Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$100WdKksb6ge4riA$HBmZ6.b4Zzu0NHUT9fcYe6vVJmb5cLdf6F.GpN1KOMduCXv7FHPRtE7WfMU5kirwue.Ffc7U.9sqs5wJ0Skcw0'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX1/nS5yqtJO7wrYxyouErXr2N1KalYEjssU=
set system login user admin authentication encrypted-password '$6$jPwVLGXt9c/8clCz$WBlIQzT.z67kbTJcsesbewKApMsB/bEWcEuNohbEPOzOm.96oRb98xBBexz9ezZelD7mrH4AjCSZdmhEShH0M0'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$CV4jehzrJfxd53GW$slylG.JlxDgu2rg2GPfs9.LRcqYkgbZEddzSBM7wTuDj3PsT4f1ev99s7spXJgRVqPZwyUBr2vKQC7.vrTX8L/'
set system login user test authentication encrypted-password '$6$46HEnQ1RiOJ.fkI7$M2HrFzufX2RMin1xQ8zGy4o1DrwqXPCgUuCYYFPJ0ME/JxCTBvA/W9YRrEeMaDFgqYOSK7lXi9giwDhzSXYtt1'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied