.. _example_service_telnet_telnetconnection:

#################
Telnet Connection
#################

These scenarios show how to configure telnet connections with an explanation of the
different options.

.. image:: telnet.svg
  :width: 800

*****************
Telnet Connection
*****************

Description
===========

In this scenario, a telnet connection is created using the default configuration values.

Scenario
========

.. include:: telnetconnection/telnetconnection

.. raw:: html

  <hr>

*******************************
Telnet Connection Specific Port
*******************************

Description
===========

In this scenario, a telnet connection is created using a specific port
different than the default one, to link server and client.

Scenario
========

.. include:: telnetconnection/telnetconnectionspecificport

.. raw:: html

  <hr>

**********************************
Telnet Connection Specific Address
**********************************

Description
===========

In this scenario, two telnet connections are created using the
ip address defined on the client.

Scenario
========

.. include:: telnetconnection/telnetconnectionspecificaddress

.. raw:: html

  <hr>

******************************
Telnet Connection Specific VRF
******************************

Description
===========

In this scenario, a telnet connection is established via the VRF
specified on the client.

Scenario
========

.. include:: telnetconnection/telnetconnectionspecificvrf

.. raw:: html

  <hr>

*******************************************
Telnet Connection Specific Listen Addresses
*******************************************

Description
===========

In this scenario, two telnet connections are established, one for each
address defined at server, which are dedicated to listen for requests from a client ip address.

Scenario
========

.. include:: telnetconnection/telnetconnectionspecificlistenaddresses

.. raw:: html

  <hr>

**********************
Telnet Connection IPv6
**********************

Description
===========

In this scenario, a telnet connection is created by using an IPV6 address instead of an IPV4.

Scenario
========

.. include:: telnetconnection/telnetconnectionipv6

.. raw:: html

  <hr>