Check Listening Addresses
This scenario shows how to restrict the addresses used to listen for incoming requests in SNMPv3. In addition, the SNMP ‘walk’ and ‘table’ commands are checked.
Test SNMPv3
Description
Listening addresses are configured for a user in DUT0, and the ‘walk’ and ‘table’ commands are used to check incoming requests in SNMPv3 .
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 20.0.0.1/24 set interfaces ethernet eth0 address 10.0.0.1/24 set service snmp user USER2TEST set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Set the following configuration in DUT1 :
set interfaces ethernet eth0 address 10.0.0.2/24 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Note
Initially, local and DUT1 requests are allowed, since the ‘listen‘ field is set for all interfaces by default.
Step 3: Run command service snmp walk local-agent v3 USER2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:
::ifDescr\.1 = STRING: "?lo"?Show output
IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifIndex.2 = INTEGER: 2 IF-MIB::ifIndex.3 = INTEGER: 3 IF-MIB::ifIndex.4 = INTEGER: 4 IF-MIB::ifIndex.46 = INTEGER: 46 IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 IF-MIB::ifDescr.4 = STRING: ip_vti0 IF-MIB::ifDescr.46 = STRING: dum0 IF-MIB::ifType.1 = INTEGER: softwareLoopback(24) IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.4 = INTEGER: tunnel(131) IF-MIB::ifType.46 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.1 = INTEGER: 65536 IF-MIB::ifMtu.2 = INTEGER: 1500 IF-MIB::ifMtu.3 = INTEGER: 1500 IF-MIB::ifMtu.4 = INTEGER: 1480 IF-MIB::ifMtu.46 = INTEGER: 1500 IF-MIB::ifSpeed.1 = Gauge32: 10000000 IF-MIB::ifSpeed.2 = Gauge32: 0 IF-MIB::ifSpeed.3 = Gauge32: 0 IF-MIB::ifSpeed.4 = Gauge32: 0 IF-MIB::ifSpeed.46 = Gauge32: 0 IF-MIB::ifPhysAddress.1 = STRING: IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0 IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1 IF-MIB::ifPhysAddress.4 = STRING: IF-MIB::ifPhysAddress.46 = STRING: fe:49:7:d3:da:5b IF-MIB::ifAdminStatus.1 = INTEGER: up(1) IF-MIB::ifAdminStatus.2 = INTEGER: up(1) IF-MIB::ifAdminStatus.3 = INTEGER: down(2) IF-MIB::ifAdminStatus.4 = INTEGER: down(2) IF-MIB::ifAdminStatus.46 = INTEGER: up(1) IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.2 = INTEGER: up(1) IF-MIB::ifOperStatus.3 = INTEGER: down(2) IF-MIB::ifOperStatus.4 = INTEGER: down(2) IF-MIB::ifOperStatus.46 = INTEGER: up(1) IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.46 = Timeticks: (0) 0:00:00.00 IF-MIB::ifInOctets.1 = Counter32: 20530 IF-MIB::ifInOctets.2 = Counter32: 1039498 IF-MIB::ifInOctets.3 = Counter32: 30642 IF-MIB::ifInOctets.4 = Counter32: 0 IF-MIB::ifInOctets.46 = Counter32: 0 IF-MIB::ifInUcastPkts.1 = Counter32: 0 IF-MIB::ifInUcastPkts.2 = Counter32: 0 IF-MIB::ifInUcastPkts.3 = Counter32: 0 IF-MIB::ifInUcastPkts.4 = Counter32: 0 IF-MIB::ifInUcastPkts.46 = Counter32: 0 IF-MIB::ifInNUcastPkts.1 = Counter32: 0 IF-MIB::ifInNUcastPkts.2 = Counter32: 0 IF-MIB::ifInNUcastPkts.3 = Counter32: 0 IF-MIB::ifInNUcastPkts.4 = Counter32: 0 IF-MIB::ifInNUcastPkts.46 = Counter32: 0 IF-MIB::ifInDiscards.1 = Counter32: 0 IF-MIB::ifInDiscards.2 = Counter32: 0 IF-MIB::ifInDiscards.3 = Counter32: 0 IF-MIB::ifInDiscards.4 = Counter32: 0 IF-MIB::ifInDiscards.46 = Counter32: 0 IF-MIB::ifInErrors.1 = Counter32: 0 IF-MIB::ifInErrors.2 = Counter32: 0 IF-MIB::ifInErrors.3 = Counter32: 0 IF-MIB::ifInErrors.4 = Counter32: 0 IF-MIB::ifInErrors.46 = Counter32: 0 IF-MIB::ifInUnknownProtos.1 = Counter32: 0 IF-MIB::ifInUnknownProtos.2 = Counter32: 0 IF-MIB::ifInUnknownProtos.3 = Counter32: 0 IF-MIB::ifInUnknownProtos.4 = Counter32: 0 IF-MIB::ifInUnknownProtos.46 = Counter32: 0 IF-MIB::ifOutOctets.1 = Counter32: 20530 IF-MIB::ifOutOctets.2 = Counter32: 46912060 IF-MIB::ifOutOctets.3 = Counter32: 19794 IF-MIB::ifOutOctets.4 = Counter32: 0 IF-MIB::ifOutOctets.46 = Counter32: 0 IF-MIB::ifOutUcastPkts.1 = Counter32: 205 IF-MIB::ifOutUcastPkts.2 = Counter32: 32191 IF-MIB::ifOutUcastPkts.3 = Counter32: 168 IF-MIB::ifOutUcastPkts.4 = Counter32: 0 IF-MIB::ifOutUcastPkts.46 = Counter32: 0 IF-MIB::ifOutNUcastPkts.1 = Counter32: 0 IF-MIB::ifOutNUcastPkts.2 = Counter32: 0 IF-MIB::ifOutNUcastPkts.3 = Counter32: 0 IF-MIB::ifOutNUcastPkts.4 = Counter32: 0 IF-MIB::ifOutNUcastPkts.46 = Counter32: 0 IF-MIB::ifOutDiscards.1 = Counter32: 0 IF-MIB::ifOutDiscards.2 = Counter32: 0 IF-MIB::ifOutDiscards.3 = Counter32: 0 IF-MIB::ifOutDiscards.4 = Counter32: 0 IF-MIB::ifOutDiscards.46 = Counter32: 0 IF-MIB::ifOutErrors.1 = Counter32: 0 IF-MIB::ifOutErrors.2 = Counter32: 0 IF-MIB::ifOutErrors.3 = Counter32: 0 IF-MIB::ifOutErrors.4 = Counter32: 0 IF-MIB::ifOutErrors.46 = Counter32: 0 IF-MIB::ifOutQLen.1 = Gauge32: 0 IF-MIB::ifOutQLen.2 = Gauge32: 0 IF-MIB::ifOutQLen.3 = Gauge32: 0 IF-MIB::ifOutQLen.4 = Gauge32: 0 IF-MIB::ifOutQLen.46 = Gauge32: 0 IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.46 = OID: SNMPv2-SMI::zeroDotZero
Step 4: Run command service snmp walk remote-agent 10.0.0.1 v3 USER2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:
::ifDescr\.1 = STRING: "?lo"?Show output
IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifIndex.2 = INTEGER: 2 IF-MIB::ifIndex.3 = INTEGER: 3 IF-MIB::ifIndex.4 = INTEGER: 4 IF-MIB::ifIndex.46 = INTEGER: 46 IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 IF-MIB::ifDescr.4 = STRING: ip_vti0 IF-MIB::ifDescr.46 = STRING: dum0 IF-MIB::ifType.1 = INTEGER: softwareLoopback(24) IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.4 = INTEGER: tunnel(131) IF-MIB::ifType.46 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.1 = INTEGER: 65536 IF-MIB::ifMtu.2 = INTEGER: 1500 IF-MIB::ifMtu.3 = INTEGER: 1500 IF-MIB::ifMtu.4 = INTEGER: 1480 IF-MIB::ifMtu.46 = INTEGER: 1500 IF-MIB::ifSpeed.1 = Gauge32: 10000000 IF-MIB::ifSpeed.2 = Gauge32: 0 IF-MIB::ifSpeed.3 = Gauge32: 0 IF-MIB::ifSpeed.4 = Gauge32: 0 IF-MIB::ifSpeed.46 = Gauge32: 0 IF-MIB::ifPhysAddress.1 = STRING: IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0 IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1 IF-MIB::ifPhysAddress.4 = STRING: IF-MIB::ifPhysAddress.46 = STRING: fe:49:7:d3:da:5b IF-MIB::ifAdminStatus.1 = INTEGER: up(1) IF-MIB::ifAdminStatus.2 = INTEGER: up(1) IF-MIB::ifAdminStatus.3 = INTEGER: down(2) IF-MIB::ifAdminStatus.4 = INTEGER: down(2) IF-MIB::ifAdminStatus.46 = INTEGER: up(1) IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.2 = INTEGER: up(1) IF-MIB::ifOperStatus.3 = INTEGER: down(2) IF-MIB::ifOperStatus.4 = INTEGER: down(2) IF-MIB::ifOperStatus.46 = INTEGER: up(1) IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.46 = Timeticks: (0) 0:00:00.00 IF-MIB::ifInOctets.1 = Counter32: 20530 IF-MIB::ifInOctets.2 = Counter32: 1039498 IF-MIB::ifInOctets.3 = Counter32: 30642 IF-MIB::ifInOctets.4 = Counter32: 0 IF-MIB::ifInOctets.46 = Counter32: 0 IF-MIB::ifInUcastPkts.1 = Counter32: 0 IF-MIB::ifInUcastPkts.2 = Counter32: 0 IF-MIB::ifInUcastPkts.3 = Counter32: 0 IF-MIB::ifInUcastPkts.4 = Counter32: 0 IF-MIB::ifInUcastPkts.46 = Counter32: 0 IF-MIB::ifInNUcastPkts.1 = Counter32: 0 IF-MIB::ifInNUcastPkts.2 = Counter32: 0 IF-MIB::ifInNUcastPkts.3 = Counter32: 0 IF-MIB::ifInNUcastPkts.4 = Counter32: 0 IF-MIB::ifInNUcastPkts.46 = Counter32: 0 IF-MIB::ifInDiscards.1 = Counter32: 0 IF-MIB::ifInDiscards.2 = Counter32: 0 IF-MIB::ifInDiscards.3 = Counter32: 0 IF-MIB::ifInDiscards.4 = Counter32: 0 IF-MIB::ifInDiscards.46 = Counter32: 0 IF-MIB::ifInErrors.1 = Counter32: 0 IF-MIB::ifInErrors.2 = Counter32: 0 IF-MIB::ifInErrors.3 = Counter32: 0 IF-MIB::ifInErrors.4 = Counter32: 0 IF-MIB::ifInErrors.46 = Counter32: 0 IF-MIB::ifInUnknownProtos.1 = Counter32: 0 IF-MIB::ifInUnknownProtos.2 = Counter32: 0 IF-MIB::ifInUnknownProtos.3 = Counter32: 0 IF-MIB::ifInUnknownProtos.4 = Counter32: 0 IF-MIB::ifInUnknownProtos.46 = Counter32: 0 IF-MIB::ifOutOctets.1 = Counter32: 20530 IF-MIB::ifOutOctets.2 = Counter32: 46912060 IF-MIB::ifOutOctets.3 = Counter32: 19794 IF-MIB::ifOutOctets.4 = Counter32: 0 IF-MIB::ifOutOctets.46 = Counter32: 0 IF-MIB::ifOutUcastPkts.1 = Counter32: 205 IF-MIB::ifOutUcastPkts.2 = Counter32: 32191 IF-MIB::ifOutUcastPkts.3 = Counter32: 168 IF-MIB::ifOutUcastPkts.4 = Counter32: 0 IF-MIB::ifOutUcastPkts.46 = Counter32: 0 IF-MIB::ifOutNUcastPkts.1 = Counter32: 0 IF-MIB::ifOutNUcastPkts.2 = Counter32: 0 IF-MIB::ifOutNUcastPkts.3 = Counter32: 0 IF-MIB::ifOutNUcastPkts.4 = Counter32: 0 IF-MIB::ifOutNUcastPkts.46 = Counter32: 0 IF-MIB::ifOutDiscards.1 = Counter32: 0 IF-MIB::ifOutDiscards.2 = Counter32: 0 IF-MIB::ifOutDiscards.3 = Counter32: 0 IF-MIB::ifOutDiscards.4 = Counter32: 0 IF-MIB::ifOutDiscards.46 = Counter32: 0 IF-MIB::ifOutErrors.1 = Counter32: 0 IF-MIB::ifOutErrors.2 = Counter32: 0 IF-MIB::ifOutErrors.3 = Counter32: 0 IF-MIB::ifOutErrors.4 = Counter32: 0 IF-MIB::ifOutErrors.46 = Counter32: 0 IF-MIB::ifOutQLen.1 = Gauge32: 0 IF-MIB::ifOutQLen.2 = Gauge32: 0 IF-MIB::ifOutQLen.3 = Gauge32: 0 IF-MIB::ifOutQLen.4 = Gauge32: 0 IF-MIB::ifOutQLen.46 = Gauge32: 0 IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.46 = OID: SNMPv2-SMI::zeroDotZero
Step 5: Run command service snmp table local-agent v3 USER2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:
SNMP table:.*::ifTableShow output
SNMP table: IF-MIB::ifTable ifIndex ifDescr ifType ifMtu ifSpeed ifPhysAddress ifAdminStatus ifOperStatus 1 lo softwareLoopback 65536 10000000 up up 2 eth0 ethernetCsmacd 1500 0 de:ad:be:ef:6c:0 up up 3 eth1 ethernetCsmacd 1500 0 de:ad:be:ef:6c:1 down down 4 ip_vti0 tunnel 1480 0 down down 46 dum0 ethernetCsmacd 1500 0 fe:49:7:d3:da:5b up up SNMP table IF-MIB::ifTable, part 2 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos 0:0:00:00.00 20530 0 0 0 0 0 0:0:00:00.00 1039498 0 0 0 0 0 0:0:00:00.00 30642 0 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 SNMP table IF-MIB::ifTable, part 3 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen 20530 205 0 0 0 0 46912060 32191 0 0 0 0 19794 168 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SNMP table IF-MIB::ifTable, part 4 ifSpecific SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero
Step 6: Run command service snmp table remote-agent 10.0.0.1 v3 USER2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:
SNMP table:.*::ifTableShow output
SNMP table: IF-MIB::ifTable ifIndex ifDescr ifType ifMtu ifSpeed ifPhysAddress ifAdminStatus ifOperStatus 1 lo softwareLoopback 65536 10000000 up up 2 eth0 ethernetCsmacd 1500 0 de:ad:be:ef:6c:0 up up 3 eth1 ethernetCsmacd 1500 0 de:ad:be:ef:6c:1 down down 4 ip_vti0 tunnel 1480 0 down down 46 dum0 ethernetCsmacd 1500 0 fe:49:7:d3:da:5b up up SNMP table IF-MIB::ifTable, part 2 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos 0:0:00:00.00 20530 0 0 0 0 0 0:0:00:00.00 1039498 0 0 0 0 0 0:0:00:00.00 30642 0 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 SNMP table IF-MIB::ifTable, part 3 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen 20530 205 0 0 0 0 46912060 32191 0 0 0 0 19794 168 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SNMP table IF-MIB::ifTable, part 4 ifSpecific SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero
Note
After configuring SNMP to listen on the local address, local requests should be allowed, but not DUT1 requests.
Step 7: Modify the following configuration lines in DUT0 :
set interfaces dummy dum1 address 127.0.0.1/24 set service snmp listen address 127.0.0.1
Step 8: Run command service snmp walk local-agent v3 USER2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:
::ifDescr\.1 = STRING: "?lo"?Show output
IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifIndex.2 = INTEGER: 2 IF-MIB::ifIndex.3 = INTEGER: 3 IF-MIB::ifIndex.4 = INTEGER: 4 IF-MIB::ifIndex.46 = INTEGER: 46 IF-MIB::ifIndex.47 = INTEGER: 47 IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 IF-MIB::ifDescr.4 = STRING: ip_vti0 IF-MIB::ifDescr.46 = STRING: dum0 IF-MIB::ifDescr.47 = STRING: dum1 IF-MIB::ifType.1 = INTEGER: softwareLoopback(24) IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.4 = INTEGER: tunnel(131) IF-MIB::ifType.46 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.47 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.1 = INTEGER: 65536 IF-MIB::ifMtu.2 = INTEGER: 1500 IF-MIB::ifMtu.3 = INTEGER: 1500 IF-MIB::ifMtu.4 = INTEGER: 1480 IF-MIB::ifMtu.46 = INTEGER: 1500 IF-MIB::ifMtu.47 = INTEGER: 1500 IF-MIB::ifSpeed.1 = Gauge32: 10000000 IF-MIB::ifSpeed.2 = Gauge32: 0 IF-MIB::ifSpeed.3 = Gauge32: 0 IF-MIB::ifSpeed.4 = Gauge32: 0 IF-MIB::ifSpeed.46 = Gauge32: 0 IF-MIB::ifSpeed.47 = Gauge32: 0 IF-MIB::ifPhysAddress.1 = STRING: IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0 IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1 IF-MIB::ifPhysAddress.4 = STRING: IF-MIB::ifPhysAddress.46 = STRING: fe:49:7:d3:da:5b IF-MIB::ifPhysAddress.47 = STRING: 2a:c9:1e:db:78:c4 IF-MIB::ifAdminStatus.1 = INTEGER: up(1) IF-MIB::ifAdminStatus.2 = INTEGER: up(1) IF-MIB::ifAdminStatus.3 = INTEGER: down(2) IF-MIB::ifAdminStatus.4 = INTEGER: down(2) IF-MIB::ifAdminStatus.46 = INTEGER: up(1) IF-MIB::ifAdminStatus.47 = INTEGER: up(1) IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.2 = INTEGER: up(1) IF-MIB::ifOperStatus.3 = INTEGER: down(2) IF-MIB::ifOperStatus.4 = INTEGER: down(2) IF-MIB::ifOperStatus.46 = INTEGER: up(1) IF-MIB::ifOperStatus.47 = INTEGER: up(1) IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.46 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.47 = Timeticks: (0) 0:00:00.00 IF-MIB::ifInOctets.1 = Counter32: 32128 IF-MIB::ifInOctets.2 = Counter32: 1043904 IF-MIB::ifInOctets.3 = Counter32: 30642 IF-MIB::ifInOctets.4 = Counter32: 0 IF-MIB::ifInOctets.46 = Counter32: 0 IF-MIB::ifInOctets.47 = Counter32: 0 IF-MIB::ifInUcastPkts.1 = Counter32: 0 IF-MIB::ifInUcastPkts.2 = Counter32: 0 IF-MIB::ifInUcastPkts.3 = Counter32: 0 IF-MIB::ifInUcastPkts.4 = Counter32: 0 IF-MIB::ifInUcastPkts.46 = Counter32: 0 IF-MIB::ifInUcastPkts.47 = Counter32: 0 IF-MIB::ifInNUcastPkts.1 = Counter32: 0 IF-MIB::ifInNUcastPkts.2 = Counter32: 0 IF-MIB::ifInNUcastPkts.3 = Counter32: 0 IF-MIB::ifInNUcastPkts.4 = Counter32: 0 IF-MIB::ifInNUcastPkts.46 = Counter32: 0 IF-MIB::ifInNUcastPkts.47 = Counter32: 0 IF-MIB::ifInDiscards.1 = Counter32: 0 IF-MIB::ifInDiscards.2 = Counter32: 0 IF-MIB::ifInDiscards.3 = Counter32: 0 IF-MIB::ifInDiscards.4 = Counter32: 0 IF-MIB::ifInDiscards.46 = Counter32: 0 IF-MIB::ifInDiscards.47 = Counter32: 0 IF-MIB::ifInErrors.1 = Counter32: 0 IF-MIB::ifInErrors.2 = Counter32: 0 IF-MIB::ifInErrors.3 = Counter32: 0 IF-MIB::ifInErrors.4 = Counter32: 0 IF-MIB::ifInErrors.46 = Counter32: 0 IF-MIB::ifInErrors.47 = Counter32: 0 IF-MIB::ifInUnknownProtos.1 = Counter32: 0 IF-MIB::ifInUnknownProtos.2 = Counter32: 0 IF-MIB::ifInUnknownProtos.3 = Counter32: 0 IF-MIB::ifInUnknownProtos.4 = Counter32: 0 IF-MIB::ifInUnknownProtos.46 = Counter32: 0 IF-MIB::ifInUnknownProtos.47 = Counter32: 0 IF-MIB::ifOutOctets.1 = Counter32: 32128 IF-MIB::ifOutOctets.2 = Counter32: 46921086 IF-MIB::ifOutOctets.3 = Counter32: 19794 IF-MIB::ifOutOctets.4 = Counter32: 0 IF-MIB::ifOutOctets.46 = Counter32: 0 IF-MIB::ifOutOctets.47 = Counter32: 0 IF-MIB::ifOutUcastPkts.1 = Counter32: 257 IF-MIB::ifOutUcastPkts.2 = Counter32: 32225 IF-MIB::ifOutUcastPkts.3 = Counter32: 168 IF-MIB::ifOutUcastPkts.4 = Counter32: 0 IF-MIB::ifOutUcastPkts.46 = Counter32: 0 IF-MIB::ifOutUcastPkts.47 = Counter32: 0 IF-MIB::ifOutNUcastPkts.1 = Counter32: 0 IF-MIB::ifOutNUcastPkts.2 = Counter32: 0 IF-MIB::ifOutNUcastPkts.3 = Counter32: 0 IF-MIB::ifOutNUcastPkts.4 = Counter32: 0 IF-MIB::ifOutNUcastPkts.46 = Counter32: 0 IF-MIB::ifOutNUcastPkts.47 = Counter32: 0 IF-MIB::ifOutDiscards.1 = Counter32: 0 IF-MIB::ifOutDiscards.2 = Counter32: 0 IF-MIB::ifOutDiscards.3 = Counter32: 0 IF-MIB::ifOutDiscards.4 = Counter32: 0 IF-MIB::ifOutDiscards.46 = Counter32: 0 IF-MIB::ifOutDiscards.47 = Counter32: 0 IF-MIB::ifOutErrors.1 = Counter32: 0 IF-MIB::ifOutErrors.2 = Counter32: 0 IF-MIB::ifOutErrors.3 = Counter32: 0 IF-MIB::ifOutErrors.4 = Counter32: 0 IF-MIB::ifOutErrors.46 = Counter32: 0 IF-MIB::ifOutErrors.47 = Counter32: 0 IF-MIB::ifOutQLen.1 = Gauge32: 0 IF-MIB::ifOutQLen.2 = Gauge32: 0 IF-MIB::ifOutQLen.3 = Gauge32: 0 IF-MIB::ifOutQLen.4 = Gauge32: 0 IF-MIB::ifOutQLen.46 = Gauge32: 0 IF-MIB::ifOutQLen.47 = Gauge32: 0 IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.46 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.47 = OID: SNMPv2-SMI::zeroDotZero
Step 9: Run command service snmp walk remote-agent 10.0.0.1 v3 USER2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:
::ifDescr\.1 = STRING: "?lo"?Show output
snmpbulkwalk: Timeout (Sub-id not found: (top) -> ifTable)
Step 10: Run command service snmp table local-agent v3 USER2TEST oid ifTable at DUT0 and check if output matches the following regular expressions:
SNMP table:.*::ifTableShow output
SNMP table: IF-MIB::ifTable ifIndex ifDescr ifType ifMtu ifSpeed ifPhysAddress ifAdminStatus ifOperStatus 1 lo softwareLoopback 65536 10000000 up up 2 eth0 ethernetCsmacd 1500 0 de:ad:be:ef:6c:0 up up 3 eth1 ethernetCsmacd 1500 0 de:ad:be:ef:6c:1 down down 4 ip_vti0 tunnel 1480 0 down down 46 dum0 ethernetCsmacd 1500 0 fe:49:7:d3:da:5b up up 47 dum1 ethernetCsmacd 1500 0 2a:c9:1e:db:78:c4 up up SNMP table IF-MIB::ifTable, part 2 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos 0:0:00:00.00 38859 287 0 0 0 0 0:0:00:00.00 1044582 14910 0 0 0 0 0:0:00:00.00 30642 192 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 SNMP table IF-MIB::ifTable, part 3 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen 38859 287 0 0 0 0 46921932 32232 0 0 0 0 19794 168 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SNMP table IF-MIB::ifTable, part 4 ifSpecific SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero
Step 11: Run command service snmp table remote-agent 10.0.0.1 v3 USER2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:
SNMP table:.*::ifTableShow output
snmptable: Timeout (Sub-id not found: (top) -> ifTable)
Note
After configuring SNMP to listen on the ‘10.0.0.1‘ address, DUT1 requests should be allowed, but not local requests.
