Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run the command file show running://log/user/audit_file/audit_file on DUT0 and check whether the output contains the following tokens:

Secure mode started

Step 2: Run the command show running on DUT0 and expect the following output:

Step 3: Run the command file show running://log/user/audit_file/audit_file on DUT0 and check whether the output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$.Y.UrR/IYh5i0kjm$nzLUw2J75l/TWh09V5.tKIXfto.sCURMslGPtsSEQQOfcGhvG5vgvjnAXc8hH5vtaUFY8dUmI9IveGN9DiQjC1'
set system security medium

Step 5: Run the command file show running://log/user/audit_file/audit_file on DUT0 and check whether the output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX19Xvzq2uW5LoTfp0saPMCfRNH8KbjhV/NY=
set system login user admin authentication encrypted-password '$6$eMGpp6tSo7A0ezlJ$d2OoFSARxjGr7PgD13sWCILHg.ZXwNeBBK/2QtGycZNQg1U4OXy1ONxblcdGExGcMu9w1.bha3RDtEdia1ZqT0'
set system security medium

Step 2: Run the command file show running://log/user/audit_file/audit_file on DUT0 and check whether the output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$gNI8KH98e7w163c3$vGvXmCyox.HD7LR92x/TYNMAo4lbAP/1RxGjcvEU2CYc9j5/SwIWF3ss5/HD2JuKSAlbzjcr2sncGypURgvpu0'
set system login user test authentication encrypted-password '$6$ZBp9nNXfy8qIOZ4d$mkXRI.TUAv545eqS0yPo3k1ob2C9YCb/1IHuuSIeG390/98e1v6oEVczUOEbxGD8TMWf9xkbZv6q01kfLogUU1'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq:

test@osdx

Note

After a security level change, the device requires re-authentication with credentials that comply with the new security policy.

Step 3: Run the command file show running://log/user/audit_file/audit_file on DUT0 and check whether the output contains the following tokens:

Permission denied