Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$lUvk2ncohQOwiG5B$nnw/lnpT6rmUIct8fuXcYaKXF263.I2Q4SDoUyqjCakhsRbSAgQ8lF9LKmRIdB8Uh/srV.g50mGvURjp6nCfZ/'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX18s3Qp3FkL4f2QIWTowTXZ1X3ELIhEJWfc=
set system login user admin authentication encrypted-password '$6$8NkLSp3TsQV3jbQU$H3zDfzCxk.b02tvf.RUce.iU0Md/NQJoakCnj4b3AibcpFb/0SQtxPfWB0wLPdWaLD4Sn2PJzWbhDlaxAf67l1'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$CBZfl.wIZTSb2Opt$klxAYOnWILQxavts/M/rCoFTfVMg8ZOa8tlD.jMRdAjNjLvzyGdMaZerBqCPLfOEsupMciwooXnADL.yCUs3t.'
set system login user test authentication encrypted-password '$6$NZie8KMghbpdVP1w$/mDZ8nVwesKFFlv3KyyeNnYNn4Alsd5YKfYTvCv1.Q.C8.Y2ge56WqVRKZjRRt2pK.jKrGQHSaDnCgyN28STI0'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied