Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$5p2KDnrd8H4pHHhr$XLVoYypcDtLlp9o/Tl2tzHP.RALhE2r0CiVggQQNug1Uhn79zgCBF18sk0tt48AaMJ1L5V4IkZNEV8Sx//NM9.'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX180EY6shGnLJi/6Hl926gPLXeJWDu5x/E0=
set system login user admin authentication encrypted-password '$6$HrbgvLIaykRQPKca$WfBtzTD7hCoRKvnrVeXi1WfkFN1YQGDVNbQCa/SDHcSNjV5am4WSA74Xipu46lQhExLo0RuDoPOqxd9TVr0nk1'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$YNchsFJq7ECw0CWI$ASjXoGkqnAZTwZrFAQ0QjEgXv9ZhNqcgUdPEvVdSwwNcOvcRtLSZ8U45dFn3cCMSl9In2.sa048GV6rierIGZ0'
set system login user test authentication encrypted-password '$6$x2KQr7Na673ltlLI$Q1mDFnG2u5bk7F4P9YOp2PnRRnrZlVJQ5HGHjAC9ka/ZXZjWLAWQx7waHt.L5OPwPnCPqbyAYkfDtJ3Ru8xQo0'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied