Schedule

The following scenario shows how to configure alarm schedules to be able to program custom actions in the system triggered by a timer. Timers can be executed periodically or just once, depending on the configuration.

Periodic Schedule

Description

In this example, a schedule is configured in DUT0 to enable and disable an alarm every minute.

Scenario

Step 1: Set the following configuration in DUT0 :

set system alarm ALARM
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set system schedule SCHED alarm ALARM
set system schedule SCHED disable second 28
set system schedule SCHED enable second 23

Step 2: Run the command system schedule show on DUT0 and check whether the output matches the following regular expressions:

SCHED\s+(enable|disable).*left

Note

The output of the above command should show the “enable” and “disable” entries in the table with a “Left” value, since the schedule is pending.

Step 3: Run the command system alarm ALARM show on DUT0 and check whether the output contains the following tokens:

true

Step 4: Run the command system alarm ALARM show on DUT0 and check whether the output contains the following tokens:

false

Step 5: Run the command system schedule show on DUT0 and check whether the output matches the following regular expressions:

SCHED\s+(enable|disable).*left

Note

The output of the above command should show the “enable” and “disable” entries in the table with a “Left” value, since the schedule is periodic.

Schedule Script Execution

Description

In this example, a schedule is configured in DUT0 to program the execution of a script that automatically changes the system configuration.

Scenario

Step 1: Set the following configuration in DUT0 :

set system advisor ADVISOR1 test ALARM
set system advisor ADVISOR2 test 'not ALARM'
set system alarm ALARM
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set system schedule SCHED alarm ALARM
set system schedule SCHED disable day 3
set system schedule SCHED disable hour 11
set system schedule SCHED disable minute 2
set system schedule SCHED disable month 6
set system schedule SCHED disable second 49
set system schedule SCHED disable year 2026
set system schedule SCHED enable day 3
set system schedule SCHED enable hour 11
set system schedule SCHED enable minute 2
set system schedule SCHED enable month 6
set system schedule SCHED enable second 44
set system schedule SCHED enable year 2026
set system script SCRIPT1 advisor ADVISOR1
set system script SCRIPT1 configuration 'set system description \'Test Description\''
set system script SCRIPT2 advisor ADVISOR2
set system script SCRIPT2 configuration 'delete system description \'Test Description\''

Step 2: Run the command system alarm ALARM show on DUT0 and check whether the output contains the following tokens:

true

Note

The output of the above command should show that the alarm was activated according to the “enable” time configured.

Step 3: Run the command show version on DUT0 and check whether the output matches the following regular expressions:

Description:.*Test Description

Note

The output of the above command should show the system description configured by the script.

Step 4: Run the command system alarm ALARM show on DUT0 and check whether the output contains the following tokens:

false

Note

The output of the above command should show that the alarm was deactivated according to the “disable” time configured.

Step 5: Run the command system schedule show on DUT0 and check whether the output matches the following regular expressions:

SCHED\s+(enable|disable)\s+-\s+-\s+[a-zA-Z]{3}

Note

The output of the above command should show the “enable” and “disable” entries in the table without a “Next” or “Left” value, since the schedule is configured to be executed just once.

Step 6: Run the command show version on DUT0 and check whether the output does not match the following regular expressions:

Description:.*Test Description

Note

The output of the above command should show the script has removed the system description.