Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$R1CgAvfQYHAgYzq8$PZKre6rsx3EJUBBhNjjHXacByNmffjRjUd8PY6u4qZM4LmG28yvFcnnp88omZd6aUIquxi2X8u3A9BqRsVi/7/'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX18UPcQoo+Nc0R2qnMGnJwxaKHTYtO6l/c4=
set system login user admin authentication encrypted-password '$6$rmcea5zsXC6hwU/V$W0bO/wknk8No5/5pYY91GrUZIvwoaJnjEIKrKyohEqw55Zjgk.WzCpeevfbrLlZNmjKKifvyxp7LDQDAYGLaY0'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$IDDXdSDar3h/99K8$fCvNdSnd0Z6mXPQgClE5ddjOpOKh1EtrkdLHb6whFZaNRc1IzifTVa02aholHUxLL3QYTbVB50ZZ/WVtOK8f81'
set system login user test authentication encrypted-password '$6$veclk4GwDTiEZhrR$i/Cdmdqmei319yFqZLs9zqjSgz0ZXnVY85qta32xaefVN6I2gqe..H7OIMsV2anIbjwSNTYrLHQ1uRFj/.7kL.'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied