Static

These scenarios cover some aspects related to link-aggregation (combining multiple network connections simultaneously to increase throughput, provide redundancy, or both). In OSDx, this can be achieved through bonding interfaces.

../../../../../_images/topology1.svg

Test Static Adaptive Load Balance

Description

A bonding interface is configured in DUT0 using the adaptive load balance in static mode. This mode can be used to achieve load-balancing in transmission and reception. In this scenario, transmission load balancing is performed using a hash policy.

Scenario

Example 1

Step 1: Set the following configuration in DUT0 :

set interfaces bonding bond0 address 192.168.100.10/24
set interfaces bonding bond0 disable-dynamic-lb
set interfaces bonding bond0 hash-policy layer3+4
set interfaces bonding bond0 miimon 100
set interfaces bonding bond0 mode adaptive-load-balance
set interfaces ethernet eth0p0 bond-group bond0
set interfaces ethernet eth0p4 bond-group bond0
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces bridge br0 address 192.168.100.20/24
set interfaces bridge br0 stp version rstp
set interfaces ethernet eth1 bridge-group bridge br0
set interfaces ethernet eth2 bridge-group bridge br0
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run the command interfaces bonding show on DUT0 and check whether the output matches the following regular expressions:

bond0\s+192.168.100\.10\/24\s+up\s+up
Show output
---------------------------------------------------------------
Name          IP Address          Admin  Oper  Vrf  Description
---------------------------------------------------------------
bond0  192.168.100.10/24          up     up
fe80::2a0:26ff:fe18:c9/64

Step 4: Run the command interfaces bonding bond0 show ports on DUT0 and check whether the output contains the following tokens:

Bonding Mode: adaptive load balancing
Show output
Ethernet Channel Bonding Driver: v6.12.49

Bonding Mode: adaptive load balancing
Transmit Hash Policy: layer3+4 (1)
Primary Slave: None
Currently Active Slave: eth0p4
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
Peer Notification Delay (ms): 0

Slave Interface: eth0p0
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:a0:26:18:00:c9
Slave queue ID: 0

Slave Interface: eth0p4
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 02:a0:26:18:00:cc
Slave queue ID: 0

Step 5: Ping the IP address 192.168.100.20 from DUT0:

admin@DUT0$ ping 192.168.100.20 count 1 size 56 timeout 1
Show output
PING 192.168.100.20 (192.168.100.20) 56(84) bytes of data.
64 bytes from 192.168.100.20: icmp_seq=1 ttl=64 time=363 ms

--- 192.168.100.20 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 363.359/363.359/363.359/0.000 ms

Step 6: Run the command interfaces bonding bond0 show ports on DUT0 and check whether the output contains the following tokens:

Transmit Hash Policy: layer3+4 (1)
Show output
Ethernet Channel Bonding Driver: v6.12.49

Bonding Mode: adaptive load balancing
Transmit Hash Policy: layer3+4 (1)
Primary Slave: None
Currently Active Slave: eth0p4
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
Peer Notification Delay (ms): 0

Slave Interface: eth0p0
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:a0:26:18:00:c9
Slave queue ID: 0

Slave Interface: eth0p4
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 02:a0:26:18:00:cc
Slave queue ID: 0

Step 7: Run the command interfaces ethernet clear on DUT0.

Step 8: Initiate a bandwidth test from DUT0 to DUT1

admin@DUT1$ monitor test performance server port 5001
admin@DUT0$ monitor test performance client 192.168.100.20 duration 5 port 5001 parallel 10
Expect the following output on DUT0:
Connecting to host 192.168.100.20, port 5001
[  5] local 192.168.100.10 port 59266 connected to 192.168.100.20 port 5001
[  7] local 192.168.100.10 port 59274 connected to 192.168.100.20 port 5001
[  9] local 192.168.100.10 port 59276 connected to 192.168.100.20 port 5001
[ 11] local 192.168.100.10 port 59288 connected to 192.168.100.20 port 5001
[ 13] local 192.168.100.10 port 59296 connected to 192.168.100.20 port 5001
[ 15] local 192.168.100.10 port 59308 connected to 192.168.100.20 port 5001
[ 17] local 192.168.100.10 port 59314 connected to 192.168.100.20 port 5001
[ 19] local 192.168.100.10 port 59322 connected to 192.168.100.20 port 5001
[ 21] local 192.168.100.10 port 59336 connected to 192.168.100.20 port 5001
[ 23] local 192.168.100.10 port 59340 connected to 192.168.100.20 port 5001
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  14.3 MBytes   120 Mbits/sec   40   53.7 KBytes
[  7]   0.00-1.00   sec  15.4 MBytes   129 Mbits/sec   14   74.9 KBytes
[  9]   0.00-1.00   sec  10.8 MBytes  90.6 Mbits/sec   30   53.7 KBytes
[ 11]   0.00-1.00   sec  10.8 MBytes  90.9 Mbits/sec   23   76.4 KBytes
[ 13]   0.00-1.00   sec  10.3 MBytes  86.0 Mbits/sec   21   49.5 KBytes
[ 15]   0.00-1.00   sec  8.05 MBytes  67.5 Mbits/sec   26   41.0 KBytes
[ 17]   0.00-1.00   sec  10.5 MBytes  88.0 Mbits/sec   33   55.1 KBytes
[ 19]   0.00-1.00   sec  10.9 MBytes  91.8 Mbits/sec   14   77.8 KBytes
[ 21]   0.00-1.00   sec  16.6 MBytes   140 Mbits/sec   23   60.8 KBytes
[ 23]   0.00-1.00   sec  8.31 MBytes  69.7 Mbits/sec   25   32.5 KBytes
[SUM]   0.00-1.00   sec   116 MBytes   973 Mbits/sec  249
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.00-2.00   sec  10.1 MBytes  84.4 Mbits/sec   28   60.8 KBytes
[  7]   1.00-2.00   sec  15.3 MBytes   129 Mbits/sec   27   45.2 KBytes
[  9]   1.00-2.00   sec  9.88 MBytes  82.9 Mbits/sec   27   56.6 KBytes
[ 11]   1.00-2.00   sec  11.2 MBytes  94.4 Mbits/sec   36   41.0 KBytes
[ 13]   1.00-2.00   sec  8.26 MBytes  69.3 Mbits/sec   31   59.4 KBytes
[ 15]   1.00-2.00   sec  10.8 MBytes  90.7 Mbits/sec   35   42.4 KBytes
[ 17]   1.00-2.00   sec  11.6 MBytes  97.5 Mbits/sec   22   67.9 KBytes
[ 19]   1.00-2.00   sec  12.9 MBytes   108 Mbits/sec   25   46.7 KBytes
[ 21]   1.00-2.00   sec  11.2 MBytes  93.8 Mbits/sec   40   32.5 KBytes
[ 23]   1.00-2.00   sec  11.4 MBytes  95.9 Mbits/sec   13   73.5 KBytes
[SUM]   1.00-2.00   sec   113 MBytes   946 Mbits/sec  284
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.00-3.00   sec  13.4 MBytes   112 Mbits/sec   22   46.7 KBytes
[  7]   2.00-3.00   sec  12.2 MBytes   102 Mbits/sec   15   31.1 KBytes
[  9]   2.00-3.00   sec  11.7 MBytes  98.0 Mbits/sec   19   58.0 KBytes
[ 11]   2.00-3.00   sec  9.57 MBytes  80.3 Mbits/sec   28   43.8 KBytes
[ 13]   2.00-3.00   sec  10.8 MBytes  90.7 Mbits/sec   16   31.1 KBytes
[ 15]   2.00-3.00   sec  11.7 MBytes  98.5 Mbits/sec   24   73.5 KBytes
[ 17]   2.00-3.00   sec  12.5 MBytes   105 Mbits/sec   20   60.8 KBytes
[ 19]   2.00-3.00   sec  12.3 MBytes   103 Mbits/sec    7   65.0 KBytes
[ 21]   2.00-3.00   sec  9.32 MBytes  78.2 Mbits/sec   19   46.7 KBytes
[ 23]   2.00-3.00   sec  8.39 MBytes  70.4 Mbits/sec   32   21.2 KBytes
[SUM]   2.00-3.00   sec   112 MBytes   938 Mbits/sec  202
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.00-4.00   sec  10.4 MBytes  87.6 Mbits/sec   24   45.2 KBytes
[  7]   3.00-4.00   sec  13.4 MBytes   112 Mbits/sec   14   89.1 KBytes
[  9]   3.00-4.00   sec  10.7 MBytes  89.7 Mbits/sec   30   53.7 KBytes
[ 11]   3.00-4.00   sec  11.5 MBytes  96.4 Mbits/sec   26   59.4 KBytes
[ 13]   3.00-4.00   sec  7.83 MBytes  65.7 Mbits/sec   25   67.9 KBytes
[ 15]   3.00-4.00   sec  13.1 MBytes   110 Mbits/sec   28   76.4 KBytes
[ 17]   3.00-4.00   sec  13.4 MBytes   113 Mbits/sec   23   55.1 KBytes
[ 19]   3.00-4.00   sec  10.3 MBytes  86.0 Mbits/sec   31   41.0 KBytes
[ 21]   3.00-4.00   sec  13.9 MBytes   117 Mbits/sec   34   67.9 KBytes
[ 23]   3.00-4.00   sec  7.52 MBytes  63.1 Mbits/sec   34   56.6 KBytes
[SUM]   3.00-4.00   sec   112 MBytes   940 Mbits/sec  269
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.00-5.00   sec  10.1 MBytes  85.0 Mbits/sec   21   62.2 KBytes
[  7]   4.00-5.00   sec  13.6 MBytes   114 Mbits/sec   23   41.0 KBytes
[  9]   4.00-5.00   sec  7.27 MBytes  61.0 Mbits/sec   42   43.8 KBytes
[ 11]   4.00-5.00   sec  12.7 MBytes   107 Mbits/sec   17   72.1 KBytes
[ 13]   4.00-5.00   sec  10.0 MBytes  83.9 Mbits/sec   51   38.2 KBytes
[ 15]   4.00-5.00   sec  10.9 MBytes  91.2 Mbits/sec   36   26.9 KBytes
[ 17]   4.00-5.00   sec  11.7 MBytes  98.5 Mbits/sec   38   26.9 KBytes
[ 19]   4.00-5.00   sec  13.9 MBytes   117 Mbits/sec   14   48.1 KBytes
[ 21]   4.00-5.00   sec  11.6 MBytes  97.0 Mbits/sec   39   45.2 KBytes
[ 23]   4.00-5.00   sec  10.0 MBytes  83.9 Mbits/sec   37   32.5 KBytes
[SUM]   4.00-5.00   sec   112 MBytes   938 Mbits/sec  318
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-5.00   sec  58.3 MBytes  97.7 Mbits/sec  135             sender
[  5]   0.00-5.01   sec  57.8 MBytes  96.8 Mbits/sec                  receiver
[  7]   0.00-5.00   sec  69.9 MBytes   117 Mbits/sec   93             sender
[  7]   0.00-5.01   sec  69.2 MBytes   116 Mbits/sec                  receiver
[  9]   0.00-5.00   sec  50.3 MBytes  84.4 Mbits/sec  148             sender
[  9]   0.00-5.01   sec  49.9 MBytes  83.6 Mbits/sec                  receiver
[ 11]   0.00-5.00   sec  55.9 MBytes  93.8 Mbits/sec  130             sender
[ 11]   0.00-5.01   sec  55.3 MBytes  92.7 Mbits/sec                  receiver
[ 13]   0.00-5.00   sec  47.2 MBytes  79.1 Mbits/sec  144             sender
[ 13]   0.00-5.01   sec  46.7 MBytes  78.2 Mbits/sec                  receiver
[ 15]   0.00-5.00   sec  54.6 MBytes  91.6 Mbits/sec  149             sender
[ 15]   0.00-5.01   sec  54.1 MBytes  90.6 Mbits/sec                  receiver
[ 17]   0.00-5.00   sec  59.8 MBytes   100 Mbits/sec  136             sender
[ 17]   0.00-5.01   sec  59.2 MBytes  99.2 Mbits/sec                  receiver
[ 19]   0.00-5.00   sec  60.3 MBytes   101 Mbits/sec   91             sender
[ 19]   0.00-5.01   sec  59.8 MBytes   100 Mbits/sec                  receiver
[ 21]   0.00-5.00   sec  62.6 MBytes   105 Mbits/sec  155             sender
[ 21]   0.00-5.01   sec  61.9 MBytes   104 Mbits/sec                  receiver
[ 23]   0.00-5.00   sec  45.7 MBytes  76.6 Mbits/sec  141             sender
[ 23]   0.00-5.01   sec  45.2 MBytes  75.8 Mbits/sec                  receiver
[SUM]   0.00-5.00   sec   564 MBytes   947 Mbits/sec  1322             sender
[SUM]   0.00-5.01   sec   559 MBytes   937 Mbits/sec                  receiver

iperf Done.

Step 9: Run the command interfaces ethernet show counters on DUT0 and check whether the output matches the following regular expressions:

eth0p0 \s+up\s+\d+\s+\d+\s+0\s+\d{4,}
eth0p4 \s+up\s+\d+\s+\d+\s+0\s+\d{4,}
Show output
-------------------------------------------------------------------------------
Name   Oper  Rx Packets  Rx Bytes  Rx Errors  Tx Packets  Tx Bytes   Tx Errors
-------------------------------------------------------------------------------
eth0p0  up        103932   6916140          0      178733  270556082          0
eth0p1  down           0         0          0           0          0          0
eth0p2  down           0         0          0           0          0          0
eth0p3  down           0         0          0           0          0          0
eth0p4  up         38325   2558932          0      227788  344804124          0
eth0p5  down           0         0          0           0          0          0
eth0p6  down           0         0          0           0          0          0
eth0p7  down           0         0          0           0          0          0
eth1  down           0         0          0           0          0          0
eth2  down           0         0          0           0          0          0