Step 12: Modify the following configuration lines in DUT0 :
delete interfaces dummy dum1 delete service snmp listen address 127.0.0.1 set service snmp listen address 10.0.0.1
Step 13: Run command service snmp walk local-agent v3 USER2TEST oid ifTable at DUT0 and check if output does not match the following regular expressions:
::ifDescr\.1 = STRING: "?lo"?Show output
snmpbulkwalk: Timeout (Sub-id not found: (top) -> ifTable)
Step 14: Run command service snmp walk remote-agent 10.0.0.1 v3 USER2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:
::ifDescr\.1 = STRING: "?lo"?Show output
IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifIndex.2 = INTEGER: 2 IF-MIB::ifIndex.3 = INTEGER: 3 IF-MIB::ifIndex.4 = INTEGER: 4 IF-MIB::ifIndex.46 = INTEGER: 46 IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 IF-MIB::ifDescr.4 = STRING: ip_vti0 IF-MIB::ifDescr.46 = STRING: dum0 IF-MIB::ifType.1 = INTEGER: softwareLoopback(24) IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.4 = INTEGER: tunnel(131) IF-MIB::ifType.46 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.1 = INTEGER: 65536 IF-MIB::ifMtu.2 = INTEGER: 1500 IF-MIB::ifMtu.3 = INTEGER: 1500 IF-MIB::ifMtu.4 = INTEGER: 1480 IF-MIB::ifMtu.46 = INTEGER: 1500 IF-MIB::ifSpeed.1 = Gauge32: 10000000 IF-MIB::ifSpeed.2 = Gauge32: 0 IF-MIB::ifSpeed.3 = Gauge32: 0 IF-MIB::ifSpeed.4 = Gauge32: 0 IF-MIB::ifSpeed.46 = Gauge32: 0 IF-MIB::ifPhysAddress.1 = STRING: IF-MIB::ifPhysAddress.2 = STRING: de:ad:be:ef:6c:0 IF-MIB::ifPhysAddress.3 = STRING: de:ad:be:ef:6c:1 IF-MIB::ifPhysAddress.4 = STRING: IF-MIB::ifPhysAddress.46 = STRING: fe:49:7:d3:da:5b IF-MIB::ifAdminStatus.1 = INTEGER: up(1) IF-MIB::ifAdminStatus.2 = INTEGER: up(1) IF-MIB::ifAdminStatus.3 = INTEGER: down(2) IF-MIB::ifAdminStatus.4 = INTEGER: down(2) IF-MIB::ifAdminStatus.46 = INTEGER: up(1) IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.2 = INTEGER: up(1) IF-MIB::ifOperStatus.3 = INTEGER: down(2) IF-MIB::ifOperStatus.4 = INTEGER: down(2) IF-MIB::ifOperStatus.46 = INTEGER: up(1) IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.46 = Timeticks: (0) 0:00:00.00 IF-MIB::ifInOctets.1 = Counter32: 46869 IF-MIB::ifInOctets.2 = Counter32: 1045218 IF-MIB::ifInOctets.3 = Counter32: 30642 IF-MIB::ifInOctets.4 = Counter32: 0 IF-MIB::ifInOctets.46 = Counter32: 0 IF-MIB::ifInUcastPkts.1 = Counter32: 329 IF-MIB::ifInUcastPkts.2 = Counter32: 14916 IF-MIB::ifInUcastPkts.3 = Counter32: 192 IF-MIB::ifInUcastPkts.4 = Counter32: 0 IF-MIB::ifInUcastPkts.46 = Counter32: 0 IF-MIB::ifInNUcastPkts.1 = Counter32: 0 IF-MIB::ifInNUcastPkts.2 = Counter32: 0 IF-MIB::ifInNUcastPkts.3 = Counter32: 0 IF-MIB::ifInNUcastPkts.4 = Counter32: 0 IF-MIB::ifInNUcastPkts.46 = Counter32: 0 IF-MIB::ifInDiscards.1 = Counter32: 0 IF-MIB::ifInDiscards.2 = Counter32: 0 IF-MIB::ifInDiscards.3 = Counter32: 0 IF-MIB::ifInDiscards.4 = Counter32: 0 IF-MIB::ifInDiscards.46 = Counter32: 0 IF-MIB::ifInErrors.1 = Counter32: 0 IF-MIB::ifInErrors.2 = Counter32: 0 IF-MIB::ifInErrors.3 = Counter32: 0 IF-MIB::ifInErrors.4 = Counter32: 0 IF-MIB::ifInErrors.46 = Counter32: 0 IF-MIB::ifInUnknownProtos.1 = Counter32: 0 IF-MIB::ifInUnknownProtos.2 = Counter32: 0 IF-MIB::ifInUnknownProtos.3 = Counter32: 0 IF-MIB::ifInUnknownProtos.4 = Counter32: 0 IF-MIB::ifInUnknownProtos.46 = Counter32: 0 IF-MIB::ifOutOctets.1 = Counter32: 46869 IF-MIB::ifOutOctets.2 = Counter32: 46922736 IF-MIB::ifOutOctets.3 = Counter32: 19794 IF-MIB::ifOutOctets.4 = Counter32: 0 IF-MIB::ifOutOctets.46 = Counter32: 0 IF-MIB::ifOutUcastPkts.1 = Counter32: 329 IF-MIB::ifOutUcastPkts.2 = Counter32: 32238 IF-MIB::ifOutUcastPkts.3 = Counter32: 168 IF-MIB::ifOutUcastPkts.4 = Counter32: 0 IF-MIB::ifOutUcastPkts.46 = Counter32: 0 IF-MIB::ifOutNUcastPkts.1 = Counter32: 0 IF-MIB::ifOutNUcastPkts.2 = Counter32: 0 IF-MIB::ifOutNUcastPkts.3 = Counter32: 0 IF-MIB::ifOutNUcastPkts.4 = Counter32: 0 IF-MIB::ifOutNUcastPkts.46 = Counter32: 0 IF-MIB::ifOutDiscards.1 = Counter32: 0 IF-MIB::ifOutDiscards.2 = Counter32: 0 IF-MIB::ifOutDiscards.3 = Counter32: 0 IF-MIB::ifOutDiscards.4 = Counter32: 0 IF-MIB::ifOutDiscards.46 = Counter32: 0 IF-MIB::ifOutErrors.1 = Counter32: 0 IF-MIB::ifOutErrors.2 = Counter32: 0 IF-MIB::ifOutErrors.3 = Counter32: 0 IF-MIB::ifOutErrors.4 = Counter32: 0 IF-MIB::ifOutErrors.46 = Counter32: 0 IF-MIB::ifOutQLen.1 = Gauge32: 0 IF-MIB::ifOutQLen.2 = Gauge32: 0 IF-MIB::ifOutQLen.3 = Gauge32: 0 IF-MIB::ifOutQLen.4 = Gauge32: 0 IF-MIB::ifOutQLen.46 = Gauge32: 0 IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.46 = OID: SNMPv2-SMI::zeroDotZero
Step 15: Run command service snmp table local-agent v3 USER2TEST oid ifTable at DUT0 and check if output does not match the following regular expressions:
SNMP table:.*::ifTableShow output
snmptable: Timeout (Sub-id not found: (top) -> ifTable)
Step 16: Run command service snmp table remote-agent 10.0.0.1 v3 USER2TEST oid ifTable at DUT1 and check if output matches the following regular expressions:
SNMP table:.*::ifTableShow output
SNMP table: IF-MIB::ifTable ifIndex ifDescr ifType ifMtu ifSpeed ifPhysAddress ifAdminStatus ifOperStatus 1 lo softwareLoopback 65536 10000000 up up 2 eth0 ethernetCsmacd 1500 0 de:ad:be:ef:6c:0 up up 3 eth1 ethernetCsmacd 1500 0 de:ad:be:ef:6c:1 down down 4 ip_vti0 tunnel 1480 0 down down 46 dum0 ethernetCsmacd 1500 0 fe:49:7:d3:da:5b up up SNMP table IF-MIB::ifTable, part 2 ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos 0:0:00:00.00 48141 341 0 0 0 0 0:0:00:00.00 1047343 14930 0 0 0 0 0:0:00:00.00 30642 192 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 0:0:00:00.00 0 0 0 0 0 0 SNMP table IF-MIB::ifTable, part 3 ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen 48141 341 0 0 0 0 46926862 32252 0 0 0 0 19794 168 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SNMP table IF-MIB::ifTable, part 4 ifSpecific SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero SNMPv2-SMI::zeroDotZero
Note
After configuring SNMP to listen on the ‘20.0.0.1‘ address, neither local nor DUT1 requests should be allowed.
Step 17: Modify the following configuration lines in DUT0 :
delete service snmp listen address 10.0.0.1 set service snmp listen address 20.0.0.1
Step 18: Run command service snmp walk local-agent v3 USER2TEST oid ifTable at DUT0 and check if output does not match the following regular expressions:
::ifDescr\.1 = STRING: "?lo"?Show output
snmpbulkwalk: Timeout (Sub-id not found: (top) -> ifTable)
Step 19: Run command service snmp walk remote-agent 10.0.0.1 v3 USER2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:
::ifDescr\.1 = STRING: "?lo"?Show output
snmpbulkwalk: Timeout (Sub-id not found: (top) -> ifTable)
Step 20: Run command service snmp table local-agent v3 USER2TEST oid ifTable at DUT0 and check if output does not match the following regular expressions:
SNMP table:.*::ifTableShow output
snmptable: Timeout (Sub-id not found: (top) -> ifTable)
Step 21: Run command service snmp table remote-agent 10.0.0.1 v3 USER2TEST oid ifTable at DUT1 and check if output does not match the following regular expressions:
SNMP table:.*::ifTableShow output
snmptable: Timeout (Sub-id not found: (top) -> ifTable)