Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$XQwYWqN6tRHG6lu4$fRfhyZsvrJmDnYH7h4MkbbFHaeMKYS0/O7i77CjBnW23a4Oia/KV7UQ8a/85VTa2Z0EJ6eczRSUEbVvsvKic.0'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX1/iQgskE3eQwNuVEuHxSewX9m/aRlmWn4M=
set system login user admin authentication encrypted-password '$6$/Q1FC7rkE4DuPr12$BoN9mT/SelCjiZaz3vfyEe6LQAzKeIFPHa5FrNdKdO.zelX4XgipBYW1pWPzY9NQ2nrFPzNM4Mbwx3m0LBlOl0'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$j4Qb.RK7iDRG3nc/$NK7UPh5eP7NhRAz8Smscvu.3Qa8kWXBdZztAgEJvxOPYBfuuZq7fLlby.0jHDrUUjjKCNefqZF0apD6cQuJ.j/'
set system login user test authentication encrypted-password '$6$jJNClxQapPGwCd1a$RkW5LIa6pgcPjvefm8BSoZl2Dt8rnXEKN11ChVX.WKG0CNrvxNFH2Y4SSIMXDtFleaTwS.DH6yyCSVk7DvjAz.'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied