ntp
- system ntp
- SDE
M10-Smart
M2
RS420
Network Time Protocol (NTP) configuration
- system ntp authenticate
- SDE
M10-Smart
M2
RS420
Authenticate option
- system ntp authenticate disable
- SDE
M10-Smart
M2
RS420
Disable authentication (enabled by default)
- system ntp authentication-key <u32>
- SDE
M10-Smart
M2
RS420
Key ID used for authentication
- Values
u32 – Key ID (1-65534)
- Instances
Multiple
- Required
- system ntp authentication-key <u32> encrypted-md5 <password>
- SDE
M10-Smart
M2
RS420
- Values
password – Encrypted message for authentication
- system ntp authentication-key <u32> md5 <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Message for authentication
- system ntp broadcast <ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
Broadcast/Multicast mode association “The IANA has assigned the multicast group address IPv4 224.0.1.1 and IPv6 ff05::101 exclusively to NTP”
- Values
ipv4 – Broadcast/Multicast IP address
ipv6 – Broadcast/Multicast IPv6 address
- Instances
Multiple
- system ntp broadcast <ipv4|ipv6> key <u32>
- SDE
M10-Smart
M2
RS420
Key ID used for authentication
- Values
u32 – Key ID (1-65534)
- system ntp broadcast <ipv4|ipv6> max-poll <u32>
- SDE
M10-Smart
M2
RS420
Maximum poll interval in seconds as a power of two
- Values
u32 – Maximum poll interval in seconds as a power of two (3-17)
- system ntp broadcast <ipv4|ipv6> min-poll <u32>
- SDE
M10-Smart
M2
RS420
Minimum poll interval in seconds as a power of two
- Values
u32 – Minimum poll interval in seconds as a power of two (3-17)
- system ntp broadcast <ipv4|ipv6> ttl <u32>
- SDE
M10-Smart
M2
RS420
Time-to-life to use on broadcast/multicast server
- Values
u32 – Time-to-life to use on broadcast/multicast server (0-7)
- system ntp broadcast <ipv4|ipv6> version <u32>
- SDE
M10-Smart
M2
RS420
NTP version used
- Values
u32 – NTP versions allowed (1-4)
- system ntp broadcast-client
- SDE
M10-Smart
M2
RS420
Enables reception of broadcast server messages to any local interface
- system ntp broadcast-delay <u32>
- SDE
M10-Smart
M2
RS420
Network delay between the local and remote servers
- Values
u32 – Delay in microseconds (3-7)
- system ntp client
- SDE
M10-Smart
M2
RS420
Network Time Protocol (NTP) client
- system ntp client address <ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
IP address
- Values
ipv4 – IP address
ipv6 – IPv6 address
- Instances
Multiple
- system ntp logging
- SDE
M10-Smart
M2
RS420
NTP logging
- Instances
Unique
- system ntp logging all
- SDE
M10-Smart
M2
RS420
Apply log level to all existing types.
- system ntp logging type <txt>
- SDE
M10-Smart
M2
RS420
Apply to specific log types.
