.. _example_interfaces_ethernet_ipv6_router-advert_router-advert:

#############
Router-Advert
#############


.. sidebar:: Contents

  .. contents::
    :depth: 1
    :local:

The following scenarios show how to enable and customize IPv6
Router Advertisements.

.. image:: topology.svg
  :width: 400

*********************
Test RA Autonomous On
*********************

Description
===========

DUT0 is configured as a IPv6 router. RAs are automatically
enabled.

Scenario
========

.. include:: router-advert/testraautonomouson

.. raw:: html

  <hr>

**********************
Test RA Autonomous Off
**********************

Description
===========

In this scenario, RAs are sent with autonomous flag set
to false. Therefore, IPv6 hosts can not use RAs to auto
configure IPv6 address using SLAAC.

Scenario
========

.. include:: router-advert/testraautonomousoff

.. raw:: html

  <hr>

***********************
Test RA Custom Prefixes
***********************

Description
===========

In this scenario, custom prefixes are announced. By
default, only interface IP addresses are announced in RAs.

Scenario
========

.. include:: router-advert/testracustomprefixes

.. raw:: html

  <hr>

***************
Test RA Monitor
***************

Description
===========

This scenario shows how to monitor RAs using
``monitor router-advertisement`` operational command.

Scenario
========

.. include:: router-advert/testramonitor

.. raw:: html

  <hr>