Ppk
This set of tests shows how to configure and connect more than two subnets with each other through a VPN tunnel using PPK authentication in different ways.
Test PPK Options
Description
In this test, we will check the different options for PPK authentication (i.e., when it is required or not, when it remains unmatched, etc.).
Scenario
Note
Set default configuration for both DUTs, where PPK is not required and the PPK is the same.
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap carol encrypted-secret U2FsdGVkX19lLQusjIwG/de4Cz/OGUbYdDeeE3MLdU0= set vpn ipsec auth-profile AUTH-SA remote auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA remote auth eap dave encrypted-secret U2FsdGVkX1/jQ8xnFf82VScKApGw6/hYdHBtfosJ8eI= set vpn ipsec auth-profile AUTH-SA remote auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol encrypted-secret U2FsdGVkX183VpqFia+r9Qa/NiWRV0hyvtqsJN6GRjo= set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.029 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.029/0.029/0.029/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.034 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.034/0.034/0.034/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 2062542b3c52ab84_i 68727c5cf54b76d0_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 26761s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3311s, expires in 3959s in c01ae70a, 0 bytes, 0 packets out c3b86b0c, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 6: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.288 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.288/0.288/0.288/0.000 ms
Step 7: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.288 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.288/0.288/0.288/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 2062542b3c52ab84_i 68727c5cf54b76d0_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 26761s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3311s, expires in 3959s in c01ae70a, 168 bytes, 2 packets, 0s ago out c3b86b0c, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Delete the PPK from DUT0 and check that the SA falls back to standard authentication.
Step 9: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org
Step 10: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[1] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[1] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (120 bytes) [ENC] parsed IKE_AUTH request 5 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/ID] [IKE] received EAP identity 'carol' [IKE] phase2 method EAP_MD5 selected [IKE] sending tunneled EAP-TTLS AVP [EAP/REQ/MD5] [ENC] generating IKE_AUTH response 5 [ EAP/REQ/TTLS ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (132 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (132 bytes) [ENC] parsed IKE_AUTH request 6 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/MD5] [IKE] EAP_TTLS phase2 authentication of 'carol' with EAP_MD5 successful [IKE] EAP method EAP_TTLS succeeded, MSK established [ENC] generating IKE_AUTH response 6 [ EAP/SUCC ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (162 bytes) [ENC] parsed IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [CFG] no PPK for 'carol@teldat.org' found, ignored because PPK is not required [IKE] no PPK available, using NO_PPK_AUTH notify [IKE] authentication of 'carol' with EAP successful [IKE] authentication of 'CN=moon.teldat.org' (myself) with EAP [IKE] IKE_SA vpn-peer-PEER[2] established between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] scheduling rekeying in 15582s [IKE] maximum IKE_SA lifetime 18462s [CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ [IKE] CHILD_SA peer-PEER-tunnel-1{2} established with SPIs c48584e3_i c494580d_o and TS 10.1.0.0/24 === 10.2.0.0/24 [ENC] generating IKE_AUTH response 7 [ AUTH SA TSi TSr ] initiate completed successfully
Step 11: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[2] between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[2] [ENC] generating INFORMATIONAL request 8 [ D ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (65 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 8 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] initiating IKE_SA vpn-peer-PEER[3] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{3} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x97) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0x57) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (181 bytes) [ENC] parsed IKE_AUTH response 7 [ AUTH SA TSi TSr ] [IKE] authentication of 'CN=moon.teldat.org' with EAP successful [CFG] peer didn't use PPK for PPK_ID 'carol@teldat.org' [IKE] IKE_SA vpn-peer-PEER[3] established between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] scheduling rekeying in 16997s [IKE] maximum IKE_SA lifetime 19877s [CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ [IKE] CHILD_SA peer-PEER-tunnel-1{3} established with SPIs cd36ed09_i c51addc1_o and TS 10.2.0.0/24 === 10.1.0.0/24 initiate completed successfully
Step 12: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 045b4596010c99e9_i f6b868610bfa78f5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 28766s peer-PEER-tunnel-1: #3, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3370s, expires in 3960s in c51addc1, 0 bytes, 0 packets out cd36ed09, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 13: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.268 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.268/0.268/0.268/0.000 ms
Step 14: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.302 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.302/0.302/0.302/0.000 ms
Step 15: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 045b4596010c99e9_i f6b868610bfa78f5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 28766s peer-PEER-tunnel-1: #3, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3370s, expires in 3960s in c51addc1, 168 bytes, 2 packets, 0s ago out cd36ed09, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Set the PPK as required in DUT0 and, with DUT1’s corresponding PPK deleted, check that the connection fails.
Step 16: Modify the following configuration lines in DUT0 :
set vpn ipsec auth-profile AUTH-SA remote ppk required
Step 17: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[3] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[3] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (120 bytes) [ENC] parsed IKE_AUTH request 5 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/ID] [IKE] received EAP identity 'carol' [IKE] phase2 method EAP_MD5 selected [IKE] sending tunneled EAP-TTLS AVP [EAP/REQ/MD5] [ENC] generating IKE_AUTH response 5 [ EAP/REQ/TTLS ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (132 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (132 bytes) [ENC] parsed IKE_AUTH request 6 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/MD5] [IKE] EAP_TTLS phase2 authentication of 'carol' with EAP_MD5 successful [IKE] EAP method EAP_TTLS succeeded, MSK established [ENC] generating IKE_AUTH response 6 [ EAP/SUCC ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (162 bytes) [ENC] parsed IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [CFG] PPK required but no PPK found for 'carol@teldat.org' [ENC] generating IKE_AUTH response 7 [ N(AUTH_FAILED) ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 18: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[5] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{5} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x8F) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0x31) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 19: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Note
Set the PPK as required in DUT1 and change the PPK in DUT0 back to not required. Check that the connection is still failing.
Step 20: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA remote ppk required
Step 21: Modify the following configuration lines in DUT1 :
set vpn ipsec auth-profile AUTH-SA local ppk required
Step 22: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] unable to resolve %any, initiate aborted initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 23: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[7] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{7} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0xDD) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0xCF) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (122 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 24: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Test PPK EAP-TTLS STS
Description
Test the site-to-site VPN with PPK authentication and EAP-TTLS
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap carol encrypted-secret U2FsdGVkX18ScgxlggVbtt2tPsg5soc+IkWgGBKosI8= set vpn ipsec auth-profile AUTH-SA remote auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA remote auth eap dave encrypted-secret U2FsdGVkX1/diIypAGHMV8TSMfZ+MdX4OXelBphoA5Q= set vpn ipsec auth-profile AUTH-SA remote auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol encrypted-secret U2FsdGVkX18SuGuQ9ITtkoeGC6EyE7D7yXz4B/NE57w= set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.031 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.031/0.031/0.031/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.033 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.033/0.033/0.033/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth eap dave encrypted-secret U2FsdGVkX19GY44D7XYEcj+np4fignpvNisre4Vf5XM= set vpn ipsec auth-profile AUTH-SA local auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA local id dave set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.027 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.027/0.027/0.027/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, aaa4db51c458f450_i 0718f1b829019c33_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 19583s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3413s, expires in 3960s in c59cabf8, 0 bytes, 0 packets out c8aa12ee, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ca174d8903f1910d_i e9f21b63d60ce5bf_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 21836s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3292s, expires in 3956s in c83a9d86, 0 bytes, 0 packets out c53aab95, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.309 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.309/0.309/0.309/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.261 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.261/0.261/0.261/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, aaa4db51c458f450_i 0718f1b829019c33_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 19578s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3408s, expires in 3955s in c59cabf8, 0 bytes, 0 packets out c8aa12ee, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ca174d8903f1910d_i e9f21b63d60ce5bf_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 21831s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3287s, expires in 3951s in c83a9d86, 168 bytes, 2 packets, 1s ago out c53aab95, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, aaa4db51c458f450_i 0718f1b829019c33_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 19578s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3408s, expires in 3955s in c59cabf8, 0 bytes, 0 packets out c8aa12ee, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ca174d8903f1910d_i e9f21b63d60ce5bf_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 21831s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3287s, expires in 3951s in c83a9d86, 168 bytes, 2 packets, 1s ago out c53aab95, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.279 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.279/0.279/0.279/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.290 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.290/0.290/0.290/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, aaa4db51c458f450_i 0718f1b829019c33_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 19578s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3408s, expires in 3955s in c59cabf8, 168 bytes, 2 packets, 0s ago out c8aa12ee, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ca174d8903f1910d_i e9f21b63d60ce5bf_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 21831s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3287s, expires in 3951s in c83a9d86, 168 bytes, 2 packets, 1s ago out c53aab95, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK STS
Description
Test the site-to-site VPN with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1/x5ZfXN8UMUEphiaIdqknCZiYb/E2likE= set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX199LK7/INIlYHFkPANSA9dlGE8rIfJnZQw= set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1+QQtqXrNM2yCYx75lcNNBGkK/9cPXaPC4= set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX1+5D7sONZi8+vKAwpWMy/xYEwyN7Q5M1eY= set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX19retLkpI8+J2U71Wk/RsWBo1F/kVAz+lI= set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX19m8DJ/GEfmTb/RjvNI2t2Vwpnulxa6YHI= set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.029 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.029/0.029/0.029/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 783001df98715dbf_i 4960db5969cd72a0_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 19398s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3354s, expires in 3960s in c1255f68, 0 bytes, 0 packets out c48841bb, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 443ed70e896d8d11_i 91d47c2ade3d9630_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 21261s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 3301s, expires in 3957s in c9cee47b, 0 bytes, 0 packets out c5742311, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.304 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.304/0.304/0.304/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.337 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.337/0.337/0.337/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 783001df98715dbf_i 4960db5969cd72a0_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 19394s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3350s, expires in 3956s in c1255f68, 0 bytes, 0 packets out c48841bb, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 443ed70e896d8d11_i 91d47c2ade3d9630_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 7s ago, rekeying in 21257s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 7s ago, rekeying in 3297s, expires in 3953s in c9cee47b, 168 bytes, 2 packets, 0s ago out c5742311, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 783001df98715dbf_i 4960db5969cd72a0_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 19394s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3350s, expires in 3956s in c1255f68, 0 bytes, 0 packets out c48841bb, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 443ed70e896d8d11_i 91d47c2ade3d9630_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 7s ago, rekeying in 21257s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 7s ago, rekeying in 3297s, expires in 3953s in c9cee47b, 168 bytes, 2 packets, 0s ago out c5742311, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.275 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.275/0.275/0.275/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.286 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.286/0.286/0.286/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 783001df98715dbf_i 4960db5969cd72a0_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 19394s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3350s, expires in 3956s in c1255f68, 168 bytes, 2 packets, 0s ago out c48841bb, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 443ed70e896d8d11_i 91d47c2ade3d9630_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 7s ago, rekeying in 21257s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 7s ago, rekeying in 3297s, expires in 3953s in c9cee47b, 168 bytes, 2 packets, 0s ago out c5742311, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK RSA STS
Description
Test the site-to-site VPN with PPK authentication and RSA
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=carol@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.027 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.027/0.027/0.027/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=dave@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 052cecf03fcc8bd7_i 8f032d244d5d5012_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 17618s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3242s, expires in 3960s in c724e848, 0 bytes, 0 packets out ca66a8f5, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 4ba2cbee54bb9701_i 56d452bb03a45b96_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 24963s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3375s, expires in 3956s in c2f7cdc9, 0 bytes, 0 packets out c6ba6005, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.337 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.337/0.337/0.337/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.278 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.278/0.278/0.278/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 052cecf03fcc8bd7_i 8f032d244d5d5012_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 17614s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3238s, expires in 3956s in c724e848, 0 bytes, 0 packets out ca66a8f5, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 4ba2cbee54bb9701_i 56d452bb03a45b96_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 24959s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3371s, expires in 3952s in c2f7cdc9, 168 bytes, 2 packets, 0s ago out c6ba6005, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 052cecf03fcc8bd7_i 8f032d244d5d5012_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 17614s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3238s, expires in 3956s in c724e848, 0 bytes, 0 packets out ca66a8f5, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 4ba2cbee54bb9701_i 56d452bb03a45b96_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 24959s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3371s, expires in 3952s in c2f7cdc9, 168 bytes, 2 packets, 0s ago out c6ba6005, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.284 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.284/0.284/0.284/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.263 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.263/0.263/0.263/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 052cecf03fcc8bd7_i 8f032d244d5d5012_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 17613s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3237s, expires in 3955s in c724e848, 168 bytes, 2 packets, 0s ago out ca66a8f5, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 4ba2cbee54bb9701_i 56d452bb03a45b96_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 24958s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3370s, expires in 3951s in c2f7cdc9, 168 bytes, 2 packets, 1s ago out c6ba6005, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK DMVPN
Description
Test the DMVPN scenario with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT1 :
set interfaces ethernet eth0 address 80.0.0.2/24 set interfaces tunnel tun0 address 10.0.0.2/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.2 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1/dpY3Xu5CwMCS98f+bD8Rnjsg+xWtc1oI= set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX19LtsQJbT0iwcIzAfFWwc+/pQVBZwp5kQI= set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 2: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 80.0.0.1/24 set interfaces tunnel tun0 address 10.0.0.1/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.1 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 60 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp transport-nat-support set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1+SnRbCpeqA5sECVsIW5lA9gLlSRMynaoI= set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX18UfjoAw817yU37n+WYmBJ1xqW6hLq1pnQ= set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.027 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.027/0.027/0.027/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.035 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.035/0.035/0.035/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, a5eeec944638ced7_i 39bbfae874cfd666_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 56670s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 22089s, expires in 31680s in c9197e48, 0 bytes, 0 packets out cb53d14c, 0 bytes, 0 packets local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]
Step 6: Ping IP address 10.0.0.2 from DUT0:
admin@DUT0$ ping 10.0.0.2 local-address 10.0.0.1 count 1 size 56 timeout 1Show output
PING 10.0.0.2 (10.0.0.2) from 10.0.0.1 : 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.304 ms --- 10.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.304/0.304/0.304/0.000 ms
Step 7: Ping IP address 10.0.0.1 from DUT1:
admin@DUT1$ ping 10.0.0.1 local-address 10.0.0.2 count 1 size 56 timeout 1Show output
PING 10.0.0.1 (10.0.0.1) from 10.0.0.2 : 56(84) bytes of data. 64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.335 ms --- 10.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.335/0.335/0.335/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, a5eeec944638ced7_i 39bbfae874cfd666_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 2s ago, rekeying in 56668s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 2s ago, rekeying in 22087s, expires in 31678s in c9197e48, 448 bytes, 4 packets, 0s ago out cb53d14c, 352 bytes, 3 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]