Pppoe
Test to check PPPoE interface.
Test PAP Authentication
Description
Checks PPPoE interface with PAP authentication.
Scenario
Note
Configure PPPoE server with PAP authentication
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX18047K5i3jfQLT59S0OfAyBid8/XKVVzk8= set interfaces pppoe pppoe0 base-interface ethernet eth0 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
------------------------------------------------------- Name IP Address Admin Oper Vrf Description ------------------------------------------------------- pppoe0 192.168.100.2/32 up up
Test CHAP Authentication
Description
Checks PPPoE interface with CHAP authentication.
Scenario
Note
Configure PPPoE server with CHAP authentication
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces pppoe pppoe0 authentication protocol chap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX19Z/fi4KEMZAizO1jTUQk3lzEND3PIvaIU= set interfaces pppoe pppoe0 base-interface ethernet eth0 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
------------------------------------------------------- Name IP Address Admin Oper Vrf Description ------------------------------------------------------- pppoe0 192.168.100.2/32 up up
Test Local Address
Description
Checks PPPoE interface with a configured local IPv4 address.
Scenario
Note
Configure PPPoE server
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX1/KhyOPDiZ524YZaYh9ris8tK+YeDcKTq8= set interfaces pppoe pppoe0 base-interface ethernet eth0 set interfaces pppoe pppoe0 local-address 192.168.100.100 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
192.168.100.100Show output
--------------------------------------------------------- Name IP Address Admin Oper Vrf Description --------------------------------------------------------- pppoe0 192.168.100.100/32 up up
Step 3: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
--------------------------------------------------------- Name IP Address Admin Oper Vrf Description --------------------------------------------------------- pppoe0 192.168.100.100/32 up up
Note
Connectivity verification is not performed as the interface lacks IPv4 addressing and the IPv6 address is only an identifier
Test Local Identifier
Description
Checks PPPoE interface with a configured local IPv6 identifier.
Scenario
Note
Configure PPPoE server
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX19TsJSIyqDvc7zT93p3ITcWU/+uZvpIaoc= set interfaces pppoe pppoe0 base-interface ethernet eth0 set interfaces pppoe pppoe0 local-identifier '::100' set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
::100Show output
------------------------------------------------------- Name IP Address Admin Oper Vrf Description ------------------------------------------------------- pppoe0 192.168.100.2/32 up up fe80::100/128
Step 3: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
------------------------------------------------------- Name IP Address Admin Oper Vrf Description ------------------------------------------------------- pppoe0 192.168.100.2/32 up up fe80::100/128
Test Ethernet VIF Interface
Description
Checks PPPoE interface with an Ethernet VIF interface as the base interface.
Scenario
Note
Configure PPPoE server with VLAN 100 support
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth0 vif 100 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX18YW5E/9F0XzOch5nHb+eXRxojbGpNSBLg= set interfaces pppoe pppoe0 base-interface ethernet eth0 vif 100 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
------------------------------------------------------------------ Name IP Address Admin Oper Vrf Description ------------------------------------------------------------------ pppoe0 192.168.100.2/32 up up fe80::9f2:199:2de8:d70f/128
Test Bridge Interface
Description
Checks PPPoE interface with a Bridge interface as the base interface.
Scenario
Note
Configure PPPoE server
Step 1: Set the following configuration in DUT0 :
set interfaces bridge br0 set interfaces ethernet eth0 bridge-group bridge br0 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX1+tlH74m98nh3yRjjQ9ttZEIHhUzUTl/yI= set interfaces pppoe pppoe0 base-interface bridge br0 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
------------------------------------------------------------------- Name IP Address Admin Oper Vrf Description ------------------------------------------------------------------- pppoe0 192.168.100.2/32 up up fe80::ccd8:d8be:e28:49d3/128
Test Bridge VIF Interface
Description
Checks PPPoE interface with a Bridge VIF interface as the base interface.
Scenario
Note
Configure PPPoE server with VLAN 100 support
Step 1: Set the following configuration in DUT0 :
set interfaces bridge br0 vif 100 set interfaces bridge br0 vlan 100 set interfaces ethernet eth0 bridge-group bridge br0 set interfaces ethernet eth0 bridge-group vlan 100 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX1/m6QqwVqQHsqCy9+LBNodu0t6GEFKtkCM= set interfaces pppoe pppoe0 base-interface bridge br0 vif 100 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
-------------------------------------------------------------------- Name IP Address Admin Oper Vrf Description -------------------------------------------------------------------- pppoe0 192.168.100.2/32 up up fe80::3cfb:a423:e4a4:8a46/128
Test Access Concentrator
Description
Checks PPPoE interface with an access concentrator. An access concentrator is a device that aggregates PPPoE sessions from multiple clients.
Scenario
Note
Configure PPPoE server with an access concentrator.
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces pppoe pppoe0 access-concentrator myac set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX18pz4b+u+1Qp64xPUhfVu9iaVz3qPufRSs= set interfaces pppoe pppoe0 base-interface ethernet eth0 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
------------------------------------------------------------------- Name IP Address Admin Oper Vrf Description ------------------------------------------------------------------- pppoe0 192.168.100.2/32 up up fe80::41e2:f79:df4c:13bd/128
Test PPPoE With Tunnel Interface
Description
Checks PPPoE interface with GRE tunnel configured over PPPoE. This test verifies that a GRE tunnel can be established using the PPPoE interface as the local interface.
Scenario
Note
Configure PPPoE server with PAP authentication
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX18Zuq5BToNAsK7LmYgmGBCPJqOEoheDzrk= set interfaces pppoe pppoe0 base-interface ethernet eth0 set interfaces pppoe pppoe0 local-address 192.168.100.100 set interfaces tunnel tun0 address 10.10.10.200/24 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 ppp-interface pppoe0 set interfaces tunnel tun0 remote-address 192.168.100.1 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set system offload disable
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
------------------------------------------------------------------- Name IP Address Admin Oper Vrf Description ------------------------------------------------------------------- pppoe0 192.168.100.100/32 up up fe80::dbc:75cf:bb50:2eb8/128
Note
Verify tunnel interface configuration
Step 3: Run the command interfaces tunnel tun0 show detailed on DUT0 and check whether the output contains the following tokens:
10.10.10.200Show output
-------------------------------------------------------------------------------------------------------- Name Idx IP Address Admin Oper Link MTU Vrf Upper Lower Type Phys addr -------------------------------------------------------------------------------------------------------- tun0 82 10.10.10.200/24 up up up 1468 pppoe0 tunnel 192.168.100.100 fe80::5efe:c0a8:6464/64
Step 4: Run the command interfaces tunnel tun0 show detailed on DUT0 and check whether the output contains the following tokens:
upShow output
-------------------------------------------------------------------------------------------------------- Name Idx IP Address Admin Oper Link MTU Vrf Upper Lower Type Phys addr -------------------------------------------------------------------------------------------------------- tun0 82 10.10.10.200/24 up up up 1468 pppoe0 tunnel 192.168.100.100 fe80::5efe:c0a8:6464/64
Test PPPoE With DNS Forwarding
Description
Checks PPPoE interface with DNS forwarding service configured. This test verifies that DNS forwarding can be enabled on the PPPoE interface and properly resolves DNS queries.
Scenario
Note
Configure PPPoE server with PAP authentication and DNS server
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX1/hQ7JpnTx8X7UB/6Cv7ul4eMuzPJ6O/CI= set interfaces pppoe pppoe0 base-interface ethernet eth0 set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set service dns forwarding ppp interface pppoe0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
-------------------------------------------------------------------- Name IP Address Admin Oper Vrf Description -------------------------------------------------------------------- pppoe0 192.168.100.3/32 up up fe80::a5ac:3d71:7351:98d8/128
Note
Google IP is 8.8.8.8
Step 3: Ping the IP address 8.8.8.8 from DUT0:
admin@DUT0$ ping 8.8.8.8 count 1 size 56 timeout 1Show output
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=110 time=5.60 ms --- 8.8.8.8 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 5.600/5.600/5.600/0.000 ms
Test Events
Description
Checks that PPPoE negotiation events are visible in the system journal when logging is enabled. This test verifies that PPPoE appear in the journal.
Scenario
Note
Configure PPPoE server with PAP authentication
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces pppoe pppoe0 authentication protocol pap set interfaces pppoe pppoe0 authentication user myuser encrypted-password U2FsdGVkX181m/ftA38DWgH2zkEZNF7SRknv8p4gZzU= set interfaces pppoe pppoe0 base-interface ethernet eth0 set interfaces pppoe pppoe0 logging detailed set protocols static route 0.0.0.0/0 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Run the command interfaces pppoe pppoe0 show on DUT0 and check whether the output contains the following tokens:
upShow output
------------------------------------------------------------------- Name IP Address Admin Oper Vrf Description ------------------------------------------------------------------- pppoe0 192.168.100.2/32 up up fe80::e5c3:657:b3b7:1a49/128
Step 3: Run the command system journal show | grep ppd on DUT0 and check whether the output contains the following tokens:
osdx pppdShow output
Sep 16 13:53:47.845455 osdx pppd[27804]: Plugin rp-pppoe.so loaded. Sep 16 13:53:47.906983 osdx pppd[27805]: pppd 2.4.9 started by root, uid 0 Sep 16 13:53:47.908267 osdx pppd[27805]: Renamed interface ppp0 to pppoe0 Sep 16 13:53:47.908275 osdx pppd[27805]: Using interface pppoe0 Sep 16 13:53:47.926414 osdx pppd[27805]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12 Sep 16 13:53:47.926421 osdx pppd[27805]: dst ff:ff:ff:ff:ff:ff src de:ad:be:ef:6c:00 Sep 16 13:53:47.926427 osdx pppd[27805]: [service-name] [host-uniq 9d 6c 00 00] Sep 16 13:53:47.926613 osdx pppd[27805]: Recv PPPOE Discovery V1T1 PADO session 0x0 length 57 Sep 16 13:53:47.926620 osdx pppd[27805]: dst de:ad:be:ef:6c:00 src fe:85:ac:81:55:1e Sep 16 13:53:47.926625 osdx pppd[27805]: [AC-name osdx-tests-prod-1] [service-name] [AC-cookie e3 e9 c8 37 f4 8f 4e 4e dd 7f 7d 97 75 04 66 b6 14 13 00 00] [host-uniq 9d 6c 00 00] Sep 16 13:53:47.926629 osdx pppd[27805]: Send PPPOE Discovery V1T1 PADR session 0x0 length 36 Sep 16 13:53:47.926632 osdx pppd[27805]: dst fe:85:ac:81:55:1e src de:ad:be:ef:6c:00 Sep 16 13:53:47.926635 osdx pppd[27805]: [service-name] [host-uniq 9d 6c 00 00] [AC-cookie e3 e9 c8 37 f4 8f 4e 4e dd 7f 7d 97 75 04 66 b6 14 13 00 00] Sep 16 13:53:47.926850 osdx pppd[27805]: Recv PPPOE Discovery V1T1 PADS session 0x1 length 12 Sep 16 13:53:47.926856 osdx pppd[27805]: dst de:ad:be:ef:6c:00 src fe:85:ac:81:55:1e Sep 16 13:53:47.926859 osdx pppd[27805]: [service-name] [host-uniq 9d 6c 00 00] Sep 16 13:53:47.926862 osdx pppd[27805]: PADS: Service-Name: '' Sep 16 13:53:47.926864 osdx pppd[27805]: PPP session is 1 Sep 16 13:53:47.954387 osdx pppd[27805]: Connected to fe:85:ac:81:55:1e via interface eth0 Sep 16 13:53:47.954424 osdx pppd[27805]: using channel 12 Sep 16 13:53:47.954440 osdx pppd[27805]: Connect: pppoe0 <--> eth0 Sep 16 13:53:47.954452 osdx pppd[27805]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x9cb4dec0>] Sep 16 13:53:47.954663 osdx pppd[27805]: rcvd [LCP ConfReq id=0x1 <mru 1492> <auth pap> <magic 0x1d9956d8>] Sep 16 13:53:47.954670 osdx pppd[27805]: sent [LCP ConfAck id=0x1 <mru 1492> <auth pap> <magic 0x1d9956d8>] Sep 16 13:53:47.954686 osdx pppd[27805]: rcvd [LCP ConfAck id=0x1 <mru 1492> <magic 0x9cb4dec0>] Sep 16 13:53:47.954739 osdx pppd[27805]: sent [LCP EchoReq id=0x0 magic=0x9cb4dec0] Sep 16 13:53:47.954752 osdx pppd[27805]: sent [PAP AuthReq id=0x1 user="myuser" password=<hidden>] Sep 16 13:53:47.954843 osdx pppd[27805]: rcvd [LCP EchoReq id=0x0 magic=0x1d9956d8] Sep 16 13:53:47.954849 osdx pppd[27805]: sent [LCP EchoRep id=0x0 magic=0x9cb4dec0] Sep 16 13:53:47.954863 osdx pppd[27805]: rcvd [LCP EchoRep id=0x0 magic=0x1d9956d8] Sep 16 13:53:47.954870 osdx pppd[27805]: rcvd [PAP AuthAck id=0x1 "Login ok"] Sep 16 13:53:47.954873 osdx pppd[27805]: Remote message: Login ok Sep 16 13:53:47.954875 osdx pppd[27805]: PAP authentication succeeded Sep 16 13:53:47.954878 osdx pppd[27805]: peer from calling number FE:85:AC:81:55:1E authorized Sep 16 13:53:47.954885 osdx pppd[27805]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>] Sep 16 13:53:47.954896 osdx pppd[27805]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e5c3:0657:b3b7:1a49>] Sep 16 13:53:47.954994 osdx pppd[27805]: rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] Sep 16 13:53:47.954997 osdx pppd[27805]: sent [CCP ConfReq id=0x1] Sep 16 13:53:47.955004 osdx pppd[27805]: sent [CCP ConfRej id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] Sep 16 13:53:47.955012 osdx pppd[27805]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 192.168.100.1>] Sep 16 13:53:47.955015 osdx pppd[27805]: sent [IPCP ConfRej id=0x1 <compress VJ 0f 01>] Sep 16 13:53:47.955028 osdx pppd[27805]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::1d76:5302:8be9:80fc>] Sep 16 13:53:47.955032 osdx pppd[27805]: sent [IPV6CP ConfAck id=0x1 <addr fe80::1d76:5302:8be9:80fc>] Sep 16 13:53:47.955043 osdx pppd[27805]: rcvd [IPCP ConfNak id=0x1 <addr 192.168.100.2>] Sep 16 13:53:47.955047 osdx pppd[27805]: sent [IPCP ConfReq id=0x2 <addr 192.168.100.2>] Sep 16 13:53:47.955057 osdx pppd[27805]: rcvd [IPV6CP ConfAck id=0x1 <addr fe80::e5c3:0657:b3b7:1a49>] Sep 16 13:53:47.955176 osdx pppd[27805]: local LL address fe80::e5c3:0657:b3b7:1a49 Sep 16 13:53:47.955179 osdx pppd[27805]: remote LL address fe80::1d76:5302:8be9:80fc Sep 16 13:53:47.955523 osdx pppd[27805]: Script /etc/ppp/ipv6-up started (pid 27854) Sep 16 13:53:47.955545 osdx pppd[27805]: rcvd [CCP ConfAck id=0x1] Sep 16 13:53:47.955555 osdx pppd[27805]: rcvd [CCP ConfReq id=0x2] Sep 16 13:53:47.955557 osdx pppd[27805]: sent [CCP ConfAck id=0x2] Sep 16 13:53:47.955572 osdx pppd[27805]: rcvd [IPCP ConfReq id=0x2 <addr 192.168.100.1>] Sep 16 13:53:47.955575 osdx pppd[27805]: sent [IPCP ConfAck id=0x2 <addr 192.168.100.1>] Sep 16 13:53:47.955698 osdx pppd[27805]: rcvd [IPCP ConfAck id=0x2 <addr 192.168.100.2>] Sep 16 13:53:47.956667 osdx pppd[27805]: Script /etc/ppp/ip-pre-up started (pid 27855) Sep 16 13:53:47.958618 osdx pppd[27805]: Script /etc/ppp/ip-pre-up finished (pid 27855), status = 0x0 Sep 16 13:53:47.958645 osdx pppd[27805]: local IP address 192.168.100.2 Sep 16 13:53:47.958648 osdx pppd[27805]: remote IP address 192.168.100.1 Sep 16 13:53:47.958861 osdx pppd[27805]: Script /etc/ppp/ip-up started (pid 27862) Sep 16 13:53:47.958885 osdx pppd[27805]: Script /etc/ppp/ipv6-up finished (pid 27854), status = 0x0 Sep 16 13:53:48.124561 osdx pppd[27805]: Script /etc/ppp/ip-up finished (pid 27862), status = 0x0