pim
- protocols pim
- SDE
M10-Smart
M2
RS420
Protocol Independent Multicast (PIM) parameters
- protocols pim join-prune-interval <u32>
- SDE
M10-Smart
M2
RS420
Join/Prune send interval
- Values
u32 – Join/Prune send interval in seconds (1-65535)
- protocols pim keep-alive-timer <u32>
- SDE
M10-Smart
M2
RS420
Keep alive timer for a (S,G) flow
- Values
u32 – Keep alive timer value in seconds (1-65535)
- protocols pim never-spt-switchover
- SDE
M10-Smart
M2
RS420
Not switch over to the SPT tree after receiving the first multicast traffic packet on the Last Hop Router (LHR)
- protocols pim never-spt-switchover prefix-list <txt>
- SDE
M10-Smart
M2
RS420
Prefix-list to control for which groups not to switch over to the SPT tree
- Reference
- protocols pim never-ssm-list <txt>
- SDE
M10-Smart
M2
RS420
Prefix-list to avoid doing SSM over a range of group addresses
- Reference
- protocols pim register-accept-list <txt>
- SDE
M10-Smart
M2
RS420
Prefix-list to prevent unauthorized sources from sending REGISTER messages to the RP
- Reference
- protocols pim register-suppress-time <u32>
- SDE
M10-Smart
M2
RS420
Register suppression mechanism timer
- Values
u32 – Register suppression mechanism timer in seconds (11-65535)
- protocols pim rp
- SDE
M10-Smart
M2
RS420
PIM Rendezvous Point (RP) parameters
- protocols pim rp address <ipv4>
- SDE
M10-Smart
M2
RS420
IP address of the RP
- Values
ipv4 – IP address of the RP
- Instances
Multiple
- Required
- protocols pim rp address <ipv4> group <ipv4net>
- SDE
M10-Smart
M2
RS420
Multicast group address range
- Values
ipv4net – Multicast group Address range to cover
- Instances
Multiple
- protocols pim rp keep-alive-timer <u32>
- SDE
M10-Smart
M2
RS420
Keep alive timer for a (S,G) flow at the RP
- Values
u32 – Keep alive timer value in seconds (by default: 3 * register-suppress-time + 5) (1-65535)