Check Incoming Requests

This scenario shows how to configure a community to receive incoming requests in SNMPv1 and SNMPv2c. In addition, the SNMP ‘walk’ and ‘table’ commands are checked.

Test SNMPv1

Description

A community is configured in DUT0 and the ‘walk’ and ‘table’ commands are used to check incoming requests in SNMPv1.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service snmp community COMMUNITY2TEST
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address 10.0.0.2/24
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Note

Initially, local and DUT1 requests are allowed, since the ‘client‘ field is set for all interfaces by default.

Step 3: Run command service snmp walk local-agent v1 COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 267930
IF-MIB::ifInOctets.2 = Counter32: 756353852
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 267930
IF-MIB::ifOutOctets.2 = Counter32: 2124842
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 1620
IF-MIB::ifOutUcastPkts.2 = Counter32: 21599
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 4: Run command service snmp walk remote-agent 10.0.0.1 v1 COMMUNITY2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 267930
IF-MIB::ifInOctets.2 = Counter32: 756353852
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 267930
IF-MIB::ifOutOctets.2 = Counter32: 2124842
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 1620
IF-MIB::ifOutUcastPkts.2 = Counter32: 21599
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 5: Run command service snmp table local-agent v1 COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     267930             0              0            0          0                 0
 0:0:00:00.00  756353852             0              0           20          0                 0
 0:0:00:00.00 1706270543             0              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      267930           1620               0             0           0         0
     2124842          21599               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

Step 6: Run command service snmp table remote-agent 10.0.0.1 v1 COMMUNITY2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     267930             0              0            0          0                 0
 0:0:00:00.00  756353852             0              0           20          0                 0
 0:0:00:00.00 1706270543             0              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      267930           1620               0             0           0         0
     2124842          21599               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

Note

After adding a remote client (that is not DUT1), neither local nor DUT1 requests should be allowed.

Step 7: Modify the following configuration lines in DUT0 :

set service snmp community COMMUNITY2TEST client 10.0.0.3

Step 8: Run command service snmp walk local-agent v1 COMMUNITY2TEST oid ifTable at DUT0 and check if output does not match the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

Timeout: No Response from 127.0.0.1

Step 9: Run command service snmp walk remote-agent 10.0.0.1 v1 COMMUNITY2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

Timeout: No Response from 10.0.0.1

Step 10: Run command service snmp table local-agent v1 COMMUNITY2TEST oid ifTable at DUT0 and check if output does not match the following regular expressions:

SNMP table:.*::ifTable

Show output

Timeout: No Response from 127.0.0.1

Step 11: Run command service snmp table remote-agent 10.0.0.1 v1 COMMUNITY2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:

SNMP table:.*::ifTable

Show output

Timeout: No Response from 10.0.0.1

Note

After adding the local client, local requests should be allowed, but not DUT1 requests.

Step 12: Modify the following configuration lines in DUT0 :

set service snmp community COMMUNITY2TEST client 10.0.0.1
set service snmp community COMMUNITY2TEST client 127.0.0.1

Step 13: Run command service snmp walk local-agent v1 COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 289732
IF-MIB::ifInOctets.2 = Counter32: 756367831
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 289732
IF-MIB::ifOutOctets.2 = Counter32: 2136825
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 1820
IF-MIB::ifOutUcastPkts.2 = Counter32: 21704
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 14: Run command service snmp walk remote-agent 10.0.0.1 v1 COMMUNITY2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

Timeout: No Response from 10.0.0.1

Step 15: Run command service snmp table local-agent v1 COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     304284          1998              0            0          0                 0
 0:0:00:00.00  756368383         28089              0           20          0                 0
 0:0:00:00.00 1706270543      13943931              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      304284           1998               0             0           0         0
     2136825          21704               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

Step 16: Run command service snmp table remote-agent 10.0.0.1 v1 COMMUNITY2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:

SNMP table:.*::ifTable

Show output

Timeout: No Response from 10.0.0.1

Note

After adding the subnet ‘10.0.0.0/24‘ as client, all remote requests from this subnet should be allowed.

Step 17: Modify the following configuration lines in DUT0 :

set service snmp community COMMUNITY2TEST client 10.0.0.0/24

Step 18: Run command service snmp walk local-agent v1 COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 308666
IF-MIB::ifInOctets.2 = Counter32: 756370873
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 308666
IF-MIB::ifOutOctets.2 = Counter32: 2136825
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 2008
IF-MIB::ifOutUcastPkts.2 = Counter32: 21704
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 19: Run command service snmp walk remote-agent 10.0.0.1 v1 COMMUNITY2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 308666
IF-MIB::ifInOctets.2 = Counter32: 756370873
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 308666
IF-MIB::ifOutOctets.2 = Counter32: 2136825
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 2008
IF-MIB::ifOutUcastPkts.2 = Counter32: 21704
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 20: Run command service snmp table local-agent v1 COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     308666             0              0            0          0                 0
 0:0:00:00.00  756370873             0              0           20          0                 0
 0:0:00:00.00 1706270543             0              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      308666           2008               0             0           0         0
     2136825          21704               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

Step 21: Run command service snmp table remote-agent 10.0.0.1 v1 COMMUNITY2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     308666             0              0            0          0                 0
 0:0:00:00.00  756370873             0              0           20          0                 0
 0:0:00:00.00 1706270543             0              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      308666           2008               0             0           0         0
     2136825          21704               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

---

Test SNMPv2c

Description

A community is configured in DUT0 and the ‘walk’ and ‘table’ commands are used to check incoming requests in SNMPv2c.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service snmp community COMMUNITY2TEST
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address 10.0.0.2/24
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Note

Initially, local and DUT1 requests are allowed, since the ‘client‘ field is set for all interfaces by default.

Step 3: Run command service snmp walk local-agent v2c COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 327898
IF-MIB::ifInOctets.2 = Counter32: 756381488
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 327898
IF-MIB::ifOutOctets.2 = Counter32: 2148070
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 2200
IF-MIB::ifOutUcastPkts.2 = Counter32: 21800
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 4: Run command service snmp walk remote-agent 10.0.0.1 v2c COMMUNITY2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 327898
IF-MIB::ifInOctets.2 = Counter32: 756381488
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 327898
IF-MIB::ifOutOctets.2 = Counter32: 2148070
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 2200
IF-MIB::ifOutUcastPkts.2 = Counter32: 21800
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 5: Run command service snmp table local-agent v2c COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     327898             0              0            0          0                 0
 0:0:00:00.00  756381488             0              0           20          0                 0
 0:0:00:00.00 1706270543             0              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      327898           2200               0             0           0         0
     2148070          21800               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

Step 6: Run command service snmp table remote-agent 10.0.0.1 v2c COMMUNITY2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     327898             0              0            0          0                 0
 0:0:00:00.00  756381488             0              0           20          0                 0
 0:0:00:00.00 1706270543             0              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      327898           2200               0             0           0         0
     2148070          21800               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

Note

After adding a remote client (that is not DUT1), neither local nor DUT1 requests should be allowed.

Step 7: Modify the following configuration lines in DUT0 :

set service snmp community COMMUNITY2TEST client 10.0.0.3

Step 8: Run command service snmp walk local-agent v2c COMMUNITY2TEST oid ifTable at DUT0 and check if output does not match the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

Timeout: No Response from 127.0.0.1

Step 9: Run command service snmp walk remote-agent 10.0.0.1 v2c COMMUNITY2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

Timeout: No Response from 10.0.0.1

Step 10: Run command service snmp table local-agent v2c COMMUNITY2TEST oid ifTable at DUT0 and check if output does not match the following regular expressions:

SNMP table:.*::ifTable

Show output

Timeout: No Response from 127.0.0.1

Step 11: Run command service snmp table remote-agent 10.0.0.1 v2c COMMUNITY2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:

SNMP table:.*::ifTable

Show output

Timeout: No Response from 10.0.0.1

Note

After adding the local client, local requests should be allowed, but not DUT1 requests.

Step 12: Modify the following configuration lines in DUT0 :

set service snmp community COMMUNITY2TEST client 10.0.0.1
set service snmp community COMMUNITY2TEST client 127.0.0.1

Step 13: Run command service snmp walk local-agent v2c COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 334676
IF-MIB::ifInOctets.2 = Counter32: 756384632
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 334676
IF-MIB::ifOutOctets.2 = Counter32: 2153586
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 2248
IF-MIB::ifOutUcastPkts.2 = Counter32: 21828
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 14: Run command service snmp walk remote-agent 10.0.0.1 v2c COMMUNITY2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

Timeout: No Response from 10.0.0.1

Step 15: Run command service snmp table local-agent v2c COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     337590          2266              0            0          0                 0
 0:0:00:00.00  756385184         28230              0           20          0                 0
 0:0:00:00.00 1706270543      13943931              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      337590           2266               0             0           0         0
     2153586          21828               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

Step 16: Run command service snmp table remote-agent 10.0.0.1 v2c COMMUNITY2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:

SNMP table:.*::ifTable

Show output

Timeout: No Response from 10.0.0.1

Note

After adding the subnet ‘10.0.0.0/24‘ as client, all remote requests from this subnet should be allowed.

Step 17: Modify the following configuration lines in DUT0 :

set service snmp community COMMUNITY2TEST client 10.0.0.0/24

Step 18: Run command service snmp walk local-agent v2c COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 340511
IF-MIB::ifInOctets.2 = Counter32: 756385748
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 340511
IF-MIB::ifOutOctets.2 = Counter32: 2153586
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 2284
IF-MIB::ifOutUcastPkts.2 = Counter32: 21828
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 19: Run command service snmp walk remote-agent 10.0.0.1 v2c COMMUNITY2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:

::ifDescr\.1 = STRING: "?lo"?

Show output

IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: ip_vti0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 65536
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 0
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0
IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 340511
IF-MIB::ifInOctets.2 = Counter32: 756385748
IF-MIB::ifInOctets.3 = Counter32: 1706270543
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 0
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 20
IF-MIB::ifInDiscards.3 = Counter32: 12
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 340511
IF-MIB::ifOutOctets.2 = Counter32: 2153586
IF-MIB::ifOutOctets.3 = Counter32: 1706286605
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 2284
IF-MIB::ifOutUcastPkts.2 = Counter32: 21828
IF-MIB::ifOutUcastPkts.3 = Counter32: 13944100
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

Step 20: Run command service snmp table local-agent v2c COMMUNITY2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     340511             0              0            0          0                 0
 0:0:00:00.00  756385748             0              0           20          0                 0
 0:0:00:00.00 1706270543             0              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      340511           2284               0             0           0         0
     2153586          21828               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

Step 21: Run command service snmp table remote-agent 10.0.0.1 v2c COMMUNITY2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:

SNMP table:.*::ifTable

Show output

SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu  ifSpeed    ifPhysAddress ifAdminStatus ifOperStatus
       1      lo softwareLoopback 65536 10000000                             up           up
       2    eth0   ethernetCsmacd  1500        0 de:ad:be:ef:6c:0            up           up
       3    eth1   ethernetCsmacd  1500        0 de:ad:be:ef:6c:1          down         down
       4 ip_vti0           tunnel  1480        0                           down         down

SNMP table IF-MIB::ifTable, part 2

 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos
 0:0:00:00.00     340511             0              0            0          0                 0
 0:0:00:00.00  756385748             0              0           20          0                 0
 0:0:00:00.00 1706270543             0              0           12          0                 0
 0:0:00:00.00          0             0              0            0          0                 0

SNMP table IF-MIB::ifTable, part 3

 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen
      340511           2284               0             0           0         0
     2153586          21828               0             0           0         0
  1706286605       13944100               0             0           0         0
           0              0               0             0           0         0

SNMP table IF-MIB::ifTable, part 4

              ifSpecific
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero
 SNMPv2-SMI::zeroDotZero

---