Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$jceXBuJa.hzm2qXb$DRvB7GN4w2P2G86S5D/5mFXw02kbRsCQsaFtNKXwsoO98IKPjt0SDvOTPCsbPkDs.dCuk/eMTFStzK5tAFuNz0'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX18z+wlpfGlRC/+kSAIWW9BiytWwcDhzBeQ=
set system login user admin authentication encrypted-password '$6$Nrhky4cMTBRfnePZ$8a5fR.2Kd6uKH5LnwW1kozwkxb7tXTlJHLKSdeoq9eJ.sMmLetKrTt47CxVCr5.fLYwbHKz5d1ZoDHtkISg7D0'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$Ec6CxqZbyryibu5K$pBEDqpZyQ4icZzrWsSaT9h2TwJ8.4z4uMT5RGhTQnI6jvQYWY1AWa0zOaA4LZVc3rWjqXdTM6ept6eRpfUQmw0'
set system login user test authentication encrypted-password '$6$vC6OsCT8msjwyI1.$ye3/6sO4j0sotRgAmJUEzNdub49JT3h4nElLibIqvV.qk6nH.TEH8rDusw6d2Zq3mfdOsKIHHntl9P8NAm8/H/'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied