client
- monitor test performance client <ipv4|ipv6|txt>
- SDE
M10-Smart
M2
RS420
AresC640
Perform a bandwidth test for the specified host
- Values:
ipv4 – IPv4 address
ipv6 – IPv6 address
hostname – Hostname
- Options:
- bandwidth <txt>
Set target bandwidth (0 to disable limit)
- Values:
txt – Bandwidth value
- udp
Use udp protocol instead of tcp
- vrf <id>
Client VRF to use
- Reference:
- Values:
id – VRF name
- port <u32>
Initiate the bandwidth-test in a certain port
- Values:
u32 – Port in which bandwidth-test will be initiated (default: 5001)
- duration <u32>
Time limit in seconds for the bandwidth-test (default: 10s)
- Values:
u32 – Time in seconds to transmit
- bytes <txt>
Maximum amount of bytes to transmit in the test
- Values:
txt – Number of bytes to transmit
- local-address <ipv4|ipv6|txt>
Bind the client to a specific address
- Values:
ipv4 – Specific address to bind the client to
ipv6 – Specific address to bind the client to
txt – Specific address to bind the client to
- tos <u32>
Set IP type of service
- Values:
u32 – Mark packets with specified ToS