Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$454lvMBQon6aNzOi$TFiCIfq4IJZKHrIbB4jkCNSw/iSt7Q7yP5rQloRcZGmfg3z5dsaIwSKQ0LTCYYWu5EjiGwwALZi1FpsgnPfuW.'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX18tvDQH+n9tHIdbEo6nlq8g1GR+md6OOLA=
set system login user admin authentication encrypted-password '$6$khOfVkpzwaaW.GGY$m3XhOLl/LK6/DU7kv.Ix3UURA2XfloWjEAE3JgKQRChXCr1L7hHBl4Hg2j34NwdxQBdHSl3dn9eyZdtzxlTHs/'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$TVnJFFDPR0tNVljS$Wz9HPYq1na2JiZPLtvWfkeaRvwv7tx4CRsvL.l5VIXZQbmvDFWJSEfdJclqeN.PHv4yVb2OUSxS1p9hS2yt4.1'
set system login user test authentication encrypted-password '$6$IXb0wEtpgg0SGUL6$FXfE1gili/RmhdQcVWfPkV9/zegFvZNLmFpf1JfPULwXzk7/L0HbRdwhuhIUr9psjn0h6uUyUCL8QRizCZ2qa0'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied