2
RS420
Local output traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> traffic policy local-out <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed
high – Second policy executed
low – Third policy executed
very-low – Fourth policy executed
- interfaces ethernet <txt> traffic policy out <txt>
- SDE
M10-Smart
M2
RS420
Output traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> traffic policy out <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed before NAT
high – Second policy executed before NAT
low – First policy executed after NAT
very-low – Second policy executed after NAT
- interfaces ethernet <txt> traffic zone <txt>
- SDE
M10-Smart
M2
RS420
Traffic zone associated with this interface
- Reference
- interfaces ethernet <txt> vif <u32>
- SDE
M10-Smart
M2
RS420
Virtual Local Area Network (VLAN) ID
- Values
u32 – VLAN ID (1-4094)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> address <ipv4cidr|ipv6cidr|id>
- SDE
M10-Smart
M2
RS420
IP address
- Values
ipv6cidr – IPv6 address and prefix length
dhcpv6 – Dynamic Host Configuration Protocol for IPv6
ipv4cidr – IPv4 address and prefix length
dhcp – Dynamic Host Configuration Protocol
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> alarm
- SDE
M10-Smart
M2
RS420
Enable or disable alarm according the link state
- interfaces ethernet <txt> vif <u32> alarm down <txt>
- SDE
M10-Smart
M2
RS420
Alarm to be enabled if the link is down
- Reference
- interfaces ethernet <txt> vif <u32> description <id>
- SDE
M10-Smart
M2
RS420
Description
- Values
id – “Interface description is too long (limit 256 characters)” (1-256)
- interfaces ethernet <txt> vif <u32> dhcp
- SDE
M10-Smart
M2
RS420
Dynamic Host Configuration Protocol configuration
- interfaces ethernet <txt> vif <u32> dhcp client
- SDE
M10-Smart
M2
RS420
DHCP client configuration
- interfaces ethernet <txt> vif <u32> dhcp client fallback <ipv4cidr|ipv6cidr>
- SDE
M10-Smart
M2
RS420
- Values
ipv4cidr – Fallback IP address
ipv6cidr – Fallback IP address
- interfaces ethernet <txt> vif <u32> dhcp client rfc3442-routes
- SDE
M10-Smart
M2
RS420
Install RFC3442 routes received from DHCP server
- interfaces ethernet <txt> vif <u32> dhcp client send
- SDE
M10-Smart
M2
RS420
Send user-defined options to the DHCP server
- interfaces ethernet <txt> vif <u32> dhcp client send dhcp-client-identifier
- SDE
M10-Smart
M2
RS420
Include the ‘dhcp-client-identifier’ option
- Instances
Unique
- interfaces ethernet <txt> vif <u32> dhcp client send dhcp-client-identifier base-mac
- SDE
M10-Smart
M2
RS420
Use device base mac as identifier
- interfaces ethernet <txt> vif <u32> dhcp client send dhcp-client-identifier serial-number
- SDE
M10-Smart
M2
RS420
Use device serial number as identifier
- interfaces ethernet <txt> vif <u32> dhcp client send dhcp-client-identifier string <id>
- SDE
M10-Smart
M2
RS420
Use a string as identifier
- Values
id – Identifier string (1-255)
- interfaces ethernet <txt> vif <u32> dhcp client send vendor-class-identifier
- SDE
M10-Smart
M2
RS420
Include the ‘vendor-class-identifier’ option
- Instances
Unique
- interfaces ethernet <txt> vif <u32> dhcp client send vendor-class-identifier string <id>
- SDE
M10-Smart
M2
RS420
Use a string as identifier
- Values
id – Identifier string (1-255)
- interfaces ethernet <txt> vif <u32> dhcpv6
- SDE
M10-Smart
M2
RS420
Dynamic Host Configuration Protocol v6 configuration
- interfaces ethernet <txt> vif <u32> dhcpv6 client
- SDE
M10-Smart
M2
RS420
DHCPv6 client configuration
- interfaces ethernet <txt> vif <u32> dhcpv6 client parameters-only
- SDE
M10-Smart
M2
RS420
Acquire only config parameters, not address
- interfaces ethernet <txt> vif <u32> dhcpv6 client send
- SDE
M10-Smart
M2
RS420
Send user-defined options to the DHCPv6 server
- interfaces ethernet <txt> vif <u32> dhcpv6 client send duid <id>
- SDE
M10-Smart
M2
RS420
- Values
id – DHCPv6 DUID to be sent by dhcpv6 client
- interfaces ethernet <txt> vif <u32> dhcpv6 client temporary
- SDE
M10-Smart
M2
RS420
IPv6 “temporary” address
- interfaces ethernet <txt> vif <u32> disable
- SDE
M10-Smart
M2
RS420
Disable interface
- interfaces ethernet <txt> vif <u32> disable advisor <txt>
- SDE
M10-Smart
M2
RS420
Advisor to enable or disable the interface
- Reference
- interfaces ethernet <txt> vif <u32> disable-offload
- SDE
M10-Smart
M2
RS420
Disable offload engine in this interface
- interfaces ethernet <txt> vif <u32> ethertype <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Set VLAN protocol
- interfaces ethernet <txt> vif <u32> flow
- SDE
M10-Smart
M2
RS420
Active netflow on interface
- interfaces ethernet <txt> vif <u32> flow egress
- SDE
M10-Smart
M2
RS420
Active output traffic
- interfaces ethernet <txt> vif <u32> flow egress selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> vif <u32> flow ingress
- SDE
M10-Smart
M2
RS420
Active input traffic
- interfaces ethernet <txt> vif <u32> flow ingress selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> vif <u32> ip
- SDE
M10-Smart
M2
RS420
IPv4 routing parameters
- interfaces ethernet <txt> vif <u32> ip arp
- SDE
M10-Smart
M2
RS420
ARP options
- interfaces ethernet <txt> vif <u32> ip arp ignore
- SDE
M10-Smart
M2
RS420
Enable arp-ignore on this interface
- interfaces ethernet <txt> vif <u32> ip arp no-filter
- SDE
M10-Smart
M2
RS420
Disable arp-filter on this interface
- interfaces ethernet <txt> vif <u32> ip arp no-notify
- SDE
M10-Smart
M2
RS420
Disable arp_notify on this interface
- interfaces ethernet <txt> vif <u32> ip arp proxy
- SDE
M10-Smart
M2
RS420
Enable proxy-arp on this interface
- interfaces ethernet <txt> vif <u32> ip arp pvlan-proxy
- SDE
M10-Smart
M2
RS420
Enable private VLAN proxy ARP on this interface
- interfaces ethernet <txt> vif <u32> ip arp static <ipv4>
- SDE
M10-Smart
M2
RS420
Static ARP translation
- Values
ipv4 – IPv4 address to add in ARP table
- Instances
Multiple
- Required
- interfaces ethernet <txt> vif <u32> ip arp static <ipv4> mac <macaddr>
- SDE
M10-Smart
M2
RS420
- Values
macaddr – MAC address
- interfaces ethernet <txt> vif <u32> ip arp timeout <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – ARP cache entry timeout in seconds
- interfaces ethernet <txt> vif <u32> ip igmp
- SDE
M10-Smart
M2
RS420
Internet Group Management Protocol (IGMP) parameters
- interfaces ethernet <txt> vif <u32> ip igmp join <ipv4>
- SDE
M10-Smart
M2
RS420
Join multicast group
- Values
ipv4 – Join multicast group on this interface
- interfaces ethernet <txt> vif <u32> ip igmp last-member-query-count <u32>
- SDE
M10-Smart
M2
RS420
IGMP last member query count
- Values
u32 – IGMP last member query count (1-255)
- interfaces ethernet <txt> vif <u32> ip igmp last-member-query-interval <u32>
- SDE
M10-Smart
M2
RS420
IGMP last member query interval
- Values
u32 – IGMP last member query interval in deciseconds (1-65535)
- interfaces ethernet <txt> vif <u32> ip igmp query-interval <u32>
- SDE
M10-Smart
M2
RS420
IGMP query interval
- Values
u32 – IGMP query interval in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> ip igmp query-max-response-time <u32>
- SDE
M10-Smart
M2
RS420
IGMP query response timeout value
- Values
u32 – IGMP query response timeout value in deciseconds (1-65535)
- interfaces ethernet <txt> vif <u32> ip igmp version <u32>
- SDE
M10-Smart
M2
RS420
IGMP version
- Values
u32 – IGMP version used on this interface (2-3)
- interfaces ethernet <txt> vif <u32> ip multicast
- SDE
M10-Smart
M2
RS420
Multicast parameters
- interfaces ethernet <txt> vif <u32> ip multicast boundary-list <txt>
- SDE
M10-Smart
M2
RS420
Prefix-list to control for which groups to accept or ignore received PIM join or IGMP report messages
- Reference
- interfaces ethernet <txt> vif <u32> ip ospf
- SDE
M10-Smart
M2
RS420
Open Shortest Path First (OSPF) parameters
- interfaces ethernet <txt> vif <u32> ip ospf authentication
- SDE
M10-Smart
M2
RS420
OSPF interface authentication
- interfaces ethernet <txt> vif <u32> ip ospf authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> vif <u32> ip ospf authentication message-digest <id>
- SDE
M10-Smart
M2
RS420
MD5 authentication parameters
- Values
id – MD5 ID number (1-255)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> ip ospf authentication message-digest <id> encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – MD5 encrypted key
- interfaces ethernet <txt> vif <u32> ip ospf authentication message-digest <id> password <txt>
- SDE
M10-Smart
M2
RS420
MD5 key
- Values
txt – MD5 Key (1-16)
- interfaces ethernet <txt> vif <u32> ip ospf authentication password <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Plain text password
- interfaces ethernet <txt> vif <u32> ip ospf bandwidth <u32>
- SDE
M10-Smart
M2
RS420
Bandwidth of interface (kilobits/sec)
- Values
u32 – Bandwidth in kilobits/sec (for calculating OSPF cost) (1-10000000)
- interfaces ethernet <txt> vif <u32> ip ospf cost <u32>
- SDE
M10-Smart
M2
RS420
Interface cost
- Values
u32 – OSPF interface cost (1-65535)
- interfaces ethernet <txt> vif <u32> ip ospf dead-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval after which neighbor is dead
- Values
u32 – OSPF dead interval in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> ip ospf hello-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between hello packets
- Values
u32 – Interval between OSPF hello packets in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> ip ospf mtu-ignore
- SDE
M10-Smart
M2
RS420
Disable Maximum Transmission Unit (MTU) mismatch detection
- interfaces ethernet <txt> vif <u32> ip ospf network <id>
- SDE
M10-Smart
M2
RS420
Network type
- Values
broadcast – Broadcast network type
non-broadcast – Non-broadcast network type
point-to-multipoint – Point-to-multipoint network type
point-to-point – Point-to-point network type
- interfaces ethernet <txt> vif <u32> ip ospf priority <u32>
- SDE
M10-Smart
M2
RS420
Router priority
- Values
u32 – Priority (0-255)
- interfaces ethernet <txt> vif <u32> ip ospf retransmit-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between retransmitting lost link state advertisements
- Values
u32 – Retransmit interval in seconds (3-65535)
- interfaces ethernet <txt> vif <u32> ip ospf transmit-delay <u32>
- SDE
M10-Smart
M2
RS420
Link state transmit delay
- Values
u32 – Transmit delay in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> ip pim
- SDE
M10-Smart
M2
RS420
Protocol Independent Multicast (PIM) parameters
- interfaces ethernet <txt> vif <u32> ip pim disable-bsm
- SDE
M10-Smart
M2
RS420
Disable sending and receiving bootstrap messages
- interfaces ethernet <txt> vif <u32> ip pim disable-unicast-bsm
- SDE
M10-Smart
M2
RS420
Disable sending and receiving unicast bootstrap messages
- interfaces ethernet <txt> vif <u32> ip pim drpriority <u32>
- SDE
M10-Smart
M2
RS420
PIM Designated Router (DR) priority
- Values
u32 – PIM DR priority for the interface (1-4294967295)
- interfaces ethernet <txt> vif <u32> ip pim hello <u32>
- SDE
M10-Smart
M2
RS420
PIM hello interval
- Values
u32 – PIM hello interval in seconds (1-255)
- interfaces ethernet <txt> vif <u32> ip pim passive
- SDE
M10-Smart
M2
RS420
Disable sending and receiving all PIM control messages (such as: ASSERT, BSM, HELLO, JOIN, PRUNE, REGISTER, REGISTER-STOP)
- interfaces ethernet <txt> vif <u32> ip reverse-path-filter <id>
- SDE
M10-Smart
M2
RS420
Policy for source validation by reversed path, as specified in RFC3704
- Values
strict – Enable Strict Reverse Path Forwarding as defined in RFC3704
loose – Enable Loose Reverse Path Forwarding as defined in RFC3704
disable – No source validation
- interfaces ethernet <txt> vif <u32> ip rip
- SDE
M10-Smart
M2
RS420
Routing Information Protocol (RIP) parameters
- interfaces ethernet <txt> vif <u32> ip rip authentication
- SDE
M10-Smart
M2
RS420
Authentication method
- interfaces ethernet <txt> vif <u32> ip rip authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> vif <u32> ip rip authentication message-digest <u32>
- SDE
M10-Smart
M2
RS420
MD5 authentication parameters
- Values
u32 – MD5 ID number (1-255)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> ip rip authentication message-digest <u32> encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – MD5 encrypted key
- interfaces ethernet <txt> vif <u32> ip rip authentication message-digest <u32> password <txt>
- SDE
M10-Smart
M2
RS420
MD5 key
- Values
txt – MD5 Key (1-16)
- interfaces ethernet <txt> vif <u32> ip rip authentication password <txt>
- SDE
M10-Smart
M2
RS420
Plain text password
- Values
txt – Plain text password (1-16)
- interfaces ethernet <txt> vif <u32> ip rip split-horizon
- SDE
M10-Smart
M2
RS420
Split horizon parameters
- interfaces ethernet <txt> vif <u32> ip rip split-horizon disable
- SDE
M10-Smart
M2
RS420
Disable split horizon on specified interface
- interfaces ethernet <txt> vif <u32> ip rip split-horizon poison-reverse
- SDE
M10-Smart
M2
RS420
Enable poison reverse for split-horizon
- interfaces ethernet <txt> vif <u32> ipv6
- SDE
M10-Smart
M2
RS420
IPv6 routing parameters
- interfaces ethernet <txt> vif <u32> ipv6 address
- SDE
M10-Smart
M2
RS420
IPv6 address auto-configuration modes
- interfaces ethernet <txt> vif <u32> ipv6 address autoconf
- SDE
M10-Smart
M2
RS420
Enable acquisition of IPv6 address using stateless autoconfig
- interfaces ethernet <txt> vif <u32> ipv6 address eui64 <ipv6net>
- SDE
M10-Smart
M2
RS420
Assign IPv6 address using EUI-64 based on MAC address
- Values
ipv6net – 64-bit IPv6 prefix to use with EUI-64 to make address
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> ipv6 address prefix-from-provider <id>
- SDE
M10-Smart
M2
RS420
- Values
id – IPv6 from Learned Prefix
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> ipv6 address prefix-from-provider <id> ifc-ID <ipv6net>
- SDE
M10-Smart
M2
RS420
Assign IPv6 address using Learned Prefixes
- Values
< – 64-bit IPv6 prefix (:h:h:h:h/64>)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> ipv6 dhcp-client-pd <id>
- SDE
M10-Smart
M2
RS420
- Values
id – Name of learned prefix from provider
- interfaces ethernet <txt> vif <u32> ipv6 disable-forwarding
- SDE
M10-Smart
M2
RS420
Disable IPv6 forwarding on this interface only
- interfaces ethernet <txt> vif <u32> ipv6 dup-addr-detect-transmits <u32>
- SDE
M10-Smart
M2
RS420
Number of NS messages to send while performing DAD
- Values
u32 – Number of NS messages to send while performing DAD (0-2147483647)
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3
- SDE
M10-Smart
M2
RS420
IPv6 Open Shortest Path First (OSPFv3) parameters
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 cost <u32>
- SDE
M10-Smart
M2
RS420
Interface cost
- Values
u32 – OSPFv3 cost (1-65535)
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 dead-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval after which neighbor is declared dead
- Values
u32 – Neighbor dead interval in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 hello-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between hello packets
- Values
u32 – Interval between OSPFv3 hello packets in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 ifmtu <u32>
- SDE
M10-Smart
M2
RS420
Interface MTU
- Values
u32 – Interface MTU value (1-65535)
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 instance-id <u32>
- SDE
M10-Smart
M2
RS420
Instance-id
- Values
u32 – Instance Id (0-255)
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 mtu-ignore
- SDE
M10-Smart
M2
RS420
Disable Maximum Transmission Unit mismatch detection
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 passive
- SDE
M10-Smart
M2
RS420
Disable forming of adjacency
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 priority <u32>
- SDE
M10-Smart
M2
RS420
Router priority
- Values
u32 – Priority (0-255)
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 retransmit-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between retransmitting lost link state advertisements
- Values
u32 – Retransmit interval in seconds (3-65535)
- interfaces ethernet <txt> vif <u32> ipv6 ospfv3 transmit-delay <u32>
- SDE
M10-Smart
M2
RS420
Link state transmit delay
- Values
u32 – Link state transmit delay (1-65535)
- interfaces ethernet <txt> vif <u32> ipv6 ripng
- SDE
M10-Smart
M2
RS420
Routing Information Protocol (RIPng)
- interfaces ethernet <txt> vif <u32> ipv6 ripng split-horizon
- SDE
M10-Smart
M2
RS420
Split horizon parameters
- interfaces ethernet <txt> vif <u32> ipv6 ripng split-horizon disable
- SDE
M10-Smart
M2
RS420
Disable split horizon
- interfaces ethernet <txt> vif <u32> ipv6 ripng split-horizon poison-reverse
- SDE
M10-Smart
M2
RS420
Enable poison reverse for split-horizon
- interfaces ethernet <txt> vif <u32> ipv6 router-advert
- SDE
M10-Smart
M2
RS420
Configure parameters for sending Router Advertisements (RAs)
- interfaces ethernet <txt> vif <u32> ipv6 router-advert cur-hop-limit <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in the Current Hop Limit field in RAs
- Values
u32 – Value to place in the Current Hop Limit field in RAs (0-255)
- interfaces ethernet <txt> vif <u32> ipv6 router-advert default-lifetime <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in Router Lifetime field in RAs
- Values
u32 – Value in seconds to be placed in Router Lifetime field in RAs (4-9000)
u32 – This means “not a default router”, in Router Lifetime field (0)
- interfaces ethernet <txt> vif <u32> ipv6 router-advert default-preference <txt>
- SDE
M10-Smart
M2
RS420
Default router preference
- Values
low – Default router is low preference
medium – Default router is medium preference
high – Default router is high preference
- interfaces ethernet <txt> vif <u32> ipv6 router-advert link-mtu <u32>
- SDE
M10-Smart
M2
RS420
Value of link MTU to place in RAs
- Values
u32 – Do not send MTU options in RAs (0)
u32 – Value of link MTU to place in RAs (1280-2147483647)
- interfaces ethernet <txt> vif <u32> ipv6 router-advert managed-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Value for “managed address configuration” flag in RAs
- interfaces ethernet <txt> vif <u32> ipv6 router-advert max-interval <u32>
- SDE
M10-Smart
M2
RS420
Maximum interval between unsolicited multicast RAs
- Values
u32 – Maximum interval in seconds between unsolicited multicast RAs (4-1800)
- interfaces ethernet <txt> vif <u32> ipv6 router-advert min-interval <u32>
- SDE
M10-Smart
M2
RS420
Minimum interval between unsolicited multicast RAs
- Values
u32 – Minimum interval in seconds between unsolicited multicast RAs (3-1350)
- interfaces ethernet <txt> vif <u32> ipv6 router-advert name-server <ipv6>
- SDE
M10-Smart
M2
RS420
- Values
ipv6 – IPv6 address of a Recursive DNS Server
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> ipv6 router-advert other-config-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Value to be placed in the “other configuration” flag in RAs
- interfaces ethernet <txt> vif <u32> ipv6 router-advert prefix <ipv6net>
- SDE
M10-Smart
M2
RS420
IPv6 prefix to be advertised in Router Advertisements (RAs)
- Values
ipv6net – IPv6 prefix to be advertized in Router Advertisements (RAs)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> ipv6 router-advert prefix <ipv6net> autonomous-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Whether prefix can be used for address auto-configuration
- interfaces ethernet <txt> vif <u32> ipv6 router-advert prefix <ipv6net> on-link-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Flag that prefix can be used for on-link determination
- interfaces ethernet <txt> vif <u32> ipv6 router-advert prefix <ipv6net> preferred-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain preferred
- Values
u32 – Time in seconds that the prefix will remain preferred (0-2147483647)
infinity – Prefix will remain preferred forever
- interfaces ethernet <txt> vif <u32> ipv6 router-advert prefix <ipv6net> valid-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain valid
- Values
u32 – Time in seconds that the prefix will remain valid (0-2147483647)
infinity – Prefix will remain valid forever
- interfaces ethernet <txt> vif <u32> ipv6 router-advert reachable-time <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in “Reachable Time” field in RAs
- Values
u32 – Reachable Time value in RAs (in milliseconds) (1-3600000)
u32 – Reachable Time 0 (i.e., unspecified by this router) (0)
- interfaces ethernet <txt> vif <u32> ipv6 router-advert retrans-timer <u32>
- SDE
M10-Smart
M2
RS420
Value to place in “Retrans Timer” field in RAs.
- Values
u32 – Value in milliseconds to place in “Retrans Timer” field in RAs (0-2147483647)
- interfaces ethernet <txt> vif <u32> ipv6 router-advert send-advert <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Enable/disable sending RAs
- interfaces ethernet <txt> vif <u32> ipv6 router-advert used-prefixes
- SDE
M10-Smart
M2
RS420
Delegate prefixes used on the interface
- interfaces ethernet <txt> vif <u32> ipv6 router-advert used-prefixes autonomous-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Whether prefix can be used for address auto-configuration
- interfaces ethernet <txt> vif <u32> ipv6 router-advert used-prefixes on-link-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Flag that prefix can be used for on-link determination
- interfaces ethernet <txt> vif <u32> ipv6 router-advert used-prefixes preferred-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain preferred
- Values
u32 – Time in seconds that the prefix will remain preferred (0-2147483647)
infinity – Prefix will remain preferred forever
- interfaces ethernet <txt> vif <u32> ipv6 router-advert used-prefixes valid-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain valid
- Values
u32 – Time in seconds that the prefix will remain valid (0-2147483647)
infinity – Prefix will remain valid forever
- interfaces ethernet <txt> vif <u32> mac <macaddr>
- SDE
M10-Smart
M2
RS420
- Values
macaddr – Media Access Control (MAC) address
- interfaces ethernet <txt> vif <u32> mtu <u32>
- SDE
M10-Smart
M2
RS420
Maximum Transmission Unit (MTU)
- Values
u32 – Maximum Transmission Unit (MTU) (68-9000)
- interfaces ethernet <txt> vif <u32> tcp-mss <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – Change tcp-mss value
- interfaces ethernet <txt> vif <u32> traffic
- SDE
M10-Smart
M2
RS420
Traffic processing options
- interfaces ethernet <txt> vif <u32> traffic control
- SDE
M10-Smart
M2
RS420
Traffic control for interface
- interfaces ethernet <txt> vif <u32> traffic control in <id>
- SDE
M10-Smart
M2
RS420
Ingress traffic control for interface
- Reference
- interfaces ethernet <txt> vif <u32> traffic control out <id>
- SDE
M10-Smart
M2
RS420
Egress traffic control for interface
- Reference
- interfaces ethernet <txt> vif <u32> traffic nat
- SDE
M10-Smart
M2
RS420
Network Address Translation (NAT) parameters
- interfaces ethernet <txt> vif <u32> traffic nat destination
- SDE
M10-Smart
M2
RS420
Destination NAT settings
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32>
- SDE
M10-Smart
M2
RS420
Rule number for NAT
- Values
u32 – Number for this NAT rule (1-9999)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> address <ipv4|ipv4net|ipv4range|id>
- SDE
M10-Smart
M2
RS420
IP address, subnet, range or redirect
- Values
ipv4 – NAT to the specified IP address
ipv4net – NAT to the specified network address
ipv4range – NAT to the specified IP range
redirect – NAT to the interface address
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Rule description
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> log
- SDE
M10-Smart
M2
RS420
Log packets to which this rule has been applied
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> log level <txt>
- SDE
M10-Smart
M2
RS420
Loggin level
- Values
emerg – Emergency messages
alert – Urgent messages
crit – Critical messages
err – Error messages
warn – Warning messages
notice – Messages for further investigation
info – Informational messages
debug – Debug messages
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> log prefix <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Log message prefix text, up to 29 characters
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> network <ipv4net>
- SDE
M10-Smart
M2
RS420
IP prefix to use in translation (host part is kept)
- Values
ipv4net – NAT to the specified network address, host part of the address will remain unchanged
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> port <u32|id>
- SDE
M10-Smart
M2
RS420
NAT port
- Values
u32 – Port to use in PAT (1-65535)
range – Port range (pool, for example, 1001-1005)
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> protocol <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – NAT transport protocol
- interfaces ethernet <txt> vif <u32> traffic nat destination rule <u32> selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> vif <u32> traffic nat source
- SDE
M10-Smart
M2
RS420
Source NAT settings
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32>
- SDE
M10-Smart
M2
RS420
Rule number for NAT
- Values
u32 – Number for this NAT rule (1-9999)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> address <ipv4|ipv4net|ipv4range|id>
- SDE
M10-Smart
M2
RS420
IP address, subnet, range or masquerade
- Values
ipv4 – NAT to the specified IP address
ipv4net – NAT to the specified network address
ipv4range – NAT to the specified IP range
masquerade – NAT to the interface address
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Rule description
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> log
- SDE
M10-Smart
M2
RS420
Log packets to which this rule has been applied
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> log level <txt>
- SDE
M10-Smart
M2
RS420
Loggin level
- Values
emerg – Emergency messages
alert – Urgent messages
crit – Critical messages
err – Error messages
warn – Warning messages
notice – Messages for further investigation
info – Informational messages
debug – Debug messages
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> log prefix <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Log message prefix text, up to 29 characters
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> network <ipv4net>
- SDE
M10-Smart
M2
RS420
IP prefix to use in translation (host part is kept)
- Values
ipv4net – NAT to the specified network address, host part of the address will remain unchanged
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> port <u32|id>
- SDE
M10-Smart
M2
RS420
NAT port
- Values
u32 – Port to use in PAT (1-65535)
range – Port range (pool, for example, 1001-1005)
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> protocol <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – NAT transport protocol
- interfaces ethernet <txt> vif <u32> traffic nat source rule <u32> selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> vif <u32> traffic policy
- SDE
M10-Smart
M2
RS420
Traffic policy rulesets for interface
- interfaces ethernet <txt> vif <u32> traffic policy in <txt>
- SDE
M10-Smart
M2
RS420
Input traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> traffic policy in <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed before NAT
high – Second policy executed before NAT
low – First policy executed after NAT
very-low – Second policy executed after NAT
- interfaces ethernet <txt> vif <u32> traffic policy link <txt>
- SDE
M10-Smart
M2
RS420
Link layer traffic policy ruleset for interface
- Reference
- interfaces ethernet <txt> vif <u32> traffic policy local-in <txt>
- SDE
M10-Smart
M2
RS420
Local input traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> traffic policy local-in <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed
high – Second policy executed
low – Third policy executed
very-low – Fourth policy executed
- interfaces ethernet <txt> vif <u32> traffic policy local-out <txt>
- SDE
M10-Smart
M2
RS420
Local output traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> traffic policy local-out <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed
high – Second policy executed
low – Third policy executed
very-low – Fourth policy executed
- interfaces ethernet <txt> vif <u32> traffic policy out <txt>
- SDE
M10-Smart
M2
RS420
Output traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> traffic policy out <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed before NAT
high – Second policy executed before NAT
low – First policy executed after NAT
very-low – Second policy executed after NAT
- interfaces ethernet <txt> vif <u32> traffic zone <txt>
- SDE
M10-Smart
M2
RS420
Traffic zone associated with this interface
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32>
- SDE
M10-Smart
M2
RS420
QinQ TAG-C Virtual Local Area Network (VLAN) ID
- Values
u32 – VLAN ID (1-4094)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> address <ipv4cidr|ipv6cidr|id>
- SDE
M10-Smart
M2
RS420
IP address
- Values
ipv6cidr – IPv6 address and prefix length
dhcpv6 – Dynamic Host Configuration Protocol for IPv6
ipv4cidr – IPv4 address and prefix length
dhcp – Dynamic Host Configuration Protocol
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> alarm
- SDE
M10-Smart
M2
RS420
Enable or disable alarm according the link state
- interfaces ethernet <txt> vif <u32> vif-c <u32> alarm down <txt>
- SDE
M10-Smart
M2
RS420
Alarm to be enabled if the link is down
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> description <id>
- SDE
M10-Smart
M2
RS420
Description
- Values
id – “Interface description is too long (limit 256 characters)” (1-256)
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp
- SDE
M10-Smart
M2
RS420
Dynamic Host Configuration Protocol configuration
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client
- SDE
M10-Smart
M2
RS420
DHCP client configuration
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client fallback <ipv4cidr|ipv6cidr>
- SDE
M10-Smart
M2
RS420
- Values
ipv4cidr – Fallback IP address
ipv6cidr – Fallback IP address
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client rfc3442-routes
- SDE
M10-Smart
M2
RS420
Install RFC3442 routes received from DHCP server
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client send
- SDE
M10-Smart
M2
RS420
Send user-defined options to the DHCP server
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client send dhcp-client-identifier
- SDE
M10-Smart
M2
RS420
Include the ‘dhcp-client-identifier’ option
- Instances
Unique
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client send dhcp-client-identifier base-mac
- SDE
M10-Smart
M2
RS420
Use device base mac as identifier
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client send dhcp-client-identifier serial-number
- SDE
M10-Smart
M2
RS420
Use device serial number as identifier
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client send dhcp-client-identifier string <id>
- SDE
M10-Smart
M2
RS420
Use a string as identifier
- Values
id – Identifier string (1-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client send vendor-class-identifier
- SDE
M10-Smart
M2
RS420
Include the ‘vendor-class-identifier’ option
- Instances
Unique
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcp client send vendor-class-identifier string <id>
- SDE
M10-Smart
M2
RS420
Use a string as identifier
- Values
id – Identifier string (1-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcpv6
- SDE
M10-Smart
M2
RS420
Dynamic Host Configuration Protocol v6 configuration
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcpv6 client
- SDE
M10-Smart
M2
RS420
DHCPv6 client configuration
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcpv6 client parameters-only
- SDE
M10-Smart
M2
RS420
Acquire only config parameters, not address
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcpv6 client send
- SDE
M10-Smart
M2
RS420
Send user-defined options to the DHCPv6 server
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcpv6 client send duid <id>
- SDE
M10-Smart
M2
RS420
- Values
id – DHCPv6 DUID to be sent by dhcpv6 client
- interfaces ethernet <txt> vif <u32> vif-c <u32> dhcpv6 client temporary
- SDE
M10-Smart
M2
RS420
IPv6 “temporary” address
- interfaces ethernet <txt> vif <u32> vif-c <u32> disable
- SDE
M10-Smart
M2
RS420
Disable interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> disable advisor <txt>
- SDE
M10-Smart
M2
RS420
Advisor to enable or disable the interface
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> flow
- SDE
M10-Smart
M2
RS420
Active netflow on interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> flow egress
- SDE
M10-Smart
M2
RS420
Active output traffic
- interfaces ethernet <txt> vif <u32> vif-c <u32> flow egress selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> flow ingress
- SDE
M10-Smart
M2
RS420
Active input traffic
- interfaces ethernet <txt> vif <u32> vif-c <u32> flow ingress selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip
- SDE
M10-Smart
M2
RS420
IPv4 routing parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp
- SDE
M10-Smart
M2
RS420
ARP options
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp ignore
- SDE
M10-Smart
M2
RS420
Enable arp-ignore on this interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp no-filter
- SDE
M10-Smart
M2
RS420
Disable arp-filter on this interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp no-notify
- SDE
M10-Smart
M2
RS420
Disable arp_notify on this interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp proxy
- SDE
M10-Smart
M2
RS420
Enable proxy-arp on this interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp pvlan-proxy
- SDE
M10-Smart
M2
RS420
Enable private VLAN proxy ARP on this interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp static <ipv4>
- SDE
M10-Smart
M2
RS420
Static ARP translation
- Values
ipv4 – IPv4 address to add in ARP table
- Instances
Multiple
- Required
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp static <ipv4> mac <macaddr>
- SDE
M10-Smart
M2
RS420
- Values
macaddr – MAC address
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip arp timeout <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – ARP cache entry timeout in seconds
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip igmp
- SDE
M10-Smart
M2
RS420
Internet Group Management Protocol (IGMP) parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip igmp join <ipv4>
- SDE
M10-Smart
M2
RS420
Join multicast group
- Values
ipv4 – Join multicast group on this interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip igmp last-member-query-count <u32>
- SDE
M10-Smart
M2
RS420
IGMP last member query count
- Values
u32 – IGMP last member query count (1-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip igmp last-member-query-interval <u32>
- SDE
M10-Smart
M2
RS420
IGMP last member query interval
- Values
u32 – IGMP last member query interval in deciseconds (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip igmp query-interval <u32>
- SDE
M10-Smart
M2
RS420
IGMP query interval
- Values
u32 – IGMP query interval in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip igmp query-max-response-time <u32>
- SDE
M10-Smart
M2
RS420
IGMP query response timeout value
- Values
u32 – IGMP query response timeout value in deciseconds (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip igmp version <u32>
- SDE
M10-Smart
M2
RS420
IGMP version
- Values
u32 – IGMP version used on this interface (2-3)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip multicast
- SDE
M10-Smart
M2
RS420
Multicast parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip multicast boundary-list <txt>
- SDE
M10-Smart
M2
RS420
Prefix-list to control for which groups to accept or ignore received PIM join or IGMP report messages
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf
- SDE
M10-Smart
M2
RS420
Open Shortest Path First (OSPF) parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf authentication
- SDE
M10-Smart
M2
RS420
OSPF interface authentication
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf authentication message-digest <id>
- SDE
M10-Smart
M2
RS420
MD5 authentication parameters
- Values
id – MD5 ID number (1-255)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf authentication message-digest <id> encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – MD5 encrypted key
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf authentication message-digest <id> password <txt>
- SDE
M10-Smart
M2
RS420
MD5 key
- Values
txt – MD5 Key (1-16)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf authentication password <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Plain text password
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf bandwidth <u32>
- SDE
M10-Smart
M2
RS420
Bandwidth of interface (kilobits/sec)
- Values
u32 – Bandwidth in kilobits/sec (for calculating OSPF cost) (1-10000000)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf cost <u32>
- SDE
M10-Smart
M2
RS420
Interface cost
- Values
u32 – OSPF interface cost (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf dead-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval after which neighbor is dead
- Values
u32 – OSPF dead interval in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf hello-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between hello packets
- Values
u32 – Interval between OSPF hello packets in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf mtu-ignore
- SDE
M10-Smart
M2
RS420
Disable Maximum Transmission Unit (MTU) mismatch detection
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf network <id>
- SDE
M10-Smart
M2
RS420
Network type
- Values
broadcast – Broadcast network type
non-broadcast – Non-broadcast network type
point-to-multipoint – Point-to-multipoint network type
point-to-point – Point-to-point network type
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf priority <u32>
- SDE
M10-Smart
M2
RS420
Router priority
- Values
u32 – Priority (0-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf retransmit-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between retransmitting lost link state advertisements
- Values
u32 – Retransmit interval in seconds (3-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip ospf transmit-delay <u32>
- SDE
M10-Smart
M2
RS420
Link state transmit delay
- Values
u32 – Transmit delay in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip pim
- SDE
M10-Smart
M2
RS420
Protocol Independent Multicast (PIM) parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip pim disable-bsm
- SDE
M10-Smart
M2
RS420
Disable sending and receiving bootstrap messages
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip pim disable-unicast-bsm
- SDE
M10-Smart
M2
RS420
Disable sending and receiving unicast bootstrap messages
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip pim drpriority <u32>
- SDE
M10-Smart
M2
RS420
PIM Designated Router (DR) priority
- Values
u32 – PIM DR priority for the interface (1-4294967295)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip pim hello <u32>
- SDE
M10-Smart
M2
RS420
PIM hello interval
- Values
u32 – PIM hello interval in seconds (1-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip pim passive
- SDE
M10-Smart
M2
RS420
Disable sending and receiving all PIM control messages (such as: ASSERT, BSM, HELLO, JOIN, PRUNE, REGISTER, REGISTER-STOP)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip reverse-path-filter <id>
- SDE
M10-Smart
M2
RS420
Policy for source validation by reversed path, as specified in RFC3704
- Values
strict – Enable Strict Reverse Path Forwarding as defined in RFC3704
loose – Enable Loose Reverse Path Forwarding as defined in RFC3704
disable – No source validation
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip
- SDE
M10-Smart
M2
RS420
Routing Information Protocol (RIP) parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip authentication
- SDE
M10-Smart
M2
RS420
Authentication method
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip authentication message-digest <u32>
- SDE
M10-Smart
M2
RS420
MD5 authentication parameters
- Values
u32 – MD5 ID number (1-255)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip authentication message-digest <u32> encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – MD5 encrypted key
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip authentication message-digest <u32> password <txt>
- SDE
M10-Smart
M2
RS420
MD5 key
- Values
txt – MD5 Key (1-16)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip authentication password <txt>
- SDE
M10-Smart
M2
RS420
Plain text password
- Values
txt – Plain text password (1-16)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip split-horizon
- SDE
M10-Smart
M2
RS420
Split horizon parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip split-horizon disable
- SDE
M10-Smart
M2
RS420
Disable split horizon on specified interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> ip rip split-horizon poison-reverse
- SDE
M10-Smart
M2
RS420
Enable poison reverse for split-horizon
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6
- SDE
M10-Smart
M2
RS420
IPv6 routing parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 address
- SDE
M10-Smart
M2
RS420
IPv6 address auto-configuration modes
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 address autoconf
- SDE
M10-Smart
M2
RS420
Enable acquisition of IPv6 address using stateless autoconfig
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 address eui64 <ipv6net>
- SDE
M10-Smart
M2
RS420
Assign IPv6 address using EUI-64 based on MAC address
- Values
ipv6net – 64-bit IPv6 prefix to use with EUI-64 to make address
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 address prefix-from-provider <id>
- SDE
M10-Smart
M2
RS420
- Values
id – IPv6 from Learned Prefix
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 address prefix-from-provider <id> ifc-ID <ipv6net>
- SDE
M10-Smart
M2
RS420
Assign IPv6 address using Learned Prefixes
- Values
< – 64-bit IPv6 prefix (:h:h:h:h/64>)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 dhcp-client-pd <id>
- SDE
M10-Smart
M2
RS420
- Values
id – Name of learned prefix from provider
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 disable-forwarding
- SDE
M10-Smart
M2
RS420
Disable IPv6 forwarding on this interface only
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 dup-addr-detect-transmits <u32>
- SDE
M10-Smart
M2
RS420
Number of NS messages to send while performing DAD
- Values
u32 – Number of NS messages to send while performing DAD (0-2147483647)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3
- SDE
M10-Smart
M2
RS420
IPv6 Open Shortest Path First (OSPFv3) parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 cost <u32>
- SDE
M10-Smart
M2
RS420
Interface cost
- Values
u32 – OSPFv3 cost (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 dead-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval after which neighbor is declared dead
- Values
u32 – Neighbor dead interval in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 hello-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between hello packets
- Values
u32 – Interval between OSPFv3 hello packets in seconds (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 ifmtu <u32>
- SDE
M10-Smart
M2
RS420
Interface MTU
- Values
u32 – Interface MTU value (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 instance-id <u32>
- SDE
M10-Smart
M2
RS420
Instance-id
- Values
u32 – Instance Id (0-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 mtu-ignore
- SDE
M10-Smart
M2
RS420
Disable Maximum Transmission Unit mismatch detection
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 passive
- SDE
M10-Smart
M2
RS420
Disable forming of adjacency
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 priority <u32>
- SDE
M10-Smart
M2
RS420
Router priority
- Values
u32 – Priority (0-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 retransmit-interval <u32>
- SDE
M10-Smart
M2
RS420
Interval between retransmitting lost link state advertisements
- Values
u32 – Retransmit interval in seconds (3-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ospfv3 transmit-delay <u32>
- SDE
M10-Smart
M2
RS420
Link state transmit delay
- Values
u32 – Link state transmit delay (1-65535)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ripng
- SDE
M10-Smart
M2
RS420
Routing Information Protocol (RIPng)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ripng split-horizon
- SDE
M10-Smart
M2
RS420
Split horizon parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ripng split-horizon disable
- SDE
M10-Smart
M2
RS420
Disable split horizon
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 ripng split-horizon poison-reverse
- SDE
M10-Smart
M2
RS420
Enable poison reverse for split-horizon
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert
- SDE
M10-Smart
M2
RS420
Configure parameters for sending Router Advertisements (RAs)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert cur-hop-limit <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in the Current Hop Limit field in RAs
- Values
u32 – Value to place in the Current Hop Limit field in RAs (0-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert default-lifetime <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in Router Lifetime field in RAs
- Values
u32 – Value in seconds to be placed in Router Lifetime field in RAs (4-9000)
u32 – This means “not a default router”, in Router Lifetime field (0)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert default-preference <txt>
- SDE
M10-Smart
M2
RS420
Default router preference
- Values
low – Default router is low preference
medium – Default router is medium preference
high – Default router is high preference
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert link-mtu <u32>
- SDE
M10-Smart
M2
RS420
Value of link MTU to place in RAs
- Values
u32 – Do not send MTU options in RAs (0)
u32 – Value of link MTU to place in RAs (1280-2147483647)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert managed-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Value for “managed address configuration” flag in RAs
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert max-interval <u32>
- SDE
M10-Smart
M2
RS420
Maximum interval between unsolicited multicast RAs
- Values
u32 – Maximum interval in seconds between unsolicited multicast RAs (4-1800)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert min-interval <u32>
- SDE
M10-Smart
M2
RS420
Minimum interval between unsolicited multicast RAs
- Values
u32 – Minimum interval in seconds between unsolicited multicast RAs (3-1350)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert name-server <ipv6>
- SDE
M10-Smart
M2
RS420
- Values
ipv6 – IPv6 address of a Recursive DNS Server
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert other-config-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Value to be placed in the “other configuration” flag in RAs
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert prefix <ipv6net>
- SDE
M10-Smart
M2
RS420
IPv6 prefix to be advertised in Router Advertisements (RAs)
- Values
ipv6net – IPv6 prefix to be advertized in Router Advertisements (RAs)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert prefix <ipv6net> autonomous-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Whether prefix can be used for address auto-configuration
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert prefix <ipv6net> on-link-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Flag that prefix can be used for on-link determination
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert prefix <ipv6net> preferred-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain preferred
- Values
u32 – Time in seconds that the prefix will remain preferred (0-2147483647)
infinity – Prefix will remain preferred forever
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert prefix <ipv6net> valid-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain valid
- Values
u32 – Time in seconds that the prefix will remain valid (0-2147483647)
infinity – Prefix will remain valid forever
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert reachable-time <u32>
- SDE
M10-Smart
M2
RS420
Value to be placed in “Reachable Time” field in RAs
- Values
u32 – Reachable Time value in RAs (in milliseconds) (1-3600000)
u32 – Reachable Time 0 (i.e., unspecified by this router) (0)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert retrans-timer <u32>
- SDE
M10-Smart
M2
RS420
Value to place in “Retrans Timer” field in RAs.
- Values
u32 – Value in milliseconds to place in “Retrans Timer” field in RAs (0-2147483647)
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert send-advert <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Enable/disable sending RAs
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert used-prefixes
- SDE
M10-Smart
M2
RS420
Delegate prefixes used on the interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert used-prefixes autonomous-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Whether prefix can be used for address auto-configuration
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert used-prefixes on-link-flag <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Flag that prefix can be used for on-link determination
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert used-prefixes preferred-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain preferred
- Values
u32 – Time in seconds that the prefix will remain preferred (0-2147483647)
infinity – Prefix will remain preferred forever
- interfaces ethernet <txt> vif <u32> vif-c <u32> ipv6 router-advert used-prefixes valid-lifetime <u32|id>
- SDE
M10-Smart
M2
RS420
Time in seconds that the prefix will remain valid
- Values
u32 – Time in seconds that the prefix will remain valid (0-2147483647)
infinity – Prefix will remain valid forever
- interfaces ethernet <txt> vif <u32> vif-c <u32> mac <macaddr>
- SDE
M10-Smart
M2
RS420
- Values
macaddr – Media Access Control (MAC) address
- interfaces ethernet <txt> vif <u32> vif-c <u32> mtu <u32>
- SDE
M10-Smart
M2
RS420
Maximum Transmission Unit (MTU)
- Values
u32 – Maximum Transmission Unit (MTU) (68-9000)
- interfaces ethernet <txt> vif <u32> vif-c <u32> tcp-mss <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – Change tcp-mss value
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic
- SDE
M10-Smart
M2
RS420
Traffic processing options
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic control
- SDE
M10-Smart
M2
RS420
Traffic control for interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic control in <id>
- SDE
M10-Smart
M2
RS420
Ingress traffic control for interface
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic control out <id>
- SDE
M10-Smart
M2
RS420
Egress traffic control for interface
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat
- SDE
M10-Smart
M2
RS420
Network Address Translation (NAT) parameters
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination
- SDE
M10-Smart
M2
RS420
Destination NAT settings
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32>
- SDE
M10-Smart
M2
RS420
Rule number for NAT
- Values
u32 – Number for this NAT rule (1-9999)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> address <ipv4|ipv4net|ipv4range|id>
- SDE
M10-Smart
M2
RS420
IP address, subnet, range or redirect
- Values
ipv4 – NAT to the specified IP address
ipv4net – NAT to the specified network address
ipv4range – NAT to the specified IP range
redirect – NAT to the interface address
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Rule description
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> log
- SDE
M10-Smart
M2
RS420
Log packets to which this rule has been applied
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> log level <txt>
- SDE
M10-Smart
M2
RS420
Loggin level
- Values
emerg – Emergency messages
alert – Urgent messages
crit – Critical messages
err – Error messages
warn – Warning messages
notice – Messages for further investigation
info – Informational messages
debug – Debug messages
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> log prefix <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Log message prefix text, up to 29 characters
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> network <ipv4net>
- SDE
M10-Smart
M2
RS420
IP prefix to use in translation (host part is kept)
- Values
ipv4net – NAT to the specified network address, host part of the address will remain unchanged
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> port <u32|id>
- SDE
M10-Smart
M2
RS420
NAT port
- Values
u32 – Port to use in PAT (1-65535)
range – Port range (pool, for example, 1001-1005)
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> protocol <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – NAT transport protocol
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat destination rule <u32> selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source
- SDE
M10-Smart
M2
RS420
Source NAT settings
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32>
- SDE
M10-Smart
M2
RS420
Rule number for NAT
- Values
u32 – Number for this NAT rule (1-9999)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> address <ipv4|ipv4net|ipv4range|id>
- SDE
M10-Smart
M2
RS420
IP address, subnet, range or masquerade
- Values
ipv4 – NAT to the specified IP address
ipv4net – NAT to the specified network address
ipv4range – NAT to the specified IP range
masquerade – NAT to the interface address
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Rule description
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> log
- SDE
M10-Smart
M2
RS420
Log packets to which this rule has been applied
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> log level <txt>
- SDE
M10-Smart
M2
RS420
Loggin level
- Values
emerg – Emergency messages
alert – Urgent messages
crit – Critical messages
err – Error messages
warn – Warning messages
notice – Messages for further investigation
info – Informational messages
debug – Debug messages
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> log prefix <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Log message prefix text, up to 29 characters
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> network <ipv4net>
- SDE
M10-Smart
M2
RS420
IP prefix to use in translation (host part is kept)
- Values
ipv4net – NAT to the specified network address, host part of the address will remain unchanged
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> port <u32|id>
- SDE
M10-Smart
M2
RS420
NAT port
- Values
u32 – Port to use in PAT (1-65535)
range – Port range (pool, for example, 1001-1005)
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> protocol <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – NAT transport protocol
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic nat source rule <u32> selector <txt>
- SDE
M10-Smart
M2
RS420
Traffic selector
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy
- SDE
M10-Smart
M2
RS420
Traffic policy rulesets for interface
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy in <txt>
- SDE
M10-Smart
M2
RS420
Input traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy in <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed before NAT
high – Second policy executed before NAT
low – First policy executed after NAT
very-low – Second policy executed after NAT
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy link <txt>
- SDE
M10-Smart
M2
RS420
Link layer traffic policy ruleset for interface
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy local-in <txt>
- SDE
M10-Smart
M2
RS420
Local input traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy local-in <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed
high – Second policy executed
low – Third policy executed
very-low – Fourth policy executed
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy local-out <txt>
- SDE
M10-Smart
M2
RS420
Local output traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy local-out <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed
high – Second policy executed
low – Third policy executed
very-low – Fourth policy executed
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy out <txt>
- SDE
M10-Smart
M2
RS420
Output traffic policy ruleset for interface
- Reference
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic policy out <txt> priority <txt>
- SDE
M10-Smart
M2
RS420
Priority order for traffic policy
- Values
very-high – First policy executed before NAT
high – Second policy executed before NAT
low – First policy executed after NAT
very-low – Second policy executed after NAT
- interfaces ethernet <txt> vif <u32> vif-c <u32> traffic zone <txt>
- SDE
M10-Smart
M2
RS420
Traffic zone associated with this interface
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrf <id>
- SDE
M10-Smart
M2
RS420
Virtual Routing and Forwarding domain name
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp
- SDE
M10-Smart
M2
RS420
Virtual Router Redundancy Protocol (VRRP)
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32>
- SDE
M10-Smart
M2
RS420
VRRP group number
- Values
u32 – VRRP group number (1-255)
- Instances
Multiple
- Required
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> advertise-interval <u32>
- SDE
M10-Smart
M2
RS420
Advertise interval
- Values
u32 – Advertise interval (1-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> advisor <txt>
- SDE
M10-Smart
M2
RS420
Check advisor
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> alarm <txt>
- SDE
M10-Smart
M2
RS420
Sets alarm on vrrp state change
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> authentication
- SDE
M10-Smart
M2
RS420
Authentication
- Required
- Required
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> authentication password <txt>
- SDE
M10-Smart
M2
RS420
Plain text password
- Values
txt – Plain text password (1-8)
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> authentication type <txt>
- SDE
M10-Smart
M2
RS420
Authentication type
- Values
plaintext-password – Plain text password mode
ah – IP Authentication Header mode
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Description
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> disable
- SDE
M10-Smart
M2
RS420
VRRP group disabled
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> preempt
- SDE
M10-Smart
M2
RS420
Preempt mode
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> preempt delay <u32>
- SDE
M10-Smart
M2
RS420
Preempt delay
- Values
u32 – Preempt Delay in seconds (0-1000)
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> priority <u32>
- SDE
M10-Smart
M2
RS420
Priority
- Values
u32 – Priority (1-255)
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> rfc3768-compatibility
- SDE
M10-Smart
M2
RS420
Enable RFC 3768 compatibility
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> source-address <ipv4>
- SDE
M10-Smart
M2
RS420
- Values
ipv4 – Source address for vrrp packets
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> sync-group <id>
- SDE
M10-Smart
M2
RS420
Add this vrrp group to a sync group
- Reference
- interfaces ethernet <txt> vif <u32> vif-c <u32> vrrp vrrp-group <u32> virtual-address <ipv4|ipv4cidr>
- SDE
M10-Smart
M2
RS420
Virtual address
- Values
ipv4 – Virtual IP address (up to 20 per group)
ipv4net – Virtual IP address with prefix (up to 20 per group)
- Instances
Multiple
- interfaces ethernet <txt> vif <u32> vrf <id>
- SDE
M10-Smart
M2
RS420
Virtual Routing and Forwarding domain name
- Reference
- interfaces ethernet <txt> vif <u32> vrrp
- SDE
M10-Smart
M2
RS420
Virtual Router Redundancy Protocol (VRRP)
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32>
- SDE
M10-Smart
M2
RS420
VRRP group number
- Values
u32 – VRRP group number (1-255)
- Instances
Multiple
- Required
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> advertise-interval <u32>
- SDE
M10-Smart
M2
RS420
Advertise interval
- Values
u32 – Advertise interval (1-255)
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> advisor <txt>
- SDE
M10-Smart
M2
RS420
Check advisor
- Reference
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> alarm <txt>
- SDE
M10-Smart
M2
RS420
Sets alarm on vrrp state change
- Reference
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> authentication
- SDE
M10-Smart
M2
RS420
Authentication
- Required
- Required
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> authentication password <txt>
- SDE
M10-Smart
M2
RS420
Plain text password
- Values
txt – Plain text password (1-8)
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> authentication type <txt>
- SDE
M10-Smart
M2
RS420
Authentication type
- Values
plaintext-password – Plain text password mode
ah – IP Authentication Header mode
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Description
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> disable
- SDE
M10-Smart
M2
RS420
VRRP group disabled
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> preempt
- SDE
M10-Smart
M2
RS420
Preempt mode
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> preempt delay <u32>
- SDE
M10-Smart
M2
RS420
Preempt delay
- Values
u32 – Preempt Delay in seconds (0-1000)
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> priority <u32>
- SDE
M10-Smart
M2
RS420
Priority
- Values
u32 – Priority (1-255)
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> rfc3768-compatibility
- SDE
M10-Smart
M2
RS420
Enable RFC 3768 compatibility
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> source-address <ipv4>
- SDE
M10-Smart
M2
RS420
- Values
ipv4 – Source address for vrrp packets
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> sync-group <id>
- SDE
M10-Smart
M2
RS420
Add this vrrp group to a sync group
- Reference
- interfaces ethernet <txt> vif <u32> vrrp vrrp-group <u32> virtual-address <ipv4|ipv4cidr>
- SDE
M10-Smart
M2
RS420
Virtual address
- Values
ipv4 – Virtual IP address (up to 20 per group)
ipv4net – Virtual IP address with prefix (up to 20 per group)
- Instances
Multiple
- interfaces ethernet <txt> vrf <id>
- SDE
M10-Smart
M2
RS420
Virtual Routing and Forwarding domain name
- Reference
- interfaces ethernet <txt> vrrp
- SDE
M10-Smart
M2
RS420
Virtual Router Redundancy Protocol (VRRP)
- interfaces ethernet <txt> vrrp vrrp-group <u32>
- SDE
M10-Smart
M2
RS420
VRRP group number
- Values
u32 – VRRP group number (1-255)
- Instances
Multiple
- Required
- interfaces ethernet <txt> vrrp vrrp-group <u32> advertise-interval <u32>
- SDE
M10-Smart
M2
RS420
Advertise interval
- Values
u32 – Advertise interval (1-255)
- interfaces ethernet <txt> vrrp vrrp-group <u32> advisor <txt>
- SDE
M10-Smart
M2
RS420
Check advisor
- Reference
- interfaces ethernet <txt> vrrp vrrp-group <u32> alarm <txt>
- SDE
M10-Smart
M2
RS420
Sets alarm on vrrp state change
- Reference
- interfaces ethernet <txt> vrrp vrrp-group <u32> authentication
- SDE
M10-Smart
M2
RS420
Authentication
- Required
- Required
- interfaces ethernet <txt> vrrp vrrp-group <u32> authentication encrypted-password <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted password
- interfaces ethernet <txt> vrrp vrrp-group <u32> authentication password <txt>
- SDE
M10-Smart
M2
RS420
Plain text password
- Values
txt – Plain text password (1-8)
- interfaces ethernet <txt> vrrp vrrp-group <u32> authentication type <txt>
- SDE
M10-Smart
M2
RS420
Authentication type
- Values
plaintext-password – Plain text password mode
ah – IP Authentication Header mode
- interfaces ethernet <txt> vrrp vrrp-group <u32> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Description
- interfaces ethernet <txt> vrrp vrrp-group <u32> disable
- SDE
M10-Smart
M2
RS420
VRRP group disabled
- interfaces ethernet <txt> vrrp vrrp-group <u32> preempt
- SDE
M10-Smart
M2
RS420
Preempt mode
- interfaces ethernet <txt> vrrp vrrp-group <u32> preempt delay <u32>
- SDE
M10-Smart
M2
RS420
Preempt delay
- Values
u32 – Preempt Delay in seconds (0-1000)
- interfaces ethernet <txt> vrrp vrrp-group <u32> priority <u32>
- SDE
M10-Smart
M2
RS420
Priority
- Values
u32 – Priority (1-255)
- interfaces ethernet <txt> vrrp vrrp-group <u32> rfc3768-compatibility
- SDE
M10-Smart
M2
RS420
Enable RFC 3768 compatibility
- interfaces ethernet <txt> vrrp vrrp-group <u32> source-address <ipv4>
- SDE
M10-Smart
M2
RS420
- Values
ipv4 – Source address for vrrp packets
- interfaces ethernet <txt> vrrp vrrp-group <u32> sync-group <id>
- SDE
M10-Smart
M2
RS420
Add this vrrp group to a sync group
- Reference
- interfaces ethernet <txt> vrrp vrrp-group <u32> virtual-address <ipv4|ipv4cidr>
- SDE
M10-Smart
M2
RS420
Virtual address
- Values
ipv4 – Virtual IP address (up to 20 per group)
ipv4net – Virtual IP address with prefix (up to 20 per group)
- Instances
Multiple