.. _example_service_snmp_trap-target_checksendingalarmsandadvisors:

#################################
Check Sending Alarms And Advisors
#################################

This scenario shows how to configure a ‘trap-target‘ to send alarm and advisor notifications.
In addition, the SNMP ‘service snmp monitor traps’ command is checked.

.. image:: ../dummy.svg
  :width: 800

**********************
Test SNMPv1 Send Traps
**********************

Description
===========

A ‘trap-target‘ is configured to send alarm and advisor traps for a community in DUT0
and the ‘monitor’ command is used to check sending notifications in SNMPv1.

Scenario
========

.. include:: checksendingalarmsandadvisors/testsnmpv1sendtraps

.. raw:: html

  <hr>

***********************
Test SNMPv2c Send Traps
***********************

Description
===========

A ‘trap-target‘ is configured to send alarm and advisor traps for a community in DUT0
and the ‘monitor’ command is used to check sending notifications in SNMPv2c.

Scenario
========

.. include:: checksendingalarmsandadvisors/testsnmpv2csendtraps

.. raw:: html

  <hr>

*************************
Test SNMPv2c Send Informs
*************************

Description
===========

A ‘trap-target‘ is configured to send alarm and advisor informs for a community in DUT0
and the ‘monitor’ command is used to check sending notifications in SNMPv2c.

Scenario
========

.. include:: checksendingalarmsandadvisors/testsnmpv2csendinforms

.. raw:: html

  <hr>

**********************
Test SNMPv3 Send Traps
**********************

Description
===========

A ‘trap-target‘ is configured to send alarm and advisor traps for a user in DUT0
and the ‘monitor’ command is used to check sending notifications in SNMPv3.

Scenario
========

.. include:: checksendingalarmsandadvisors/testsnmpv3sendtraps

.. raw:: html

  <hr>

************************
Test SNMPv3 Send Informs
************************

Description
===========

A ‘trap-target‘ is configured to send alarm and advisor informs for a user in DUT0
and the ‘monitor’ command is used to check sending notifications in SNMPv3.

Scenario
========

.. include:: checksendingalarmsandadvisors/testsnmpv3sendinforms

.. raw:: html

  <hr>