wlan
----
.. osdx:cfgcmd:: controllers wlan
.. raw:: html
M10-Smart
M2
RS420
Configuration of WLAN-device and radio-modules
.. osdx:cfgcmd:: controllers wlan country
.. raw:: html
M10-Smart
M2
RS420
Country selection
:arg txt:
ISO 3166-1 alpha-2 country ID where the device is located (2)
.. osdx:cfgcmd:: controllers wlan installation
.. raw:: html
M10-Smart
M2
RS420
Device installation
.. osdx:cfgcmd:: controllers wlan installation indoor
.. raw:: html
M10-Smart
M2
RS420
Device operates indoors
.. osdx:cfgcmd:: controllers wlan installation outdoor
.. raw:: html
M10-Smart
M2
RS420
Device operates outdoors
.. osdx:cfgcmd:: controllers wlan radios
.. raw:: html
M10-Smart
M2
RS420
WLAN Radio device configuration
:arg txt:
Radio device name
:instances: Multiple
.. osdx:cfgcmd:: controllers wlan radios antenna-selection
.. raw:: html
M10-Smart
M2
RS420
List of antennas to be used for sending/receiving
.. osdx:cfgcmd:: controllers wlan radios antenna-selection rx
.. raw:: html
M10-Smart
M2
RS420
List of antennas to be used for receiving (ALL if empty)
:arg txt:
List of antenna names, comma-separated
:instances: Multiple
.. osdx:cfgcmd:: controllers wlan radios antenna-selection tx
.. raw:: html
M10-Smart
M2
RS420
List of antennas to be used for sending (ALL if empty)
:arg txt:
List of antenna names, comma-separated
:instances: Multiple
.. osdx:cfgcmd:: controllers wlan radios auto-channel-selection
.. raw:: html
M10-Smart
M2
RS420
Settings for automatic channel selection
.. osdx:cfgcmd:: controllers wlan radios auto-channel-selection blocked-channels
.. raw:: html
M10-Smart
M2
RS420
Channels to avoid when performing auto-channel selection
:arg u32:
List of channels, comma-separated
.. osdx:cfgcmd:: controllers wlan radios background-scanning
.. raw:: html
M10-Smart
M2
RS420
Neighbor background scanning parameters
.. osdx:cfgcmd:: controllers wlan radios background-scanning enable
.. raw:: html
M10-Smart
M2
RS420
Enable neighbor background scanning on this radio module
.. osdx:cfgcmd:: controllers wlan radios background-scanning sweep-interval
.. raw:: html
M10-Smart
M2
RS420
Number of seconds the neighbors are kept in the database if not seen again
:arg u32:
Neighbors maximum age (60-86400)
.. osdx:cfgcmd:: controllers wlan radios band
.. raw:: html
M10-Smart
M2
RS420
WLAN frequency band where the radio device operates
:arg txt:
Base frequency in Gigahertz
.. osdx:cfgcmd:: controllers wlan radios beacon-interval
.. raw:: html
M10-Smart
M2
RS420
Time between two consecutive beacon frames
:arg u32:
Time in milliseconds (40-3500)
.. osdx:cfgcmd:: controllers wlan radios channel
.. raw:: html
M10-Smart
M2
RS420
Operational 802.11 WLAN channel
:arg "auto":
Auto-channel selection
:arg u32:
Channel number
.. osdx:cfgcmd:: controllers wlan radios disable
.. raw:: html
M10-Smart
M2
RS420
Disable radio device
.. osdx:cfgcmd:: controllers wlan radios disable-short-gi
.. raw:: html
M10-Smart
M2
RS420
Disable short guard-interval
.. osdx:cfgcmd:: controllers wlan radios mode
.. raw:: html
M10-Smart
M2
RS420
List of WLAN modes allowed by this radio device
:arg txt:
802.11 WLAN mode
:instances: Multiple
.. osdx:cfgcmd:: controllers wlan radios tx-power
.. raw:: html
M10-Smart
M2
RS420
Conducted transmission power used by the radio device
.. osdx:cfgcmd:: controllers wlan radios tx-power dbm
.. raw:: html
M10-Smart
M2
RS420
Conducted transmission power, in dBm, used by the radio device
:arg u32:
Transmission power in dBm