Snmp Operations

In this scenario, the SNMP GET and GETNEXT operational commands are tested, using the values provided by some SNMPv2-MIB OIDs.

Test SNMP Get Request SNMPv1

Description

SNMP GET operation with SNMPv1

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces ethernet eth0 address 10.215.168.64/24
set protocols static route 0.0.0.0/0 next-hop 10.215.168.1
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Note

First configure an IP and gateway in order to have internet access.

Step 2: Modify the following configuration lines in DUT0:

set service snmp community COMMUNITY2TEST

Step 3: Run command service snmp get 10.215.168.64 oid SNMPv2-MIB::sysName.0 version v1 community COMMUNITY2TEST at DUT0 and check if output contains the following tokens:

SNMPv2-MIB::sysName.0 = STRING: osdx

Test SNMP Get Request SNMPv2c

Description

SNMP GET operation with SNMPv2c

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces ethernet eth0 address 10.215.168.64/24
set protocols static route 0.0.0.0/0 next-hop 10.215.168.1
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Note

First configure an IP and gateway in order to have internet access.

Step 2: Modify the following configuration lines in DUT0:

set service snmp community COMMUNITY2TEST

Step 3: Run command service snmp get 10.215.168.64 oid SNMPv2-MIB::sysName.0 version v2c community COMMUNITY2TEST at DUT0 and check if output contains the following tokens:

SNMPv2-MIB::sysName.0 = STRING: osdx

Test SNMP Get Request SNMPv3

Description

SNMP GET operation with SNMPv3

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces ethernet eth0 address 10.215.168.64/24
set protocols static route 0.0.0.0/0 next-hop 10.215.168.1
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Note

First configure an IP and gateway in order to have internet access.

Step 2: Modify the following configuration lines in DUT0:

set service snmp user USER2TEST authentication encrypted-password U2FsdGVkX1/kEkjFBtNWv/5WPjkS7/+IRPrv22eUvSE=
set service snmp user USER2TEST authentication protocol MD5
set service snmp user USER2TEST privacy encrypted-password U2FsdGVkX18UmLsrATaHcvfJNi/sgu9OXzahjmzWs5o=
set service snmp user USER2TEST privacy protocol AES

Step 3: Run command service snmp get 10.215.168.64 oid SNMPv2-MIB::sysName.0 version v3 user USER2TEST auth-protocol MD5 auth-key PASSWORD priv-protocol AES priv-key PASSWORD security-level authPriv at DUT0 and check if output contains the following tokens:

SNMPv2-MIB::sysName.0 = STRING: osdx

Test SNMP GetNext Request SNMPv1

Description

SNMP GETNEXT operation with SNMPv1

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces ethernet eth0 address 10.215.168.64/24
set protocols static route 0.0.0.0/0 next-hop 10.215.168.1
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Note

First configure an IP and gateway in order to have internet access.

Step 2: Modify the following configuration lines in DUT0:

set service snmp community COMMUNITY2TEST

Step 3: Run command service snmp getnext 10.215.168.64 oid SNMPv2-MIB::sysName version v1 community COMMUNITY2TEST at DUT0 and check if output contains the following tokens:

SNMPv2-MIB::sysName.0 = STRING: osdx

Test SNMP GetNext Request SNMPv2c

Description

SNMP GETNEXT operation with SNMPv2c

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces ethernet eth0 address 10.215.168.64/24
set protocols static route 0.0.0.0/0 next-hop 10.215.168.1
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Note

First configure an IP and gateway in order to have internet access.

Step 2: Modify the following configuration lines in DUT0:

set service snmp community COMMUNITY2TEST

Step 3: Run command service snmp getnext 10.215.168.64 oid SNMPv2-MIB::sysName version v2c community COMMUNITY2TEST at DUT0 and check if output contains the following tokens:

SNMPv2-MIB::sysName.0 = STRING: osdx

Test SNMP GetNext Request SNMPv3

Description

SNMP GETNEXT operation with SNMPv3

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces ethernet eth0 address 10.215.168.64/24
set protocols static route 0.0.0.0/0 next-hop 10.215.168.1
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Note

First configure an IP and gateway in order to have internet access.

Step 2: Modify the following configuration lines in DUT0:

set service snmp user USER2TEST authentication encrypted-password U2FsdGVkX185tQT0lfTbqw7hKipiFz6yaKLg9LmOy/U=
set service snmp user USER2TEST authentication protocol MD5
set service snmp user USER2TEST privacy encrypted-password U2FsdGVkX1/TTpC/2O/RwCB8R10Hdi6hzyBr4t7nO20=
set service snmp user USER2TEST privacy protocol AES

Step 3: Run command service snmp getnext 10.215.168.64 oid SNMPv2-MIB::sysName version v3 user USER2TEST auth-protocol MD5 auth-key PASSWORD priv-protocol AES priv-key PASSWORD security-level authPriv at DUT0 and check if output contains the following tokens:

SNMPv2-MIB::sysName.0 = STRING: osdx