Ppk
This set of tests shows how to configure and connect more than two subnets with each other through a VPN tunnel using PPK authentication in different ways.
Test PPK Options
Description
In this test, we will check the different options for PPK authentication (i.e., when it is required or not, when it remains unmatched, etc.).
Scenario
Note
Set default configuration for both DUTs, where PPK is not required and the PPK is the same.
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap carol encrypted-secret U2FsdGVkX1+4QaU3eOhhhVvh367l+aw6XXhjYjwtou8= set vpn ipsec auth-profile AUTH-SA remote auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA remote auth eap dave encrypted-secret U2FsdGVkX18Ji3JqMDJpaBboneNTD6LpJpSIOqPRoWQ= set vpn ipsec auth-profile AUTH-SA remote auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol encrypted-secret U2FsdGVkX18gyC8Tq9xS+uoY1KW+xU/U4/gdrAoJamI= set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.034 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.034/0.034/0.034/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.046 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.046/0.046/0.046/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 34aa45dfe5259c4b_i f32643d6941e867e_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 21207s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3263s, expires in 3959s in c53e5fd4, 0 bytes, 0 packets out cde02d97, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 6: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.378 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.378/0.378/0.378/0.000 ms
Step 7: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.442 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.442/0.442/0.442/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 34aa45dfe5259c4b_i f32643d6941e867e_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 21207s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3263s, expires in 3959s in c53e5fd4, 168 bytes, 2 packets, 0s ago out cde02d97, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Delete the PPK from DUT0 and check that the SA falls back to standard authentication.
Step 9: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org
Step 10: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[1] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[1] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (120 bytes) [ENC] parsed IKE_AUTH request 5 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/ID] [IKE] received EAP identity 'carol' [IKE] phase2 method EAP_MD5 selected [IKE] sending tunneled EAP-TTLS AVP [EAP/REQ/MD5] [ENC] generating IKE_AUTH response 5 [ EAP/REQ/TTLS ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (132 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (132 bytes) [ENC] parsed IKE_AUTH request 6 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/MD5] [IKE] EAP_TTLS phase2 authentication of 'carol' with EAP_MD5 successful [IKE] EAP method EAP_TTLS succeeded, MSK established [ENC] generating IKE_AUTH response 6 [ EAP/SUCC ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (162 bytes) [ENC] parsed IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [CFG] no PPK for 'carol@teldat.org' found, ignored because PPK is not required [IKE] no PPK available, using NO_PPK_AUTH notify [IKE] authentication of 'carol' with EAP successful [IKE] authentication of 'CN=moon.teldat.org' (myself) with EAP [IKE] IKE_SA vpn-peer-PEER[2] established between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] scheduling rekeying in 21215s [IKE] maximum IKE_SA lifetime 24095s [CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ [IKE] CHILD_SA peer-PEER-tunnel-1{2} established with SPIs c3650dc9_i c23743f0_o and TS 10.1.0.0/24 === 10.2.0.0/24 [ENC] generating IKE_AUTH response 7 [ AUTH SA TSi TSr ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (181 bytes) initiate completed successfully
Step 11: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[2] between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[2] [ENC] generating INFORMATIONAL request 8 [ D ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (65 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 8 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] initiating IKE_SA vpn-peer-PEER[3] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{3} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x2F) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0xD4) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (181 bytes) [ENC] parsed IKE_AUTH response 7 [ AUTH SA TSi TSr ] [IKE] authentication of 'CN=moon.teldat.org' with EAP successful [CFG] peer didn't use PPK for PPK_ID 'carol@teldat.org' [IKE] IKE_SA vpn-peer-PEER[3] established between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] scheduling rekeying in 22947s [IKE] maximum IKE_SA lifetime 25827s [CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ [IKE] CHILD_SA peer-PEER-tunnel-1{3} established with SPIs cf4e015c_i c0d84e8f_o and TS 10.2.0.0/24 === 10.1.0.0/24 initiate completed successfully
Step 12: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 2d4358d6d7270495_i ccbc565cd09d2e92_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 15615s peer-PEER-tunnel-1: #3, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3436s, expires in 3960s in c0d84e8f, 0 bytes, 0 packets out cf4e015c, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 13: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.344 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.344/0.344/0.344/0.000 ms
Step 14: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.412 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.412/0.412/0.412/0.000 ms
Step 15: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 2d4358d6d7270495_i ccbc565cd09d2e92_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 1s ago, rekeying in 15614s peer-PEER-tunnel-1: #3, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3435s, expires in 3959s in c0d84e8f, 168 bytes, 2 packets, 0s ago out cf4e015c, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Set the PPK as required in DUT0 and, with DUT1’s corresponding PPK deleted, check that the connection fails.
Step 16: Modify the following configuration lines in DUT0 :
set vpn ipsec auth-profile AUTH-SA remote ppk required
Step 17: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[3] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[3] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (162 bytes) [ENC] parsed IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [CFG] PPK required but no PPK found for 'carol@teldat.org' [ENC] generating IKE_AUTH response 7 [ N(AUTH_FAILED) ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 18: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[5] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{5} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x98) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0xE9) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 19: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Note
Set the PPK as required in DUT1 and change the PPK in DUT0 back to not required. Check that the connection is still failing.
Step 20: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA remote ppk required
Step 21: Modify the following configuration lines in DUT1 :
set vpn ipsec auth-profile AUTH-SA local ppk required
Step 22: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] unable to resolve %any, initiate aborted initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 23: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[7] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{7} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x2F) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0xA9) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (122 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 24: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Test PPK EAP-TTLS STS
Description
Test the site-to-site VPN with PPK authentication and EAP-TTLS
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap carol encrypted-secret U2FsdGVkX1/ZCnEM6MWknTLtZpVO2CW2lHCDWl0LyDM= set vpn ipsec auth-profile AUTH-SA remote auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA remote auth eap dave encrypted-secret U2FsdGVkX1+1cnQnxmH5w2V7pVv9WXX531qOiMBTFKs= set vpn ipsec auth-profile AUTH-SA remote auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol encrypted-secret U2FsdGVkX1+F/je7wU9h3Ao9iFgjLRpHKzveOwxd8/U= set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.038 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.090 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.090/0.090/0.090/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth eap dave encrypted-secret U2FsdGVkX19Mo6kcIwcmEwkE0kHclrcVuS6C9iSwbtg= set vpn ipsec auth-profile AUTH-SA local auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA local id dave set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.037 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 3fc7035d26b9e272_i 41bf3ec8893fad70_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 19232s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3239s, expires in 3959s in c77a41f4, 0 bytes, 0 packets out c21ae8d8, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 040af6c05a1f3cd8_i 625f22a1bbe5bd99_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 28074s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3363s, expires in 3952s in c8d380fa, 0 bytes, 0 packets out c1116bf2, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.327 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.327/0.327/0.327/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=6.35 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.346/6.346/6.346/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 3fc7035d26b9e272_i 41bf3ec8893fad70_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 19224s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3231s, expires in 3951s in c77a41f4, 0 bytes, 0 packets out c21ae8d8, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 040af6c05a1f3cd8_i 625f22a1bbe5bd99_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 16s ago, rekeying in 28066s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 16s ago, rekeying in 3355s, expires in 3944s in c8d380fa, 168 bytes, 2 packets, 0s ago out c1116bf2, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 3fc7035d26b9e272_i 41bf3ec8893fad70_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 19224s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3231s, expires in 3951s in c77a41f4, 0 bytes, 0 packets out c21ae8d8, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 040af6c05a1f3cd8_i 625f22a1bbe5bd99_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 16s ago, rekeying in 28066s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 16s ago, rekeying in 3355s, expires in 3944s in c8d380fa, 168 bytes, 2 packets, 0s ago out c1116bf2, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=1.59 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 1.590/1.590/1.590/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.885 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.885/0.885/0.885/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 3fc7035d26b9e272_i 41bf3ec8893fad70_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 19223s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3230s, expires in 3950s in c77a41f4, 168 bytes, 2 packets, 0s ago out c21ae8d8, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 040af6c05a1f3cd8_i 625f22a1bbe5bd99_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 17s ago, rekeying in 28065s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 17s ago, rekeying in 3354s, expires in 3943s in c8d380fa, 168 bytes, 2 packets, 1s ago out c1116bf2, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK STS
Description
Test the site-to-site VPN with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1/zc4kJ81Uk4vRZbJjdnwFdi1azjnyUxwY= set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX1/7Ee9X2cvENM3NKH/H5Acn8WjlOqEjaWI= set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX18vEdMMdXPyfKqACj18mXOwu9W59vCATO8= set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX19Z3qQHrsiim2zod4dA07mKZBS2gmCuQKA= set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.043 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.043/0.043/0.043/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.050 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.050/0.050/0.050/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX1+j4FeWAgLg3LI5B5TcyfnO0FLZVJUQJ48= set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX1/+YBo4clqvTpmxXzN+GP8HbfYrvgqUasI= set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.041 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.041/0.041/0.041/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 60d40c6e7b586ea8_i 0c35e8600b228ec8_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 26802s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3268s, expires in 3960s in c8788045, 0 bytes, 0 packets out ca454024, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ac6a0d0fa3cf5328_i 7aaccf16b643c26e_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 7s ago, rekeying in 19580s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 7s ago, rekeying in 3442s, expires in 3953s in cb61da7f, 0 bytes, 0 packets out c61dad43, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.352 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.352/0.352/0.352/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.439 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.439/0.439/0.439/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 60d40c6e7b586ea8_i 0c35e8600b228ec8_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 26793s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3259s, expires in 3951s in c8788045, 0 bytes, 0 packets out ca454024, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ac6a0d0fa3cf5328_i 7aaccf16b643c26e_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 16s ago, rekeying in 19571s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 16s ago, rekeying in 3433s, expires in 3944s in cb61da7f, 168 bytes, 2 packets, 0s ago out c61dad43, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 60d40c6e7b586ea8_i 0c35e8600b228ec8_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 26793s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3259s, expires in 3951s in c8788045, 0 bytes, 0 packets out ca454024, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ac6a0d0fa3cf5328_i 7aaccf16b643c26e_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 16s ago, rekeying in 19571s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 16s ago, rekeying in 3433s, expires in 3944s in cb61da7f, 168 bytes, 2 packets, 0s ago out c61dad43, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.394 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.394/0.394/0.394/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.378 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.378/0.378/0.378/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 60d40c6e7b586ea8_i 0c35e8600b228ec8_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 26792s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3258s, expires in 3950s in c8788045, 168 bytes, 2 packets, 0s ago out ca454024, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ac6a0d0fa3cf5328_i 7aaccf16b643c26e_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 17s ago, rekeying in 19570s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 17s ago, rekeying in 3432s, expires in 3943s in cb61da7f, 168 bytes, 2 packets, 1s ago out c61dad43, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK RSA STS
Description
Test the site-to-site VPN with PPK authentication and RSA
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=carol@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.033 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.033/0.033/0.033/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.032 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.032/0.032/0.032/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set protocols static route 10.215.168.0/24 next-hop 10.215.168.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=dave@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.105 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.105/0.105/0.105/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, e3f3a07fc1c263de_i 8836c27806b7d988_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 23607s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3307s, expires in 3960s in c44f41f4, 0 bytes, 0 packets out c2c02881, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 639663c2673933cc_i 0c779e5d39e34549_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 14443s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3275s, expires in 3954s in c9c0e250, 0 bytes, 0 packets out c2aab525, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=8.55 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 8.554/8.554/8.554/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.317 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.317/0.317/0.317/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, e3f3a07fc1c263de_i 8836c27806b7d988_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 23599s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3299s, expires in 3952s in c44f41f4, 0 bytes, 0 packets out c2c02881, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 639663c2673933cc_i 0c779e5d39e34549_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 14s ago, rekeying in 14435s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 14s ago, rekeying in 3267s, expires in 3946s in c9c0e250, 168 bytes, 2 packets, 0s ago out c2aab525, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, e3f3a07fc1c263de_i 8836c27806b7d988_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 23599s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3299s, expires in 3952s in c44f41f4, 0 bytes, 0 packets out c2c02881, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 639663c2673933cc_i 0c779e5d39e34549_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 14s ago, rekeying in 14435s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 14s ago, rekeying in 3267s, expires in 3946s in c9c0e250, 168 bytes, 2 packets, 0s ago out c2aab525, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.510 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.510/0.510/0.510/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.329 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.329/0.329/0.329/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, e3f3a07fc1c263de_i 8836c27806b7d988_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 23598s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3298s, expires in 3951s in c44f41f4, 168 bytes, 2 packets, 1s ago out c2c02881, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 639663c2673933cc_i 0c779e5d39e34549_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 15s ago, rekeying in 14434s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 15s ago, rekeying in 3266s, expires in 3945s in c9c0e250, 168 bytes, 2 packets, 1s ago out c2aab525, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK DMVPN
Description
Test the DMVPN scenario with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT1 :
set interfaces ethernet eth0 address 80.0.0.2/24 set interfaces tunnel tun0 address 10.0.0.2/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.2 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX19BQMK9m0QafcpHdy5HwFjsfd138fiEoRk= set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX1+baGTAizncpWks+lrToRshJ9AnsS63Eho= set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 2: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 80.0.0.1/24 set interfaces tunnel tun0 address 10.0.0.1/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.1 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 60 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp transport-nat-support set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth encrypted-pre-shared-secret U2FsdGVkX18l7n4ykMND4c4ZxjFGJXtlbg6+eEJ3MZs= set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth encrypted-pre-shared-secret U2FsdGVkX1/l3Gz6S+RORjiH6Ncaom3s9hEYCtIGrSU= set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.038 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 951a5399433fe346_i a39bc128b0686186_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 61290s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 16115s, expires in 31679s in c47cb6bf, 116 bytes, 1 packets, 1s ago out c959019c, 0 bytes, 0 packets local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]
Step 6: Ping IP address 10.0.0.2 from DUT0:
admin@DUT0$ ping 10.0.0.2 local-address 10.0.0.1 count 1 size 56 timeout 1Show output
PING 10.0.0.2 (10.0.0.2) from 10.0.0.1 : 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.479 ms --- 10.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.479/0.479/0.479/0.000 ms
Step 7: Ping IP address 10.0.0.1 from DUT1:
admin@DUT1$ ping 10.0.0.1 local-address 10.0.0.2 count 1 size 56 timeout 1Show output
PING 10.0.0.1 (10.0.0.1) from 10.0.0.2 : 56(84) bytes of data. 64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.508 ms --- 10.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.508/0.508/0.508/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 951a5399433fe346_i a39bc128b0686186_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 61288s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 16113s, expires in 31677s in c47cb6bf, 448 bytes, 4 packets, 0s ago out c959019c, 352 bytes, 3 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]