Check Connection
This scenario shows how to configure 802.1x authentication and accounting for an Ethernet interface.
Test Authentication
Description
DUT0 is configured with a 802.1x authenticated interface. DUT1 is authenticated successfully and can ping DUT0.
Scenario
Step 1: Set the following configuration in DUT0:
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth1 address 192.168.100.1/24 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 key enq88RORo0P5x3Wtyxfwerkj45sdLKJdnvdSASDi set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set interfaces ethernet eth1 802.1x authenticator aaa authentication list1
Step 2: Set the following configuration in DUT1:
set interfaces ethernet eth0 address 192.168.100.2/24 set interfaces ethernet eth0 802.1x supplicant username testing set interfaces ethernet eth0 802.1x supplicant password password
Step 3: Ping IP address 10.215.168.1 from DUT0:
admin@DUT0$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.279 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.279/0.279/0.279/0.000 ms
Step 4: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=399 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 399.465/399.465/399.465/0.000 ms
Step 5: Run command interfaces ethernet eth1 802.1x authenticator show stats at DUT0 and check if output matches the following regular expressions:
Access Accepts\s+1Show output
--------------------------------- Field Value --------------------------------- Access Requests 10 Access Retransmissions 0 Access Accepts 1 Access Rejects 0 Access Challenges 9 Malformed Access Responses 0 Bad Authenticators 0 Pending Requests 0 Timeouts 0 Unknown Types 0 Dropped Packets 0
Step 6: Run command interfaces ethernet eth0 802.1x supplicant show stats at DUT1 and check if output matches the following regular expressions:
Port Status\s+AuthorizedShow output
---------------------------- Field Value ---------------------------- Port Status Authorized Rx Frames 11 Tx Frames 11 Tx Start Frames 1 Tx Logoff Frames 0 Tx Resp Frames 10 Rx Req ID Frames 1 Rx Req Frames 9 Invalid 0
Test Authentication Deny
Description
DUT0 is configured with a 802.1x authenticated interface. DUT1 fails to authenticate and all its traffic is dropped.
Scenario
Step 1: Set the following configuration in DUT0:
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth1 address 192.168.100.1/24 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 key enq88RORo0P5x3Wtyxfwerkj45sdLKJdnvdSASDi set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set interfaces ethernet eth1 802.1x authenticator aaa authentication list1
Step 2: Set the following configuration in DUT1:
set interfaces ethernet eth0 address 192.168.100.2/24 set interfaces ethernet eth0 802.1x supplicant username bad_username set interfaces ethernet eth0 802.1x supplicant password bad_password
Step 3: Ping IP address 10.215.168.1 from DUT0:
admin@DUT0$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.324 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.324/0.324/0.324/0.000 ms
Step 4: Expect a failure in the following command:
Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 5 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. From 192.168.100.2 icmp_seq=1 Destination Host Unreachable From 192.168.100.2 icmp_seq=2 Destination Host Unreachable From 192.168.100.2 icmp_seq=3 Destination Host Unreachable --- 192.168.100.1 ping statistics --- 5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 99ms pipe 3
Step 5: Run command interfaces ethernet eth1 802.1x authenticator show status at DUT0 and check if output contains the following tokens:
Current status: ENABLEDShow output
Current status: ENABLED
Step 6: Run command interfaces ethernet eth0 802.1x supplicant show status at DUT1 and expect this output:
Show output
Error: no valid response was received CLI Error: Command error
Test Deauthentication
Description
DUT0 is configured with a 802.1x authenticated interface. DUT1 is authenticated successfully and then, when its configuration changes, it fails to authenticate and all its traffic is dropped.
Scenario
Step 1: Set the following configuration in DUT0:
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth1 address 192.168.100.1/24 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 key enq88RORo0P5x3Wtyxfwerkj45sdLKJdnvdSASDi set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set interfaces ethernet eth1 802.1x authenticator aaa authentication list1
Step 2: Set the following configuration in DUT1:
set interfaces ethernet eth0 address 192.168.100.2/24 set interfaces ethernet eth0 802.1x supplicant username testing set interfaces ethernet eth0 802.1x supplicant password password
Step 3: Ping IP address 10.215.168.1 from DUT0:
admin@DUT0$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.307 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.307/0.307/0.307/0.000 ms
Step 4: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=407 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 407.316/407.316/407.316/0.000 ms
Step 5: Set the following configuration in DUT1:
set interfaces ethernet eth0 802.1x supplicant username bad_username set interfaces ethernet eth0 802.1x supplicant password bad_password
Step 6: Expect a failure in the following command:
Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. --- 192.168.100.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Step 7: Run command interfaces ethernet eth1 802.1x authenticator show stats at DUT0 and check if output matches the following regular expressions:
Access Accepts\s+1 Access Rejects\s+[1-9]\d?Show output
--------------------------------- Field Value --------------------------------- Access Requests 19 Access Retransmissions 0 Access Accepts 1 Access Rejects 1 Access Challenges 17 Malformed Access Responses 0 Bad Authenticators 0 Pending Requests 0 Timeouts 0 Unknown Types 0 Dropped Packets 0
Step 8: Run command interfaces ethernet eth0 802.1x supplicant show stats at DUT1 and check if output matches the following regular expressions:
Port Status\s+Unauthorized Tx Start Frames\s+[1-9]\d?Show output
------------------------------ Field Value ------------------------------ Port Status Unauthorized Rx Frames 21 Tx Frames 21 Tx Start Frames 2 Tx Logoff Frames 0 Tx Resp Frames 19 Rx Req ID Frames 2 Rx Req Frames 17 Invalid 0
Test Accounting
Description
DUT0 is configured with a 802.1x authenticated interface. DUT1 is authenticated and the accounting information is sent to the RADIUS server.
Scenario
Step 1: Set the following configuration in DUT0:
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth1 address 192.168.100.1/24 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 key enq88RORo0P5x3Wtyxfwerkj45sdLKJdnvdSASDi set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set interfaces ethernet eth1 802.1x authenticator aaa authentication list1 set interfaces ethernet eth1 802.1x authenticator aaa accounting list1
Step 2: Set the following configuration in DUT1:
set interfaces ethernet eth0 address 192.168.100.2/24 set interfaces ethernet eth0 802.1x supplicant username testing set interfaces ethernet eth0 802.1x supplicant password password
Step 3: Ping IP address 10.215.168.1 from DUT0:
admin@DUT0$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.314 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.314/0.314/0.314/0.000 ms
Step 4: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=415 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 415.463/415.463/415.463/0.000 ms