.. _example_interfaces_wlan_band:

####
Band
####

The following scenarios show how to configure WLAN capable devices to operate
on the 2.4GHz and in the 5GHz band.

.. image:: wlanbands.svg
  :width: 800

******************
Band Configuration
******************

Description
===========

In this example, a WLAN interface will be created on top of the 2.4GHz
or 5GHz radio module in ``access-point`` mode. Then, correct operation
will be checked using operational commands.

Scenario
========

.. include:: band/bandconfiguration

.. raw:: html

  <hr>