Ppk
This set of tests shows how to configure and connect more than two subnets with each other through a VPN tunnel using PPK authentication in different ways.
Test PPK Options
Description
In this test, we will check the different options for PPK authentication (i.e., when it is required or not, when it remains unmatched, etc.).
Scenario
Note
Set default configuration for both DUTs, where PPK is not required and the PPK is the same.
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap carol encrypted-secret U2FsdGVkX1/koCv7ZlTk9ePVyAKP/PF/tGcqJm1r+5s= set vpn ipsec auth-profile AUTH-SA remote auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA remote auth eap dave encrypted-secret U2FsdGVkX1+PrvHFp+8IyXTYASLQiCJBiC0apX54u60= set vpn ipsec auth-profile AUTH-SA remote auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol encrypted-secret U2FsdGVkX196s1d8b28jX6mqrWT5g4r/0rxB5CEI3Ks= set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.034 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.034/0.034/0.034/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.027 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.027/0.027/0.027/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 888d76dc5e0eae5b_i 1157eff8d8a53c11_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 14597s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3461s, expires in 3960s in c8aefff5, 0 bytes, 0 packets out cdb7beed, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 6: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.305 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.305/0.305/0.305/0.000 ms
Step 7: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.313 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.313/0.313/0.313/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 888d76dc5e0eae5b_i 1157eff8d8a53c11_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 14597s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3461s, expires in 3960s in c8aefff5, 168 bytes, 2 packets, 0s ago out cdb7beed, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Delete the PPK from DUT0 and check that the SA falls back to standard authentication.
Step 9: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org
Step 10: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[1] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[1] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] not establishing CHILD_SA peer-PEER-tunnel-1{3} due to existing duplicate {2} with SPIs c46fdc73_i c525914e_o and TS 10.1.0.0/24 === 10.2.0.0/24 initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 11: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[2] between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[2] [ENC] generating INFORMATIONAL request 8 [ D ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (65 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 8 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] initiating IKE_SA vpn-peer-PEER[3] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{3} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x0C) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0xF4) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (181 bytes) [ENC] parsed IKE_AUTH response 7 [ AUTH SA TSi TSr ] [IKE] authentication of 'CN=moon.teldat.org' with EAP successful [CFG] peer didn't use PPK for PPK_ID 'carol@teldat.org' [IKE] IKE_SA vpn-peer-PEER[3] established between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] scheduling rekeying in 25464s [IKE] maximum IKE_SA lifetime 28344s [CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ [IKE] CHILD_SA peer-PEER-tunnel-1{3} established with SPIs c1ada88a_i c6bef89f_o and TS 10.2.0.0/24 === 10.1.0.0/24 initiate completed successfully
Step 12: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, f21def8224a1049b_i 67950e843ccd1721_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 23299s peer-PEER-tunnel-1: #4, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3382s, expires in 3960s in c6bef89f, 0 bytes, 0 packets out c1ada88a, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 13: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.335 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.335/0.335/0.335/0.000 ms
Step 14: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.293 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.293/0.293/0.293/0.000 ms
Step 15: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, f21def8224a1049b_i 67950e843ccd1721_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 1s ago, rekeying in 23298s peer-PEER-tunnel-1: #4, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3381s, expires in 3959s in c6bef89f, 168 bytes, 2 packets, 0s ago out c1ada88a, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Set the PPK as required in DUT0 and, with DUT1’s corresponding PPK deleted, check that the connection fails.
Step 16: Modify the following configuration lines in DUT0 :
set vpn ipsec auth-profile AUTH-SA remote ppk required
Step 17: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[3] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[3] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] unable to resolve %any, initiate aborted initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 18: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[5] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{5} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x84) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0x72) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 19: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Note
Set the PPK as required in DUT1 and change the PPK in DUT0 back to not required. Check that the connection is still failing.
Step 20: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA remote ppk required
Step 21: Modify the following configuration lines in DUT1 :
set vpn ipsec auth-profile AUTH-SA local ppk required
Step 22: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] unable to resolve %any, initiate aborted initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 23: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[7] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{7} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x47) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0x5F) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (122 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 24: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Test PPK EAP-TTLS STS
Description
Test the site-to-site VPN with PPK authentication and EAP-TTLS
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap carol encrypted-secret U2FsdGVkX19/oZsaZcvuBv5miA5m0LGkE/pHFbX79Cw= set vpn ipsec auth-profile AUTH-SA remote auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA remote auth eap dave encrypted-secret U2FsdGVkX19Q70cGsRTezkaifMeyCGz+THQX7PUgtR4= set vpn ipsec auth-profile AUTH-SA remote auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol encrypted-secret U2FsdGVkX19y4jMnF1Dhfodx++TCwpdvTbq4cW9IfNo= set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.037 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth eap dave encrypted-secret U2FsdGVkX1/CfHS38C+YNQzLtm8LVx6eIzw7GkS+H8s= set vpn ipsec auth-profile AUTH-SA local auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA local id dave set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 8c9cf0bf13cd0b50_i b75422409a9783e1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 19935s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3282s, expires in 3960s in cddcfa11, 0 bytes, 0 packets out c94d739b, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 96081b5d1b63eb1a_i 2dda2deeef4198b1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 17629s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3334s, expires in 3956s in c202011f, 0 bytes, 0 packets out cb28d81d, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.349 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.349/0.349/0.349/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.260 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.260/0.260/0.260/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 8c9cf0bf13cd0b50_i b75422409a9783e1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 19931s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3278s, expires in 3956s in cddcfa11, 0 bytes, 0 packets out c94d739b, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 96081b5d1b63eb1a_i 2dda2deeef4198b1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 17625s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3330s, expires in 3952s in c202011f, 168 bytes, 2 packets, 0s ago out cb28d81d, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 8c9cf0bf13cd0b50_i b75422409a9783e1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 19931s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3278s, expires in 3956s in cddcfa11, 0 bytes, 0 packets out c94d739b, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 96081b5d1b63eb1a_i 2dda2deeef4198b1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 17625s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3330s, expires in 3952s in c202011f, 168 bytes, 2 packets, 0s ago out cb28d81d, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.307 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.307/0.307/0.307/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.316 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.316/0.316/0.316/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 8c9cf0bf13cd0b50_i b75422409a9783e1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 19930s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3277s, expires in 3955s in cddcfa11, 168 bytes, 2 packets, 1s ago out c94d739b, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 96081b5d1b63eb1a_i 2dda2deeef4198b1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 17624s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3329s, expires in 3951s in c202011f, 168 bytes, 2 packets, 1s ago out cb28d81d, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK STS
Description
Test the site-to-site VPN with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1/9KifPrRDDrlnRqVM31OAGik8lFRLMiag= set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX18KowVtzX6BRaT/6EPNAGrLoB8C54FFmfQ= set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX18hCraIkOU/9AmskS1IUhRaSNzvvJ9iP60= set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX1/+8hEbRYsMA9nVJuV53tXJflM4fqfUm+k= set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.035 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.035/0.035/0.035/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1/YzWFk++VQgMqD0K42j1ISH6szurKt6aM= set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX1+882oUav/nYJAb44GLyAuEvkZDgnSdt9g= set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, be06abd6c8f25345_i 98c07b5f3baf7681_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 21993s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3253s, expires in 3959s in c709d0c7, 0 bytes, 0 packets out c266f613, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, cc2919650a134fdb_i 351130c51b86b0c8_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 21827s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3362s, expires in 3956s in c4579235, 0 bytes, 0 packets out c61a7b69, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.305 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.305/0.305/0.305/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.273 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.273/0.273/0.273/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, be06abd6c8f25345_i 98c07b5f3baf7681_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 21989s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3249s, expires in 3955s in c709d0c7, 0 bytes, 0 packets out c266f613, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, cc2919650a134fdb_i 351130c51b86b0c8_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 21823s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3358s, expires in 3952s in c4579235, 168 bytes, 2 packets, 0s ago out c61a7b69, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, be06abd6c8f25345_i 98c07b5f3baf7681_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 21989s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3249s, expires in 3955s in c709d0c7, 0 bytes, 0 packets out c266f613, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, cc2919650a134fdb_i 351130c51b86b0c8_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 21823s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3358s, expires in 3952s in c4579235, 168 bytes, 2 packets, 0s ago out c61a7b69, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.291 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.291/0.291/0.291/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.284 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.284/0.284/0.284/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, be06abd6c8f25345_i 98c07b5f3baf7681_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 21988s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3248s, expires in 3954s in c709d0c7, 168 bytes, 2 packets, 0s ago out c266f613, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, cc2919650a134fdb_i 351130c51b86b0c8_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 21822s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3357s, expires in 3951s in c4579235, 168 bytes, 2 packets, 1s ago out c61a7b69, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK RSA STS
Description
Test the site-to-site VPN with PPK authentication and RSA
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=carol@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.030 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.030/0.030/0.030/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=dave@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.029 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.029/0.029/0.029/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 4dc0fbd5fd6eee08_i 7c9a31ad3f925f9b_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 21817s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3320s, expires in 3960s in c1fda4cd, 0 bytes, 0 packets out c593de4e, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 9baaf308b896777e_i b90fd44973b9367f_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 28527s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3477s, expires in 3956s in cbafb805, 0 bytes, 0 packets out c367e2fd, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.263 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.263/0.263/0.263/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.260 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.260/0.260/0.260/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 4dc0fbd5fd6eee08_i 7c9a31ad3f925f9b_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 21812s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3315s, expires in 3955s in c1fda4cd, 0 bytes, 0 packets out c593de4e, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 9baaf308b896777e_i b90fd44973b9367f_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 28522s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3472s, expires in 3951s in cbafb805, 168 bytes, 2 packets, 0s ago out c367e2fd, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 4dc0fbd5fd6eee08_i 7c9a31ad3f925f9b_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 21812s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3315s, expires in 3955s in c1fda4cd, 0 bytes, 0 packets out c593de4e, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 9baaf308b896777e_i b90fd44973b9367f_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 28522s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3472s, expires in 3951s in cbafb805, 168 bytes, 2 packets, 0s ago out c367e2fd, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.264 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.264/0.264/0.264/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.288 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.288/0.288/0.288/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 4dc0fbd5fd6eee08_i 7c9a31ad3f925f9b_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 21812s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3315s, expires in 3955s in c1fda4cd, 168 bytes, 2 packets, 0s ago out c593de4e, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 9baaf308b896777e_i b90fd44973b9367f_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 28522s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3472s, expires in 3951s in cbafb805, 168 bytes, 2 packets, 0s ago out c367e2fd, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK DMVPN
Description
Test the DMVPN scenario with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT1 :
set interfaces ethernet eth0 address 80.0.0.2/24 set interfaces tunnel tun0 address 10.0.0.2/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.2 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX195x7Jz0LhBO2idlGWh1BZEFbG7HiYoJdE= set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX1+XxoCeGXuKZUADOpTYwi9LflvFD7u5mIk= set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 2: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 80.0.0.1/24 set interfaces tunnel tun0 address 10.0.0.1/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.1 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 60 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp transport-nat-support set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1+cWbseghI3ZspkxvyP5ifmYUI0z3qRlVE= set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX18X4Y2ENR9UOn75alBQrOxUJ6sttUWkICg= set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.041 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.041/0.041/0.041/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 11b93560bcd223ce_i c6da26da3f065b07_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 2s ago, rekeying in 74557s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 2s ago, rekeying in 16399s, expires in 31678s in c2104cf7, 232 bytes, 2 packets, 1s ago out c08d5660, 136 bytes, 1 packets, 1s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]
Step 6: Ping IP address 10.0.0.2 from DUT0:
admin@DUT0$ ping 10.0.0.2 local-address 10.0.0.1 count 1 size 56 timeout 1Show output
PING 10.0.0.2 (10.0.0.2) from 10.0.0.1 : 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.300 ms --- 10.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.300/0.300/0.300/0.000 ms
Step 7: Ping IP address 10.0.0.1 from DUT1:
admin@DUT1$ ping 10.0.0.1 local-address 10.0.0.2 count 1 size 56 timeout 1Show output
PING 10.0.0.1 (10.0.0.1) from 10.0.0.2 : 56(84) bytes of data. 64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.333 ms --- 10.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.333/0.333/0.333/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 11b93560bcd223ce_i c6da26da3f065b07_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 74556s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 16398s, expires in 31677s in c2104cf7, 448 bytes, 4 packets, 0s ago out c08d5660, 352 bytes, 3 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]