- Values
info – General information logs
events – General event logs
status – Status logs
statistics – Statistics logs
clock – Clock related logs
peer – Peer related logs
sys – System related logs
sync – Synchronization logs
- Instances
List of values
- system ntp master
- SDE
M10-Smart
M2
RS420
Reference Clock
- system ntp master prefer
- SDE
M10-Smart
M2
RS420
Marks the Reference Clock as preferred
- system ntp master stratum <u32>
- SDE
M10-Smart
M2
RS420
Stratum number assigned to Reference Clock
- Values
u32 – Stratum number (0-15)
- system ntp multicast-client <ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
Enables reception of multicast server messages to the multicast group address(es) specified
- Values
ipv4 – IP address
ipv6 – IPv6 address
- Instances
Multiple
- system ntp peer <ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
Network Time Protocol (NTP) peer
- Values
ipv4 – IP address
ipv6 – IPv6 address
- Instances
Multiple
- system ntp peer <ipv4|ipv6> key <u32>
- SDE
M10-Smart
M2
RS420
Key ID used for authentication
- Values
u32 – Key ID (1-65534)
- system ntp peer <ipv4|ipv6> local-address <ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
Local IP address to use as source for requests to this peer
- Values
ipv4 – Local IPv4 address for this peer
ipv6 – Local IPv6 address for this peer
- Local IP address
- system ntp peer <ipv4|ipv6> local-interface <ifc>
- SDE
M10-Smart
M2
RS420
- Values
ifc – Interface to use as source for requests to this peer
- system ntp peer <ipv4|ipv6> local-vrf <id>
- SDE
M10-Smart
M2
RS420
VRF where socket is bound
- Reference
- system ntp peer <ipv4|ipv6> max-poll <u32>
- SDE
M10-Smart
M2
RS420
Maximum poll interval in seconds as a power of two
- Values
u32 – Maximum poll interval in seconds as a power of two (3-17)
- system ntp peer <ipv4|ipv6> min-poll <u32>
- SDE
M10-Smart
M2
RS420
Minimum poll interval in seconds as a power of two
- Values
u32 – Minimum poll interval in seconds as a power of two (3-17)
- system ntp peer <ipv4|ipv6> no-select
- SDE
M10-Smart
M2
RS420
Marks the server as unused
- system ntp peer <ipv4|ipv6> prefer
- SDE
M10-Smart
M2
RS420
Marks the server as preferred
- system ntp peer <ipv4|ipv6> version <u32>
- SDE
M10-Smart
M2
RS420
NTP version used
- Values
u32 – NTP versions allowed (1-4)
- system ntp server
- SDE
M10-Smart
M2
RS420
Network Time Protocol (NTP) server
- system ntp server address <fqdn|ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
- Values
fqdn – IP address or name of the server
ipv4 – IP address or name of the server
ipv6 – IP address or name of the server
- Instances
Multiple
- system ntp server address <fqdn|ipv4|ipv6> burst
- SDE
M10-Smart
M2
RS420
Send a burst of eight packets when the server is reachable
- system ntp server address <fqdn|ipv4|ipv6> key <u32>
- SDE
M10-Smart
M2
RS420
Key-ID used for authentication
- Values
u32 – Key ID (1-65534)
- system ntp server address <fqdn|ipv4|ipv6> local-address <ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
Local IP address to use as source for requests to this server
- Values
ipv4 – Local IPv4 address for this server
ipv6 – Local IPv6 address for this server
- Local IP address
- system ntp server address <fqdn|ipv4|ipv6> local-interface <ifc>
- SDE
M10-Smart
M2
RS420
- Values
ifc – Interface to use as source for requests to this server
- system ntp server address <fqdn|ipv4|ipv6> local-vrf <id>
- SDE
M10-Smart
M2
RS420
VRF where socket is bound
- Reference
- system ntp server address <fqdn|ipv4|ipv6> max-poll <u32>
- SDE
M10-Smart
M2
RS420
Maximum poll interval in seconds as a power of two
- Values
u32 – Maximum poll interval in seconds as a power of two (3-17)
- system ntp server address <fqdn|ipv4|ipv6> min-poll <u32>
- SDE
M10-Smart
M2
RS420
Minimum poll interval in seconds as a power of two
- Values
u32 – Minimum poll interval in seconds as a power of two (3-17)
- system ntp server address <fqdn|ipv4|ipv6> no-select
- SDE
M10-Smart
M2
RS420
Marks the server as unused
- system ntp server address <fqdn|ipv4|ipv6> preempt
- SDE
M10-Smart
M2
RS420
Specifies the association as preemptable rather than the default persistent
- system ntp server address <fqdn|ipv4|ipv6> prefer
- SDE
M10-Smart
M2
RS420
Marks the server as preferred
- system ntp server address <fqdn|ipv4|ipv6> version <u32>
- SDE
M10-Smart
M2
RS420
NTP version used
- Values
u32 – NTP versions allowed (1-4)
- system ntp server dhcp
- SDE
M10-Smart
M2
RS420
Enable configuration discovery via DHCP options
- system ntp server dhcp interface <ifc>
- SDE
M10-Smart
M2
RS420
- Values
ifc – Enable configuration discovery via DHCP for specified interface
- Instances
Multiple
- system ntp trusted-key <u32>
- SDE
M10-Smart
M2
RS420
Key(s) ID used for authentication
- Values
u32 – Key ID (1-65534)
- Instances
Multiple