Policy

Tests for LWDRR classification using traffic policies. Verifies that rate shaping works with policy-based classification and that assigning traffic to a non-leaf parent class causes it to fall to the default class.

Test LWDRR Policy Rate TCP 8080

Description

Configures a two-level LWDRR hierarchy with traffic policy pre-classification and verifies that TCP traffic on port 8080 is shaped to ~30 Mbps by class 11 (child of class 10).

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.2/24
set interfaces ethernet eth0 traffic control out QDISC
set interfaces ethernet eth0 traffic policy out CLASSIFIER
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set traffic control QDISC type lwdrr bandwidth 100
set traffic control QDISC type lwdrr class 10 bandwidth percentage 50
set traffic control QDISC type lwdrr class 10 weight 100
set traffic control QDISC type lwdrr class 11 bandwidth rate 30
set traffic control QDISC type lwdrr class 11 parent 10
set traffic control QDISC type lwdrr class 11 weight 60
set traffic control QDISC type lwdrr class 12 bandwidth percentage 10
set traffic control QDISC type lwdrr class 12 weight 50
set traffic control QDISC type lwdrr default-class 12
set traffic policy CLASSIFIER rule 1 selector SEL_TCP_8080
set traffic policy CLASSIFIER rule 1 set class 11
set traffic selector SEL_TCP_8080 rule 1 destination port 8080
set traffic selector SEL_TCP_8080 rule 1 protocol tcp

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address 10.0.0.1/24
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Ping the IP address 10.0.0.1 from DUT0:

admin@DUT0$ ping 10.0.0.1 count 1 size 56 timeout 1

Step 4: Initiate a bandwidth test from DUT0 to DUT1

admin@DUT1$ monitor test performance server port 8080
admin@DUT0$ monitor test performance client 10.0.0.1 duration 5 port 8080 parallel 1

Step 5: Run the command traffic control show on DUT0 and check whether the output matches the following regular expressions:

class 11\s+1:10\s+[1-9]

Test LWDRR Policy Assigns To Parent Class