set
- service snmp set <ipv4>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
SNMP agent IP
- Values:
ipv4 – SNMP agent IP
- Options:
- priv-protocol <txt>
Privacy (encryption) protocol
- Values:
txt – Privacy (encryption) protocol (AES by default)
- version <txt>
Specify SNMP version to use [REQUIRED]
- Values:
txt – SNMP version to use [REQUIRED]
- value <txt>
Value to set [REQUIRED]
- Values:
txt – Value to set [REQUIRED]
- priv-key <txt>
Privacy key
- Values:
txt – Privacy key
- context-engine-id <txt>
Context engine ID used for SNMPv3 request messages.
- Values:
txt – Context engine ID used for SNMPv3 request messages.
- community <txt>
Community name (Required for SNMP v1 and v2c)
- Values:
txt – Community name (Required for SNMP v1 and v2c)
- oid <txt>
OID to use [REQUIRED]
- Values:
txt – OID to use [REQUIRED]
- user <txt>
User name (Required for SNMP v3)
- Values:
txt – User name (Required for SNMP v3)
- value-type <txt>
Type of the value to set [REQUIRED]
- Values:
txt – Type of the value to set [REQUIRED]
- auth-key <txt>
Authentication key
- Values:
txt – Authentication key
- security-level <txt>
Security-level to use, only for SNMP v3 (noAuthNoPriv by default)
- Values:
txt – Security-level to use, only for SNMP v3 (noAuthNoPriv by default)
- auth-engine-id <txt>
Authoritative (security) engine ID used for SNMPv3 request messages.
- Values:
txt – Authoritative (security) engine ID used for SNMPv3 request messages.
- auth-protocol <txt>
Authentication protocol (MD5 by default)
- Values:
txt – Authentication protocol (MD5 by default)