Ppk
This set of tests shows how to configure and connect more than two subnets with each other through a VPN tunnel using PPK authentication in different ways.
Test PPK Options
Description
In this test, we will check the different options for PPK authentication (i.e., when it is required or not, when it remains unmatched, etc.).
Scenario
Note
Set default configuration for both DUTs, where PPK is not required and the PPK is the same.
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX18NRxhUcDkUdcWqrwkn5BA1hhwHUxEj1dU= set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX1/0FgMmHQmAIjpzIIHPXxl3O1NVHMQDFpU= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap %any type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX18mw0wb0yWHN09egDLBwtrj4cT+yET/QLc= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 73cdc8537d226913_i 4a44b9e1325991fc_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 27461s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3401s, expires in 3960s in c3b45e84, 0 bytes, 0 packets out caa662f9, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 6: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.319 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.319/0.319/0.319/0.000 ms
Step 7: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.399 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.399/0.399/0.399/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 73cdc8537d226913_i 4a44b9e1325991fc_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 27460s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3400s, expires in 3959s in c3b45e84, 168 bytes, 2 packets, 0s ago out caa662f9, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Delete the PPK from DUT0 and check that the SA falls back to standard authentication.
Step 9: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org
Step 10: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[1] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[1] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] not establishing CHILD_SA peer-PEER-tunnel-1{3} due to existing duplicate {2} with SPIs ce54eed0_i c0cb8eaf_o and TS 10.1.0.0/24 === 10.2.0.0/24 initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 11: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[2] between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[2] [ENC] generating INFORMATIONAL request 8 [ D ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (65 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 8 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] initiating IKE_SA vpn-peer-PEER[3] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{3} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x5E) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0x7E) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (181 bytes) [ENC] parsed IKE_AUTH response 7 [ AUTH SA TSi TSr ] [IKE] authentication of 'CN=moon.teldat.org' with EAP successful [CFG] peer didn't use PPK for PPK_ID 'carol@teldat.org' [IKE] IKE_SA vpn-peer-PEER[3] established between 80.0.0.2[carol]...80.0.0.1[CN=moon.teldat.org] [IKE] scheduling rekeying in 21544s [IKE] maximum IKE_SA lifetime 21544s [CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ [IKE] CHILD_SA peer-PEER-tunnel-1{3} established with SPIs c79f5b73_i c5a294f1_o and TS 10.2.0.0/24 === 10.1.0.0/24 initiate completed successfully
Step 12: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 60e428e92e70d135_i 852922fc299403de_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 19339s peer-PEER-tunnel-1: #4, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3402s, expires in 3960s in c5a294f1, 0 bytes, 0 packets out c79f5b73, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 13: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.294 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.294/0.294/0.294/0.000 ms
Step 14: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.313 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.313/0.313/0.313/0.000 ms
Step 15: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 60e428e92e70d135_i 852922fc299403de_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 19339s peer-PEER-tunnel-1: #4, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3402s, expires in 3960s in c5a294f1, 168 bytes, 2 packets, 0s ago out c79f5b73, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Set the PPK as required in DUT0 and, with DUT1’s corresponding PPK deleted, check that the connection fails.
Step 16: Modify the following configuration lines in DUT0 :
set vpn ipsec auth-profile AUTH-SA remote ppk required
Step 17: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
[IKE] deleting IKE_SA vpn-peer-PEER[3] between 80.0.0.1[CN=moon.teldat.org]...80.0.0.2[carol] [IKE] sending DELETE for IKE_SA vpn-peer-PEER[3] [ENC] generating INFORMATIONAL request 0 [ D ] [NET] sending packet: from 80.0.0.1[500](2) to 80.0.0.2[500](0) (65 bytes) [NET] received packet: from 80.0.0.2[500](0) to 80.0.0.1[500](2) (57 bytes) [ENC] parsed INFORMATIONAL response 0 [ ] [IKE] IKE_SA deleted terminate completed successfully [IKE] unable to resolve %any, initiate aborted initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 18: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[5] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{5} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0xA1) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0x90) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(NO_PPK) N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (162 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 19: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Note
Set the PPK as required in DUT1 and change the PPK in DUT0 back to not required. Check that the connection is still failing.
