ping
- ping <ipv4|ipv6|txt>
- SDE
M10-Smart
M2
RS420
Send Internet Control Message Protocol (ICMP) echo request
- Values
ipv4 – IPv4 address
ipv6 – IPv6 address
hostname – Hostname
- Options
- no-loopback
Supress loopback of multicast packets
- tos <u32>
Set Quality of Service related bits in ICMP datagrams
- Values
u32 – Mark packets with specified TOS
- vrf <id>
Set source address to a specific VRF
- Reference
- Values
id – VRF name
- deadline <float>
Timeout before exit, regardless of sent/rcvd packet number
- Values
float – Time in seconds before ping exits
- numeric
Numeric output only, without resolving DNS names
- count <int>
Send a specific number of requests before stopping
- Values
int – Number of ping requests to be sent
- verbose
Verbose output
- mark <int>
Mark request for special processing
- Values
int – Mark tag for the outgoing packets
- timeout <float>
Timeout for each individual ping response
- Values
float – Time in seconds to wait for a response
- local-address <value>
Use local IP address as the source address of the connection
- Values
value – Local IP address
- quiet
Quiet output (print summary lines only)
- interval <float>
Waiting time between each packet sending
- Values
float – Interval in seconds between each packet transmission
- bypass-route
Bypass normal routing tables and send ping directly
- adaptive
Adaptively set interpacket interval
- allow-broadcast
Allow pinging a broadcast address
- record-route
Use Record-Route option
- audible
Audible ping
- pattern <int>
Pattern to fill out the packet
- Values
int – Pattern bytes
- size <int>
Specify number of data bytes to be sent
- Values
int – Number of bytes to send
- timestamp
Print timestamp before each output line
- flood
Send 100 requests per second
- interface <ipv4|ipv6|ifc>
Set source address to a specific interface address
- Values
ipv4 – Address or interface name
ipv6 – Address or interface name
ifc – Address or interface name
- ttl <u32>
Set the IP Time to Live
- Values
u32 – Maximum packet lifetime