Acl Id
This scenario shows how to install traffic policies from received RADIUS messages (using Filter-Id attribute and according to RFC2865).
Test 802.1x Filter-ID ACL
Description
DUT0 is configured with an 802.1x authenticated interface and DUT1 is configured as a supplicant. A traffic policy is automatically configured in DUT0 after supplicant is authenticated.
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth1 802.1x authenticator aaa authentication list1 set interfaces ethernet eth1 802.1x authenticator aaa authorization acl-alias RADIUS_ACL direction both set interfaces ethernet eth1 802.1x authenticator aaa authorization acl-alias RADIUS_ACL priority very-high set interfaces ethernet eth1 802.1x authenticator aaa authorization acl-alias RADIUS_ACL traffic-policy POL1 set interfaces ethernet eth1 802.1x authenticator reauth-period 0 set interfaces ethernet eth1 address 192.168.100.1/24 set service ssh set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 encrypted-key U2FsdGVkX1+TIqwit5PqdQDmDJ1/ecS4bvgt57mAzZJiWqsq2Nokjk5T2p7NMEDBCQ8EmiO3WRhd92ihIkUGLg== set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set traffic policy POL1 rule 1 selector SEL_ICMP set traffic policy POL1 rule 2 selector SEL_SSH set traffic policy POL1 rule 3 action drop set traffic selector SEL_ICMP rule 1 protocol icmp set traffic selector SEL_SSH rule 1 destination port 22 set traffic selector SEL_SSH rule 1 protocol tcp set traffic selector SEL_SSH rule 2 protocol tcp set traffic selector SEL_SSH rule 2 source port 22
Step 2: Ping IP address 10.215.168.1 from DUT0:
admin@DUT0$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.210 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.210/0.210/0.210/0.000 ms
Step 3: Set the following configuration in DUT1 :
set interfaces ethernet eth1 802.1x supplicant encrypted-password U2FsdGVkX1/w4mt3XddZsGtuN9zJixGy2YrIcLFmSFo= set interfaces ethernet eth1 802.1x supplicant username user_acl_id set interfaces ethernet eth1 address 192.168.100.2/24 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 4: Run command interfaces ethernet eth1 802.1x supplicant show status at DUT1 and check if output contains the following tokens:
AuthorizedShow output
--------------------------------------------------- Field Value --------------------------------------------------- EAP State SUCCESS EAP TLS Cipher ECDHE-RSA-AES256-GCM-SHA384 EAP TLS Version TLSv1.2 PAE State AUTHENTICATED Supplicant Port Status Authorized WPA State COMPLETED
Step 5: Run command interfaces ethernet eth1 802.1x supplicant show stats at DUT1 and check if output matches the following regular expressions:
Port Status\s+AuthorizedShow output
------------------------------- Field Value ------------------------------- EAPoL Frames (Rx) 11 EAPoL Frames (Tx) 11 Invalid Frames (Rx) 0 Logoff Frames (Tx) 0 Port Status Authorized Req Frames (Rx) 9 Req ID Frames (Rx) 1 Resp Frames (Tx) 10 Start Frames (Tx) 1
Step 6: Run command interfaces ethernet eth1 802.1x authenticator show stats at DUT0 and check if output matches the following regular expressions:
Authentication Successes\s+1Show output
------------------------------------- Field Value ------------------------------------- Access Challenges 9 Authentication Backend RADIUS Authentication Failures 0 Authentication Successes 1 EAPoL frames (Rx) 11 EAPoL frames (Tx) 11 Reauthenticate FALSE Reauthenticate Period 0 Session Time 0 Session User Name user_acl_id
Step 7: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.409 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.409/0.409/0.409/0.000 ms
Step 8: Run command interfaces ethernet eth1 802.1x authenticator show acl rules at DUT0 and expect this output:
Show output
Received ACL type: Filter-ID. ACL with alias 'RADIUS_ACL' is installed using 'traffic policy POL1'.
Step 9: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.256 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.256/0.256/0.256/0.000 ms
Step 10: Init an SSH connection from DUT1 to IP address 192.168.100.1 with the user admin:
admin@DUT1$ ssh admin@192.168.100.1 option StrictHostKeyChecking=no option UserKnownHostsFile=/dev/nullShow output
Warning: Permanently added '192.168.100.1' (ECDSA) to the list of known hosts. admin@192.168.100.1's password: Welcome to Teldat OSDx v4.2.7.0 This system includes free software. Contact Teldat for licenses information and source code. Last login: Fri Oct 10 19:54:07 2025 from 192.168.100.2 admin@osdx$
Step 11: Expect a failure in the following command:
Initiate a udp connection from DUT0 to DUT1 and try to send some messages between both endpoints
admin@DUT1$ monitor test connection server 4321 udp admin@DUT0$ monitor test connection client 192.168.100.2 4321 udp
Step 12: Run command interfaces ethernet eth1 802.1x authenticator show acl stats at DUT0 and expect this output:
Show output
Policy POL1 -- ifc eth1 -- hook in prio very-high --------------------------------------------------------------- rule selector pkts match pkts eval bytes match bytes eval --------------------------------------------------------------- 1 SEL_ICMP 2 27 168 5252 2 SEL_SSH 25 25 5084 5084 3 - 0 0 0 0 --------------------------------------------------------------- Total 27 27 5252 5252 Policy POL1 -- ifc eth1 -- hook out prio very-high --------------------------------------------------------------- rule selector pkts match pkts eval bytes match bytes eval --------------------------------------------------------------- 1 SEL_ICMP 2 23 168 5056 2 SEL_SSH 20 21 4840 4888 3 - 1 1 48 48 --------------------------------------------------------------- Total 23 23 5056 5056
Test 802.1x Filter-ID ACL And CoA
Description
In this scenario, DUT1 is successfully authenticated and a traffic policy is configured from a Filter-ID attribute. Then, a CoA message is received from the authentication server that changes the configured traffic policy to drop non-ICMP traffic.
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 10.215.168.64/24 set interfaces ethernet eth1 802.1x authenticator aaa authentication list1 set interfaces ethernet eth1 802.1x authenticator aaa authorization acl-alias RADIUS_ACL direction both set interfaces ethernet eth1 802.1x authenticator aaa authorization acl-alias RADIUS_ACL priority very-high set interfaces ethernet eth1 802.1x authenticator aaa authorization acl-alias RADIUS_ACL traffic-policy POL1 set interfaces ethernet eth1 802.1x authenticator aaa authorization acl-alias RADIUS_ACL_COA direction in set interfaces ethernet eth1 802.1x authenticator aaa authorization acl-alias RADIUS_ACL_COA traffic-policy POL2 set interfaces ethernet eth1 802.1x authenticator coa client 10.215.168.1 set interfaces ethernet eth1 802.1x authenticator coa encrypted-secret U2FsdGVkX1+QFSkre5kAM6QqZi9Hcrvvwfs7NNUtiFE= set interfaces ethernet eth1 802.1x authenticator reauth-period 0 set interfaces ethernet eth1 address 192.168.100.1/24 set service ssh set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 encrypted-key U2FsdGVkX1/WST9vfqo7Z5xBTlXAF3B0GZKXwLYKjh5HSk4l/VDXNaUeEnTJMfDZg7T25yXclgAYSXWWpycXdQ== set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set traffic policy POL1 rule 1 selector SEL_ICMP set traffic policy POL1 rule 2 selector SEL_SSH set traffic policy POL1 rule 3 action drop set traffic policy POL2 rule 1 selector SEL_ICMP set traffic policy POL2 rule 2 action drop set traffic selector SEL_ICMP rule 1 protocol icmp set traffic selector SEL_SSH rule 1 destination port 22 set traffic selector SEL_SSH rule 1 protocol tcp set traffic selector SEL_SSH rule 2 protocol tcp set traffic selector SEL_SSH rule 2 source port 22
Step 2: Ping IP address 10.215.168.1 from DUT0:
admin@DUT0$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.216 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.216/0.216/0.216/0.000 ms
Step 3: Set the following configuration in DUT1 :
set interfaces ethernet eth1 802.1x supplicant encrypted-password U2FsdGVkX19PrpQqjS839+NDfUjdsgPVfKM7yG+W2Mg= set interfaces ethernet eth1 802.1x supplicant username user_acl_id set interfaces ethernet eth1 address 192.168.100.2/24 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 4: Run command interfaces ethernet eth1 802.1x supplicant show status at DUT1 and check if output contains the following tokens:
AuthorizedShow output
--------------------------------------------------- Field Value --------------------------------------------------- EAP State SUCCESS EAP TLS Cipher ECDHE-RSA-AES256-GCM-SHA384 EAP TLS Version TLSv1.2 PAE State AUTHENTICATED Supplicant Port Status Authorized WPA State COMPLETED
Step 5: Run command interfaces ethernet eth1 802.1x supplicant show stats at DUT1 and check if output matches the following regular expressions:
Port Status\s+AuthorizedShow output
------------------------------- Field Value ------------------------------- EAPoL Frames (Rx) 11 EAPoL Frames (Tx) 11 Invalid Frames (Rx) 0 Logoff Frames (Tx) 0 Port Status Authorized Req Frames (Rx) 9 Req ID Frames (Rx) 1 Resp Frames (Tx) 10 Start Frames (Tx) 1
Step 6: Run command interfaces ethernet eth1 802.1x authenticator show stats at DUT0 and check if output matches the following regular expressions:
Authentication Successes\s+1Show output
------------------------------------- Field Value ------------------------------------- Access Challenges 9 Authentication Backend RADIUS Authentication Failures 0 Authentication Successes 1 EAPoL frames (Rx) 11 EAPoL frames (Tx) 11 Reauthenticate FALSE Reauthenticate Period 0 Session Time 0 Session User Name user_acl_id
Step 7: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.379 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.379/0.379/0.379/0.000 ms
Note
Send a CoA/Disconnect request from the RADIUS server
On Linux, the FreeRADIUS package includes the utility
radtest that can be used to send these messages:
Show output
$ cat /osdx-tests/utils/dot1x/acl_id.req User-Name = "user_acl_id" Filter-ID = "RADIUS_ACL_COA" $ radclient -s -t 1 -r 1 10.215.168.64:3799 coa coa_secret -f /osdx-tests/utils/dot1x/acl_id.req Sent CoA-Request Id 87 from 0.0.0.0:36218 to 10.215.168.64:3799 length 49 Received CoA-ACK Id 87 from 10.215.168.64:3799 to 10.215.168.1:36218 length 44 Packet summary: Accepted : 1 Rejected : 0 Lost : 0 Passed filter : 1 Failed filter : 0
Step 8: Run command interfaces ethernet eth1 802.1x authenticator show acl rules at DUT0 and expect this output:
Show output
Received ACL type: Filter-ID. ACL with alias 'RADIUS_ACL_COA' is installed using 'traffic policy POL2'.
Step 9: Ping IP address 192.168.100.1 from DUT1:
admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.222 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.222/0.222/0.222/0.000 ms
Step 10: Init an SSH connection from DUT1 to IP address 192.168.100.1 with the user admin:
admin@DUT1$ ssh admin@192.168.100.1 option StrictHostKeyChecking=no option UserKnownHostsFile=/dev/null
Step 11: Run command interfaces ethernet eth1 802.1x authenticator show acl stats at DUT0 and expect this output:
Show output
Policy POL2 -- ifc eth1 -- hook in prio very-high --------------------------------------------------------------- rule selector pkts match pkts eval bytes match bytes eval --------------------------------------------------------------- 1 SEL_ICMP 1 6 84 384 2 - 5 5 300 300 --------------------------------------------------------------- Total 6 6 384 384