Step 20: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA remote ppk required
Step 21: Modify the following configuration lines in DUT1 :
set vpn ipsec auth-profile AUTH-SA local ppk required
Step 22: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] unable to resolve %any, initiate aborted initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 23: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found [IKE] initiating IKE_SA vpn-peer-PEER[7] to 80.0.0.1 [ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(USE_PPK) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (272 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (305 bytes) [ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(USE_PPK) N(CHDLESS_SUP) N(MULT_AUTH) ] [CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_256/ECP_256 [IKE] received cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] sending cert request for "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [IKE] establishing CHILD_SA peer-PEER-tunnel-1{7} [ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ IDr SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (247 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1252 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(1/2) ] [ENC] received fragment #1 of 2, waiting for complete IKE message [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (246 bytes) [ENC] parsed IKE_AUTH response 1 [ EF(2/2) ] [ENC] received fragment #2 of 2, reassembled fragmented IKE message (1433 bytes) [ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/TTLS ] [IKE] received end entity cert "CN=moon.teldat.org" [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [IKE] authentication of 'CN=moon.teldat.org' with RSA_EMSA_PKCS1_SHA2_256 successful [IKE] server requested EAP_TTLS authentication (id 0x7C) [TLS] EAP_TTLS version is v0 [ENC] generating IKE_AUTH request 2 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (279 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (1085 bytes) [ENC] parsed IKE_AUTH response 2 [ EAP/REQ/TTLS ] [ENC] generating IKE_AUTH request 3 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (67 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (540 bytes) [ENC] parsed IKE_AUTH response 3 [ EAP/REQ/TTLS ] [TLS] negotiated TLS 1.2 using suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 [TLS] received TLS server certificate 'CN=moon.teldat.org' [CFG] using certificate "CN=moon.teldat.org" [CFG] using trusted ca certificate "C=ES, ST=Madrid, L=Tres Cantos, O=Teldat S.A., OU=RD, CN=Teldat Root CA" [CFG] reached self-signed root ca with a path length of 0 [CFG] checking certificate status of "CN=moon.teldat.org" [CFG] certificate status is not available [ENC] generating IKE_AUTH request 4 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (229 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (122 bytes) [ENC] parsed IKE_AUTH response 4 [ EAP/REQ/TTLS ] [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/ID] [ENC] generating IKE_AUTH request 5 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (120 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (132 bytes) [ENC] parsed IKE_AUTH response 5 [ EAP/REQ/TTLS ] [IKE] received tunneled EAP-TTLS AVP [EAP/REQ/MD5] [IKE] server requested EAP_MD5 authentication (id 0xA3) [IKE] sending tunneled EAP-TTLS AVP [EAP/RES/MD5] [ENC] generating IKE_AUTH request 6 [ EAP/RES/TTLS ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (132 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 6 [ EAP/SUCC ] [IKE] EAP method EAP_TTLS succeeded, MSK established [IKE] authentication of 'carol' (myself) with EAP [ENC] generating IKE_AUTH request 7 [ AUTH N(PPK_ID) ] [NET] sending packet: from 80.0.0.2[500](0) to 80.0.0.1[500](0) (122 bytes) [NET] received packet: from 80.0.0.1[500](0) to 80.0.0.2[500](2) (65 bytes) [ENC] parsed IKE_AUTH response 7 [ N(AUTH_FAILED) ] [IKE] received AUTHENTICATION_FAILED notify error initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed
Step 24: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Test PPK EAP-TTLS STS
Description
Test the site-to-site VPN with PPK authentication and EAP-TTLS
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX1+Lx3Q0fJiwj+OspXWl5oDFXVUOG1ux6Ps= set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX19DNixvUJ1IqAkJuohMo57rKNPZBogyvZA= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap %any type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX19TUhCSVmzd+iUZwizmiWLLlbuy8GHeva4= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.025 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.025/0.025/0.025/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.038 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX18JB0jf68jPVSKbl9gH/tiIe03hFJJ0gHw= set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA local id dave set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.024 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.024/0.024/0.024/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 24f3d1cc78ef09d2_i 81b5d0d8c53c9e79_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 22495s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3429s, expires in 3960s in c6c1e3ea, 0 bytes, 0 packets out c171d375, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 44ab1e7673634914_i c9677d657699e0b3_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 24238s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3244s, expires in 3956s in c849558c, 0 bytes, 0 packets out c71afe72, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.314 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.314/0.314/0.314/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.299 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.299/0.299/0.299/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 24f3d1cc78ef09d2_i 81b5d0d8c53c9e79_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 22490s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3424s, expires in 3955s in c6c1e3ea, 0 bytes, 0 packets out c171d375, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 44ab1e7673634914_i c9677d657699e0b3_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 24233s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3239s, expires in 3951s in c849558c, 168 bytes, 2 packets, 0s ago out c71afe72, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 24f3d1cc78ef09d2_i 81b5d0d8c53c9e79_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 22489s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3423s, expires in 3954s in c6c1e3ea, 0 bytes, 0 packets out c171d375, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 44ab1e7673634914_i c9677d657699e0b3_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 24232s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3238s, expires in 3950s in c849558c, 168 bytes, 2 packets, 1s ago out c71afe72, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.308 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.308/0.308/0.308/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.343 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.343/0.343/0.343/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 24f3d1cc78ef09d2_i 81b5d0d8c53c9e79_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 22489s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3423s, expires in 3954s in c6c1e3ea, 168 bytes, 2 packets, 0s ago out c171d375, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 44ab1e7673634914_i c9677d657699e0b3_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 24232s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3238s, expires in 3950s in c849558c, 168 bytes, 2 packets, 1s ago out c71afe72, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK STS
Description
Test the site-to-site VPN with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX19r9+kb+aFPRvJGZZPvz8Z0rBOq0HCCQrY= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX1/Us3ePApVjtAICuELIR7QbG/CzshGib7A= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.038 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX18DbIgzuiXSMec7w23ZRCrTsqoXmWv41kk= set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.032 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.032/0.032/0.032/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 1d8d50f24fddf309_i ea262b29d75dd2c5_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 23858s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3346s, expires in 3960s in c1972d2f, 0 bytes, 0 packets out c4f20130, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 2946cd488c5d5240_i 2c7391860719fe20_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 20782s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 3413s, expires in 3957s in c15aa042, 0 bytes, 0 packets out c61eebb9, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.286 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.286/0.286/0.286/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.284 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.284/0.284/0.284/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 1d8d50f24fddf309_i ea262b29d75dd2c5_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 23853s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3341s, expires in 3955s in c1972d2f, 0 bytes, 0 packets out c4f20130, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 2946cd488c5d5240_i 2c7391860719fe20_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 20777s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3408s, expires in 3952s in c15aa042, 168 bytes, 2 packets, 0s ago out c61eebb9, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 1d8d50f24fddf309_i ea262b29d75dd2c5_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 23852s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3340s, expires in 3954s in c1972d2f, 0 bytes, 0 packets out c4f20130, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 2946cd488c5d5240_i 2c7391860719fe20_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 20776s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3407s, expires in 3951s in c15aa042, 168 bytes, 2 packets, 1s ago out c61eebb9, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.310 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.310/0.310/0.310/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.299 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.299/0.299/0.299/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 1d8d50f24fddf309_i ea262b29d75dd2c5_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.3' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 23852s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3340s, expires in 3954s in c1972d2f, 168 bytes, 2 packets, 0s ago out c4f20130, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 2946cd488c5d5240_i 2c7391860719fe20_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 20776s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3407s, expires in 3951s in c15aa042, 168 bytes, 2 packets, 1s ago out c61eebb9, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK RSA STS
Description
Test the site-to-site VPN with PPK authentication and RSA
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=carol@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.026 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.034 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.034/0.034/0.034/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=dave@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 80.0.0.3 from DUT2:
admin@DUT2$ ping 80.0.0.3 count 1 size 56 timeout 1Show output
PING 80.0.0.3 (80.0.0.3) 56(84) bytes of data. 64 bytes from 80.0.0.3: icmp_seq=1 ttl=64 time=0.038 ms --- 80.0.0.3 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, f25dd20d8b5a1393_i 410b1a88e44ba50e_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 21217s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3436s, expires in 3959s in c8b9169e, 0 bytes, 0 packets out c2fafe77, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 1ff4f76102ea4bf6_i d5528ae967c60fb5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 21781s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3364s, expires in 3956s in c22b16ca, 0 bytes, 0 packets out ca5d4363, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.314 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.314/0.314/0.314/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.273 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.273/0.273/0.273/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, f25dd20d8b5a1393_i 410b1a88e44ba50e_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 5s ago, rekeying in 21213s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 5s ago, rekeying in 3432s, expires in 3955s in c8b9169e, 0 bytes, 0 packets out c2fafe77, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 1ff4f76102ea4bf6_i d5528ae967c60fb5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 21777s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3360s, expires in 3952s in c22b16ca, 168 bytes, 2 packets, 0s ago out ca5d4363, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, f25dd20d8b5a1393_i 410b1a88e44ba50e_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 21212s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3431s, expires in 3954s in c8b9169e, 0 bytes, 0 packets out c2fafe77, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 1ff4f76102ea4bf6_i d5528ae967c60fb5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 21776s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3359s, expires in 3951s in c22b16ca, 168 bytes, 2 packets, 1s ago out ca5d4363, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.321 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.321/0.321/0.321/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.317 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.317/0.317/0.317/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, f25dd20d8b5a1393_i 410b1a88e44ba50e_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 21212s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3431s, expires in 3954s in c8b9169e, 168 bytes, 2 packets, 0s ago out c2fafe77, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 1ff4f76102ea4bf6_i d5528ae967c60fb5_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 21776s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3359s, expires in 3951s in c22b16ca, 168 bytes, 2 packets, 1s ago out ca5d4363, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK DMVPN
Description
Test the DMVPN scenario with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT1 :
set interfaces ethernet eth0 address 80.0.0.2/24 set interfaces tunnel tun0 address 10.0.0.2/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.2 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX182SCyXZTJBq3xZ2cGlO2jgpUre5zW1i/U= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 2: Set the following configuration in DUT0 :
set interfaces ethernet eth0 address 80.0.0.1/24 set interfaces tunnel tun0 address 10.0.0.1/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.1 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 60 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp transport-nat-support set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk %any encrypted-secret U2FsdGVkX18q/VXbbXUunkbkjJNUghl5/Esi0mrWQlc= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.031 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.031/0.031/0.031/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.028 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.028/0.028/0.028/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 5071bdbf1f79cf0f_i 584feafd2a182c82_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 66615s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 16625s, expires in 28800s in c011840b, 116 bytes, 1 packets, 0s ago out c1561c6d, 0 bytes, 0 packets local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]
Step 6: Ping IP address 10.0.0.2 from DUT0:
admin@DUT0$ ping 10.0.0.2 local-address 10.0.0.1 count 1 size 56 timeout 1Show output
PING 10.0.0.2 (10.0.0.2) from 10.0.0.1 : 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.337 ms --- 10.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.337/0.337/0.337/0.000 ms
Step 7: Ping IP address 10.0.0.1 from DUT1:
admin@DUT1$ ping 10.0.0.1 local-address 10.0.0.2 count 1 size 56 timeout 1Show output
PING 10.0.0.1 (10.0.0.1) from 10.0.0.2 : 56(84) bytes of data. 64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.370 ms --- 10.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.370/0.370/0.370/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 5071bdbf1f79cf0f_i 584feafd2a182c82_r* local '80.0.0.1' @ 80.0.0.1[500] remote '80.0.0.2' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 66612s IPSEC: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 16622s, expires in 28797s in c011840b, 564 bytes, 5 packets, 0s ago out c1561c6d, 352 bytes, 3 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre]