Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$W/dtj52F9cupV69b$LWXYEjELitAINNlTE9iqCfemp2a.atoSYMdjwFPMQIl14cw7vWqzT5IrDafxYYgoktg7KzWCdGWqGqUHSk9f00'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX19oAIrhVwh72+hS01ZTsvIN2kGTxAGFhfw=
set system login user admin authentication encrypted-password '$6$EDOuejo57GDM68CG$e0pGSZ3gdvdW.Y7pmhSWWWPxEsvqvj/OzQac3ILS8/AWJF44/GRNpF9BQT2goAYIhoFFvnOL/mnjQdYoAFEYr0'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$H5hPJE.bLnLDyqN2$9BEjSKiT6GDe.rCe1flBSWFVd0vXclQ1plWOv/Zutbpkz1ebpSBLdRWZNG8t3QmRXL1qrGV5zlFQh8eI2sv/n.'
set system login user test authentication encrypted-password '$6$W5Y/cDxqOYwhtN1z$UHeJMykj.jjdbvT6KofItPYGyJ3PdpCtYr1mA/ynJFJbSVPtmLvUc2kWZa6z.7ozbdXEjFwsWrXmVj6RSQv81.'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied