Ppk
This set of tests shows how to configure and connect more than two subnets with each other through a VPN tunnel using PPK authentication in different ways.
Test PPK Options
Description
In this test, we will check the different options for PPK authentication (i.e., when it is required or not, when it remains unmatched, etc.).
Scenario
Note
Set default configuration for both DUTs, where PPK is not required and the PPK is the same.
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX1/yFb5xq+DNy9x/INYOtBHroi80VUtDrnI= set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX19OzihrfJNV+gDkb4RkvnZcjb209J6RXzU= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap %any type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX183GFc0BSUPtplrShoY1fkAYZymLoOioIQ= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.024 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.024/0.024/0.024/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 3341756139936f17_i e5c30f304def659c_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 27698s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3406s, expires in 3959s in c2813e24, 0 bytes, 0 packets out c031a9a4, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 6: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.266 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.266/0.266/0.266/0.000 ms
Step 7: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.285 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.285/0.285/0.285/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 3341756139936f17_i e5c30f304def659c_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 27698s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3406s, expires in 3959s in c2813e24, 168 bytes, 2 packets, 0s ago out c031a9a4, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Delete the PPK from DUT0 and check that the SA falls back to standard authentication.
Step 9: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org
Step 10: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[1] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[1] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (229 bytes) [ENC] parsed IKE_AUTH request 4 [ EAP/RES/TTLS ] [ENC] generating IKE_AUTH response 4 [ EAP/REQ/TTLS ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (122 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (120 bytes) [ENC] parsed IKE_AUTH request 5 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/ID] [IKE] received EAP identity 'carol' [IKE] phase2 method EAP_MD5 selected [IKE] sending tunneled EAP-TTLS AVP [EAP/REQ/MD5] [ENC] generating IKE_AUTH response 5 [ EAP/REQ/TTLS ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (132 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (132 bytes) [ENC] parsed IKE_AUTH request 6 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/MD5] [IKE] EAP_TTLS phase2 authentication of 'carol' with EAP_MD5 successful [IKE] EAP method EAP_TTLS succeeded, MSK established [ENC] generating IKE_AUTH response 6 [ EAP/SUCC ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (162 bytes) [ENC] parsed IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [CFG] no PPK for 'carol@teldat.org' found, ignored because PPK is not required [IKE] no PPK available, using NO_PPK_AUTH notify [IKE] authentication of 'carol' with EAP successful [IKE] authentication of 'CN=moon.teldat.org' (myself) with EAP [IKE] IKE_SA vpn-peer-PEER[2] established between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] scheduling rekeying in 21294s [IKE] maximum IKE_SA lifetime 21294s [CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ [IKE] CHILD_SA peer-PEER-tunnel-1{2} established with SPIs c7497a5b_i cb61c7e7_o and TS 10.1.0.0/24 === 10.2.0.0/24 initiate completed successfully
Step 11: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[2] between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[2] [ENC] generating INFORMATIONAL request 8 [ D ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (65 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 8 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] initiating IKE_SA vpn-peer-PEER[3] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{3} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x3B) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0xE9) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (181 bytes) [ENC] parsed IKE_AUTH response 7 [ AUTH SA TSi TSr ] [IKE] authentication of 'CN=moon.teldat.org' with EAP successful [CFG] peer didn't use PPK for PPK_ID 'carol@teldat.org' [IKE] IKE_SA vpn-peer-PEER[3] established between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] scheduling rekeying in 25095s [IKE] maximum IKE_SA lifetime 25095s [CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ [IKE] CHILD_SA peer-PEER-tunnel-1{3} established with SPIs c517a3cc_i c2803517_o and TS 10.2.0.0/24 === 10.1.0.0/24 initiate completed successfully
Step 12: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 5b5f9f9c6d452c34_i cd0a19c258795fce_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 21734s peer-PEER-tunnel-1: #3, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3415s, expires in 3960s in c2803517, 0 bytes, 0 packets out c517a3cc, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 13: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.294 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.294/0.294/0.294/0.000 ms
Step 14: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.297 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.297/0.297/0.297/0.000 ms
Step 15: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 5b5f9f9c6d452c34_i cd0a19c258795fce_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 21734s peer-PEER-tunnel-1: #3, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3415s, expires in 3960s in c2803517, 168 bytes, 2 packets, 0s ago out c517a3cc, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Set the PPK as required in DUT0 and, with DUT1’s corresponding PPK deleted, check that the connection fails.
Step 16: Modify the following configuration lines in DUT0 :
set vpn ipsec auth-profile AUTH-SA remote ppk required
Step 17: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[3] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[3] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (120 bytes) [ENC] parsed IKE_AUTH request 5 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/ID] [IKE] received EAP identity 'carol' [IKE] phase2 method EAP_MD5 selected [IKE] sending tunneled EAP-TTLS AVP [EAP/REQ/MD5] [ENC] generating IKE_AUTH response 5 [ EAP/REQ/TTLS ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (132 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (132 bytes) [ENC] parsed IKE_AUTH request 6 [ EAP/RES/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/RES/MD5] [IKE] EAP_TTLS phase2 authentication of 'carol' with EAP_MD5 successful [IKE] EAP method EAP_TTLS succeeded, MSK established [ENC] generating IKE_AUTH response 6 [ EAP/SUCC ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (162 bytes) [ENC] parsed IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [CFG] PPK required but no PPK found for 'carol@teldat.org' [ENC] generating IKE_AUTH response 7 [ N(AUTH_FAILED) ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 18: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[5] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{5} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x34) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0xE7) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 19: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Note
Set the PPK as required in DUT1 and change the PPK in DUT0 back to not required. Check that the connection is still failing.
Step 20: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA remote ppk required
Step 21: Modify the following configuration lines in DUT1 :
set vpn ipsec auth-profile AUTH-SA local ppk required
Step 22: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] unable to resolve %any, initiate aborted initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 23: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[7] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{7} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0xD2) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0x93) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (122 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 24: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Test PPK EAP-TTLS STS
Description
Test the site-to-site VPN with PPK authentication and EAP-TTLS
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX1+IN9RJDTfN2U3KoSAf5tTxKNh/zf2ALag= set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX1/GgjtPXuCY7icK87RwhIyTQxhcSP17Qsg= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap %any type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX19i2fm1ZeuXkSm9slQs3bderrwjBseimOI= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.025 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.025/0.025/0.025/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.024 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.024/0.024/0.024/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX1+DmvJQ8gPN+6p1lg9tSIXKUjMWAqhKhbY= set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA local id dave set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, a6f91337882a5864_i 6bb3024416abf5a5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 21546s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3486s, expires in 3960s in c556224b, 0 bytes, 0 packets out c00a5ade, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ca4b6a4f86844277_i ba4e406ff62dccc1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 21783s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3391s, expires in 3956s in cd8bedc9, 0 bytes, 0 packets out c53a3dd1, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.383 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.383/0.383/0.383/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.270 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.270/0.270/0.270/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, a6f91337882a5864_i 6bb3024416abf5a5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 21540s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3480s, expires in 3954s in c556224b, 0 bytes, 0 packets out c00a5ade, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ca4b6a4f86844277_i ba4e406ff62dccc1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 21777s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3385s, expires in 3950s in cd8bedc9, 168 bytes, 2 packets, 0s ago out c53a3dd1, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, a6f91337882a5864_i 6bb3024416abf5a5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 21540s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3480s, expires in 3954s in c556224b, 0 bytes, 0 packets out c00a5ade, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ca4b6a4f86844277_i ba4e406ff62dccc1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 21777s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3385s, expires in 3950s in cd8bedc9, 168 bytes, 2 packets, 0s ago out c53a3dd1, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.317 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.317/0.317/0.317/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.292 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.292/0.292/0.292/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, a6f91337882a5864_i 6bb3024416abf5a5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 21540s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3480s, expires in 3954s in c556224b, 168 bytes, 2 packets, 0s ago out c00a5ade, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, ca4b6a4f86844277_i ba4e406ff62dccc1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 21777s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3385s, expires in 3950s in cd8bedc9, 168 bytes, 2 packets, 0s ago out c53a3dd1, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK STS
Description
Test the site-to-site VPN with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX18GAqx5U3tD/1tIZXndGzX1DW9BbemylSA= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX18m8tigTXpUN4OMMm+LoxYEus5ZdXkkTys= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.031 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.031/0.031/0.031/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.034 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.034/0.034/0.034/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX1/vS3dW9+bnD73F0aF0qtDdcVCxEADOOwA= set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.030 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.030/0.030/0.030/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 589c1eb129fcdd25_i 181399a2845aaa35_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 20666s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3332s, expires in 3960s in c6b176c1, 0 bytes, 0 packets out c9d753ac, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, b826d25f358aff94_i e8ca7419ee974632_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 14953s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3375s, expires in 3956s in c749cb1e, 0 bytes, 0 packets out cedc55c8, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.272 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.272/0.272/0.272/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.266 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.266/0.266/0.266/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 589c1eb129fcdd25_i 181399a2845aaa35_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 20660s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3326s, expires in 3954s in c6b176c1, 0 bytes, 0 packets out c9d753ac, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, b826d25f358aff94_i e8ca7419ee974632_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 14947s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3369s, expires in 3950s in c749cb1e, 168 bytes, 2 packets, 0s ago out cedc55c8, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 589c1eb129fcdd25_i 181399a2845aaa35_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 20660s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3326s, expires in 3954s in c6b176c1, 0 bytes, 0 packets out c9d753ac, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, b826d25f358aff94_i e8ca7419ee974632_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 14947s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3369s, expires in 3950s in c749cb1e, 168 bytes, 2 packets, 0s ago out cedc55c8, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.252 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.252/0.252/0.252/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.283 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.283/0.283/0.283/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 589c1eb129fcdd25_i 181399a2845aaa35_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 20660s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3326s, expires in 3954s in c6b176c1, 168 bytes, 2 packets, 0s ago out c9d753ac, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, b826d25f358aff94_i e8ca7419ee974632_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 14947s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3369s, expires in 3950s in c749cb1e, 168 bytes, 2 packets, 0s ago out cedc55c8, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK RSA STS
Description
Test the site-to-site VPN with PPK authentication and RSA
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=carol@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.034 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.034/0.034/0.034/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.034 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.034/0.034/0.034/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=dave@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 5bdf764c0897d2ca_i 65102965392b1d2d_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 17265s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3485s, expires in 3960s in cb939ed6, 0 bytes, 0 packets out c8927f30, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 1b63987e5c0813ab_i dd9085c3a0785822_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 23225s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3240s, expires in 3956s in c5de7a66, 0 bytes, 0 packets out cc856a1b, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.299 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.299/0.299/0.299/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.391 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.391/0.391/0.391/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 5bdf764c0897d2ca_i 65102965392b1d2d_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 17259s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3479s, expires in 3954s in cb939ed6, 0 bytes, 0 packets out c8927f30, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 1b63987e5c0813ab_i dd9085c3a0785822_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 23219s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3234s, expires in 3950s in c5de7a66, 168 bytes, 2 packets, 0s ago out cc856a1b, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 5bdf764c0897d2ca_i 65102965392b1d2d_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 17259s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3479s, expires in 3954s in cb939ed6, 0 bytes, 0 packets out c8927f30, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 1b63987e5c0813ab_i dd9085c3a0785822_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 23219s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3234s, expires in 3950s in c5de7a66, 168 bytes, 2 packets, 0s ago out cc856a1b, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.277 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.277/0.277/0.277/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.252 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.252/0.252/0.252/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 5bdf764c0897d2ca_i 65102965392b1d2d_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 17259s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3479s, expires in 3954s in cb939ed6, 168 bytes, 2 packets, 0s ago out c8927f30, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 1b63987e5c0813ab_i dd9085c3a0785822_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 23219s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3234s, expires in 3950s in c5de7a66, 168 bytes, 2 packets, 0s ago out cc856a1b, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK DMVPN
Description
Test the DMVPN scenario with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT1 :
set interfaces ethernet eth0 address 80.0.0.2/24 set interfaces tunnel tun0 address 10.0.0.2/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.2 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX1+gwU+N2yGaxmlrzLjEdo64dhZtIW3bRgE= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 2: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 80.0.0.1/24 set interfaces tunnel tun0 address 10.0.0.1/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.1 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 60 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp transport-nat-support set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX1+fYoa+O8MBSlaCOyzQVqoYd5D3XC6koL8= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.032 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.032/0.032/0.032/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.033 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.033/0.033/0.033/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, aa2e3288a0963364_i b536112844c33a71_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 53638s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 18097s, expires in 28799s in c8a8ca5c, 116 bytes, 1 packets, 1s ago out c38bfa98, 136 bytes, 1 packets, 1s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]
Step 6: Ping IP address 10.0.0.2 from DUT0:
admin@DUT0$ ping 10.0.0.2 local-address 10.0.0.1 count 1 size 56 timeout 1Show output
PING 10.0.0.2 (10.0.0.2) from 10.0.0.1 : 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.373 ms --- 10.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.373/0.373/0.373/0.000 ms
Step 7: Ping IP address 10.0.0.1 from DUT1:
admin@DUT1$ ping 10.0.0.1 local-address 10.0.0.2 count 1 size 56 timeout 1Show output
PING 10.0.0.1 (10.0.0.1) from 10.0.0.2 : 56(84) bytes of data. 64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.330 ms --- 10.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.330/0.330/0.330/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, aa2e3288a0963364_i b536112844c33a71_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 53638s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 18097s, expires in 28799s in c8a8ca5c, 332 bytes, 3 packets, 0s ago out c38bfa98, 352 bytes, 3 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]