Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$eHnGqE6ce9.Nus/7$LQzahafxAp33vICffMYztUuNYW8XPCrb./XNV0ugFOTudwVgLR/cUjztGiX10ZrebsHd2qYUgzZ9OfMRhb31I0'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX18vfKMTv/P+VNGA9Y2WTKArsdjWL95Fd/4=
set system login user admin authentication encrypted-password '$6$dRqkwl5rKRtrWjZZ$9TcJSAGeTojZZ2lc12nqE3gAFCAYZmaldPqXJVhHsu6q0kAd4eD4frRicRMoR2tsuDr1ehsy7TkVNARkX4GPs.'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$MdWOGlPGlRXvnQSx$pwvEGdP4hBhcrk7/EgrUDvg8ScCyv2dCApwLweBQ83UYpvst7j8QvqWQWjmdDowuoZiD0Ntmz/CiYDiwWdSnm.'
set system login user test authentication encrypted-password '$6$Fbstm0A8uDd3sH8O$Vg0cLzsSc3vVHWktsgF3gYKcwtYfTE5pEEtenxxayvWShLGXs4wFa93sj3t44sto62oEyoHWW/Pfr/o/uXQFb.'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied