.. _example_service_nsm_checkudpoperation:

###################
Check Udp Operation
###################

This scenario shows how to configure Network Service Monitor (NSM) operations to measure network quality
using active traffic probes and the UDP SLA protocol. In addition, the UDP NSM responder service is configured.

.. image:: common.svg
  :width: 800

*********************
Test IPv4 Destination
*********************

Description
===========

In this scenario, UDP NSM operations are configured in DUT0 (using an IPv4 destination address)
and the UDP NSM responder service is configured in DUT1.

Scenario
========

.. include:: checkudpoperation/testipv4destination

.. raw:: html

  <hr>

**************************
Test IPv4 FQDN Destination
**************************

Description
===========

In this scenario, UDP NSM operations are configured in DUT0 (using a Fully Qualified Domain Name
as the IPv4 destination address) and the UDP NSM responder service is configured in DUT1.

Scenario
========

.. include:: checkudpoperation/testipv4fqdndestination

.. raw:: html

  <hr>

*********************
Test IPv6 Destination
*********************

Description
===========

In this scenario, UDP NSM operations are configured in DUT0 (using an IPv6 destination address)
and the UDP NSM responder service is configured in DUT1.

Scenario
========

.. include:: checkudpoperation/testipv6destination

.. raw:: html

  <hr>

**************************
Test IPv6 FQDN Destination
**************************

Description
===========

In this scenario, UDP NSM operations are configured in DUT0 (using a Fully Qualified Domain Name
as the IPv6 destination address) and the UDP NSM responder service is configured in DUT1.

Scenario
========

.. include:: checkudpoperation/testipv6fqdndestination

.. raw:: html

  <hr>