Check Roles

This scenario shows how to configure and use OSDx user roles.

Test Monitor Role

Description

A new user teldat is created using the predefined monitor role. This kind of role allows the execution of a reduced set of operational commands.

Scenario

Step 1: Set the following configuration in DUT0 :

set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set system login user teldat authentication encrypted-password '$6$Uo10Mi7XepJPmzGp$rUn7X4fncWD/sYj97mWBBcmx67kSPQGjLVNidDC5FFW8QAeoUoIV8oY50v6cS5l/PO2UdEbBrpdKw1c8k6qKm1'
set system login user teldat role monitor

Step 2: Run command service cnm restart at DUT0 and expect this output:

Step 3: Run command show running at DUT0 and expect this output:

Step 4: Run command show date at DUT0 and expect this output:

Step 5: Login as admin user on DUT0.

Note

Dynamically change the required user-level for some specific operational commands.

Step 6: Modify the following configuration lines in DUT0 :

set user-level 0 command 'show running'
set user-level 10 command 'show date'

Step 7: Run command service cnm restart at DUT0 and expect this output:

Step 8: Run command show running at DUT0 and expect this output:

Step 9: Run command show date at DUT0 and expect this output:

Step 10: Login as admin user on DUT0.

Test Operator Role

Description

A new user teldat is created using the predefined operator role. This kind of role allows the execution of some operational commands.

Scenario

Step 1: Set the following configuration in DUT0 :

set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set system login user teldat authentication encrypted-password '$6$GQ4nj2UqsF9M3.E/$3yDvij4z7gkw7Li6excSg45LuKB9fhf94ETtcUhzGFv9TvLzlaZ1xnMmXxbbzOi.k3I6TRfrM3YKbbGuKAMEO/'
set system login user teldat role operator

Step 2: Run command service cnm restart at DUT0 and expect this output:

Step 3: Run command show running at DUT0 and expect this output:

Step 4: Run command show date at DUT0 and expect this output:

Step 5: Login as admin user on DUT0.

Note

Dynamically change the required user-level for some specific operational commands.

Step 6: Modify the following configuration lines in DUT0 :

set user-level 0 command 'show running'
set user-level 10 command 'show date'

Step 7: Run command service cnm restart at DUT0 and expect this output:

Step 8: Run command show running at DUT0 and expect this output:

Step 9: Run command show date at DUT0 and expect this output:

Step 10: Login as admin user on DUT0.

Test Admin Role

Description

A new user teldat is created using the predefined admin role. This kind of role allows the execution of all operational commands and has access to the configuration menu.

Scenario

Step 1: Set the following configuration in DUT0 :

set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set system login user teldat authentication encrypted-password '$6$W/.i0b5bXL6VgUL/$qwfosGCItkUVD8oEsybKBD4WroXnKLB5GKR3UHEvqFzWq/oWUi8UqyYYxFzLB6.1p2rKvSKMuXmiAnapICbz90'
set system login user teldat role admin

Step 2: Run command service cnm restart at DUT0 and expect this output:

Step 3: Run command show running at DUT0 and expect this output:

Step 4: Run command show date at DUT0 and expect this output:

Step 5: Login as admin user on DUT0.

Note

Dynamically change the required user-level for some specific operational commands.

Step 6: Modify the following configuration lines in DUT0 :

set user-level 0 command 'show running'
set user-level 10 command 'show date'

Step 7: Run command service cnm restart at DUT0 and expect this output:

Step 8: Run command show running at DUT0 and expect this output:

Step 9: Run command show date at DUT0 and expect this output:

Step 10: Login as admin user on DUT0.

Test Custom Role

Description

A new user teldat is created using a custom role. The user-level can be dynamically changed.

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role custom_role level 8
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set system login user teldat authentication encrypted-password '$6$Aas2b6hLtghOTcdq$X.Lr6UXE.PIGYxY0WtdpJZbjYUy7Ht.EAsSukZMX4k3rSxM0/5/3P66/APvvoIBkS7WCL5LScTsF8EA7vDauv.'
set system login user teldat role custom_role

Step 2: Run command service cnm restart at DUT0 and expect this output:

Step 3: Run command show running at DUT0 and expect this output:

Step 4: Run command show date at DUT0 and expect this output:

Step 5: Login as admin user on DUT0.

Step 6: Modify the following configuration lines in DUT0 :

set system login role custom_role level 14

Step 7: Run command service cnm restart at DUT0 and expect this output:

Step 8: Run command show running at DUT0 and expect this output:

Step 9: Run command show date at DUT0 and expect this output:

Step 10: Login as admin user on DUT0.

Step 11: Modify the following configuration lines in DUT0 :

set system login role custom_role level 3

Step 12: Run command service cnm restart at DUT0 and expect this output:

Step 13: Run command show running at DUT0 and expect this output:

Step 14: Run command show date at DUT0 and expect this output:

Step 15: Login as admin user on DUT0.