Reauth
This scenario shows how to enable the re-authentication mechanism in an 802.1x authenticator.
Test 802.1x Authenticator Initiate
Description
DUT1 is configured to perform authentication. However, DUT0 does not initially require the use of 802.1x. Afterwards, the port in DUT0 is reconfigured with 802.1x reauthentication.
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth1 802.1x authenticator aaa authentication list1 set interfaces ethernet eth1 802.1x authenticator reauth-period 15 set interfaces ethernet eth1 address 192.168.100.1/24 set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 encrypted-key U2FsdGVkX18ZSXs+xX2DnH7fcDONEqLDIQhpN9esJuq0tpPJ5CTiGZJhhBbXg+oma9+sfE+PVGO+3d+LCdeNZA== set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 3: Ping IP address 10.215.168.1 from DUT0:
admin@DUT0$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.193 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.193/0.193/0.193/0.000 ms
Step 4: Set the following configuration in DUT1 :
set interfaces ethernet eth1 802.1x supplicant encrypted-password U2FsdGVkX18+XAYsPh6+NRFvsOLkofXp9+PzB1QuWXw= set interfaces ethernet eth1 802.1x supplicant username testing set interfaces ethernet eth1 address 192.168.100.2/24 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 5: Run command interfaces ethernet eth1 802.1x supplicant show status at DUT1 and check if output contains the following tokens:
AuthorizedShow output
--------------------------------------------------- Field Value --------------------------------------------------- EAP State SUCCESS EAP TLS Cipher ECDHE-RSA-AES256-GCM-SHA384 EAP TLS Version TLSv1.2 PAE State AUTHENTICATED Supplicant Port Status Authorized WPA State COMPLETED
Step 6: Run command interfaces ethernet eth1 802.1x supplicant show stats at DUT1 and check if output matches the following regular expressions:
Port Status\s+AuthorizedShow output
------------------------------- Field Value ------------------------------- EAPoL Frames (Rx) 11 EAPoL Frames (Tx) 11 Invalid Frames (Rx) 0 Logoff Frames (Tx) 0 Port Status Authorized Req Frames (Rx) 9 Req ID Frames (Rx) 1 Resp Frames (Tx) 10 Start Frames (Tx) 1
Step 7: Run command interfaces ethernet eth1 802.1x authenticator show stats at DUT0 and check if output matches the following regular expressions:
Authentication Successes\s+1Show output
--------------------------------- Field Value --------------------------------- Access Challenges 9 Authentication Backend RADIUS Authentication Failures 0 Authentication Successes 1 EAPoL frames (Rx) 11 EAPoL frames (Tx) 11 Reauthenticate TRUE Reauthenticate Period 15 Session Time 0 Session User Name testing
Step 8: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.324 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.324/0.324/0.324/0.000 ms
Test Re-Authentication
Description
DUT0 is configured with a 802.1x authenticated interface. DUT1 is successfully authenticated and can ping DUT0. DUT0 multicasts periodic EAP-Requests to ask DUT1 for reauthentication.
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth1 802.1x authenticator aaa authentication list1 set interfaces ethernet eth1 802.1x authenticator reauth-period 15 set interfaces ethernet eth1 address 192.168.100.1/24 set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 encrypted-key U2FsdGVkX19wM1Dom3GFNHLDVOZ17Rn3unqsXQbqZBFLNHkKHa3LzedCQvWyydP4q8WR4Y2ihHy6SN4qX+9o/g== set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Ping IP address 10.215.168.1 from DUT0:
admin@DUT0$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.144 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.144/0.144/0.144/0.000 ms
Step 3: Set the following configuration in DUT1 :
set interfaces ethernet eth1 802.1x supplicant encrypted-password U2FsdGVkX193YVK9ovw3o+2e3pREtmd2T66o27Rvtcs= set interfaces ethernet eth1 802.1x supplicant username testing set interfaces ethernet eth1 address 192.168.100.2/24 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 4: Run command interfaces ethernet eth1 802.1x supplicant show status at DUT1 and check if output contains the following tokens:
AuthorizedShow output
--------------------------------------------------- Field Value --------------------------------------------------- EAP State SUCCESS EAP TLS Cipher ECDHE-RSA-AES256-GCM-SHA384 EAP TLS Version TLSv1.2 PAE State AUTHENTICATED Supplicant Port Status Authorized WPA State COMPLETED
Step 5: Run command interfaces ethernet eth1 802.1x supplicant show stats at DUT1 and check if output matches the following regular expressions:
Port Status\s+AuthorizedShow output
------------------------------- Field Value ------------------------------- EAPoL Frames (Rx) 11 EAPoL Frames (Tx) 11 Invalid Frames (Rx) 0 Logoff Frames (Tx) 0 Port Status Authorized Req Frames (Rx) 9 Req ID Frames (Rx) 1 Resp Frames (Tx) 10 Start Frames (Tx) 1
Step 6: Run command interfaces ethernet eth1 802.1x authenticator show stats at DUT0 and check if output matches the following regular expressions:
Authentication Successes\s+1Show output
--------------------------------- Field Value --------------------------------- Access Challenges 9 Authentication Backend RADIUS Authentication Failures 0 Authentication Successes 1 EAPoL frames (Rx) 11 EAPoL frames (Tx) 11 Reauthenticate TRUE Reauthenticate Period 15 Session Time 0 Session User Name testing
Step 7: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.289 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.289/0.289/0.289/0.000 ms
Note
Initial authentication should be successful.
Step 8: Run command interfaces ethernet eth1 802.1x authenticator show status at DUT0 and check if output contains the following tokens:
Current status: AuthorizedShow output
Current status: Authorized
Note
Disassociate remote host. DUT0 should start sending EAP-Request frames.
Step 9: Run command interfaces ethernet eth1 802.1x authenticator disassociate at DUT0 and expect this output:
Show output
OK
Step 10: Run command interfaces ethernet eth1 802.1x authenticator show status at DUT0 and check if output contains the following tokens:
Current status: UnauthorizedShow output
Current status: Unauthorized
Step 11: Expect a failure in the following command:
Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. --- 192.168.100.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Note
Wait for supplicant reauthentication.
Step 12: Run command interfaces ethernet eth1 802.1x authenticator show status at DUT0 and check if output contains the following tokens:
Current status: AuthorizedShow output
Current status: Authorized
Step 13: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.385 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.385/0.385/0.385/0.000 ms