cellular
- controllers cellular <txt>
- H5-Rail
M10-Smart
RS420
Cellular device name
- Values:
wwanN – Cellular controller name
- Instances:
Multiple
- controllers cellular <txt> network
- M10-Smart
RS420
Configures network parameters for connection
- controllers cellular <txt> network mode <txt>
- M10-Smart
RS420
Select the type of technology used when connecting to the cellular network
- Values:
automatic – All modes are enabled
all-but-5g – All modes but 5G (SA/NSA)
all-but-5g-sa – All modes but 5G SA
5g-nsa – LTE or LTE + 5G-NSA
5g-sa – 5G SA only
cdma – CDMA (2G) only
gprs – GPRS (2G) only
hrpd – CDMA HRPD (3G) only
hybrid – CDMA Hybrid CDMA/HRPD
lte – LTE only
wcdma – UMTS/HSDPA (3G) only
- controllers cellular <txt> pdp <u32>
- M10-Smart
RS420
Configures PDP contexts (APNs) over the cellular radio interface
- Values:
u32 – PDP context index (1-4)
- Instances:
Multiple
- Required:
- controllers cellular <txt> pdp <u32> profile <id>
- M10-Smart
RS420
User profile to use for the network connection of this PDP context
- Reference:
- controllers cellular <txt> pin <txt>
- M10-Smart
RS420
Simcard Personal Identification Number (PIN)
- Values:
pin – PIN
- controllers cellular <txt> registration
- M10-Smart
RS420
Configures parameters used at the time of network registration
- controllers cellular <txt> registration profile <id>
- M10-Smart
RS420
Configures the profile used for network registration
- Reference:
- controllers cellular <txt> sim
- H5-Rail
Configures SIM parameters
- Required:
- Required:
- controllers cellular <txt> sim select <txt>
- H5-Rail
- Values:
txt – Selects the SIM socket to be used
- controllers cellular <txt> sim socket <txt>
- H5-Rail
- Values:
txt – Configures SIM socket parameters
- Instances:
Multiple
- controllers cellular <txt> sim socket <txt> network
- H5-Rail
Configures network parameters for connection
- controllers cellular <txt> sim socket <txt> network mode <txt>
- H5-Rail
Select the type of technology used when connecting to the cellular network
- Values:
automatic – All modes are enabled
all-but-5g – All modes but 5G (SA/NSA)
all-but-5g-sa – All modes but 5G SA
5g-nsa – LTE or LTE + 5G-NSA
5g-sa – 5G SA only
cdma – CDMA (2G) only
gprs – GPRS (2G) only
hrpd – CDMA HRPD (3G) only
hybrid – CDMA Hybrid CDMA/HRPD
lte – LTE only
wcdma – UMTS/HSDPA (3G) only
- controllers cellular <txt> sim socket <txt> pdp <u32>
- H5-Rail
Configures PDP contexts (APNs) over the cellular radio interface
- Values:
u32 – PDP context index (1-4)
- Instances:
Multiple
- Required:
- controllers cellular <txt> sim socket <txt> pdp <u32> profile <id>
- H5-Rail
User profile to use for the network connection of this PDP context
- Reference:
- controllers cellular <txt> sim socket <txt> pin <txt>
- H5-Rail
Simcard Personal Identification Number (PIN)
- Values:
pin – PIN
- controllers cellular <txt> sim socket <txt> registration
- H5-Rail
Configures parameters used at the time of network registration
- controllers cellular <txt> sim socket <txt> registration profile <id>
- H5-Rail
Configures the profile used for network registration
- Reference:
- controllers cellular <txt> sim socket <txt> supervision
- H5-Rail
Configures SIM supervision parameters
- Required:
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria
- H5-Rail
Configures SIM supervision criteria parameters
- controllers cellular <txt> sim socket <txt> supervision criteria advisor
- H5-Rail
Configures an advisor status as supervision criteria
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria advisor advisor-id <txt>
- H5-Rail
Advisor ID that causes the device to switch the SIM
- Reference:
- controllers cellular <txt> sim socket <txt> supervision criteria advisor connection-timeout <u32>
- H5-Rail
Maximum waiting time before checking the advisor status
- Values:
u32 – Timeout in seconds (0-1200)
- controllers cellular <txt> sim socket <txt> supervision criteria inactivity
- H5-Rail
Configures the connection status as supervision criteria
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria inactivity check-interval <u32>
- H5-Rail
Time interval between connection status checks
- Values:
u32 – Interval in seconds (30-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria inactivity over <u32>
- H5-Rail
Maximum time the device can remain disconnected
- Values:
u32 – Time in minutes (1-180)
- controllers cellular <txt> sim socket <txt> supervision criteria registration-lost
- H5-Rail
Configures the registration status as supervision criteria
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria registration-lost check-interval <u32>
- H5-Rail
Time interval between registration checks
- Values:
u32 – Interval in seconds (30-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria registration-lost over <u32>
- H5-Rail
Maximum time the device can remain unregistered
- Values:
u32 – Time in minutes (1-180)
- controllers cellular <txt> sim socket <txt> supervision criteria signal
- H5-Rail
Configures the coverage as supervision criteria
- controllers cellular <txt> sim socket <txt> supervision criteria signal check-interval <u32>
- H5-Rail
Time interval between coverage checks
- Values:
u32 – Interval in seconds (30-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria signal gprs
- H5-Rail
Configures the coverage as supervision criteria when the technology used is GSM/GPRS
- Required:
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria signal gprs over <u32>
- H5-Rail
Maximum time the device can have coverage levels equal to or lower than those configured
- Values:
u32 – Time in minutes (1-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria signal gprs rssi-level <int>
- H5-Rail
RSSI level that causes the device to switch the SIM
- Values:
int – RSSI level in dBm (-113-0)
- controllers cellular <txt> sim socket <txt> supervision criteria signal lte
- H5-Rail
Configures the coverage as supervision criteria when the technology used is LTE
- Required:
- Required:
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria signal lte over <u32>
- H5-Rail
Maximum time the device can have coverage levels equal to or lower than those configured
- Values:
u32 – Time in minutes (1-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria signal lte rsrp-level <int>
- H5-Rail
RSRP level that causes the device to switch the SIM
- Values:
int – RSRP level in dBm (-140-0)
- controllers cellular <txt> sim socket <txt> supervision criteria signal lte rsrq-level <int>
- H5-Rail
RSRQ level that causes the device to switch the SIM
- Values:
int – RSRQ level in dB (-20-0)
- controllers cellular <txt> sim socket <txt> supervision criteria signal nr5g
- H5-Rail
Configures the coverage as supervision criteria when the technology used is NR5G
- Required:
- Required:
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria signal nr5g over <u32>
- H5-Rail
Maximum time the device can have coverage levels equal to or lower than those configured
- Values:
u32 – Time in minutes (1-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria signal nr5g rsrp-level <int>
- H5-Rail
RSRP level that causes the device to switch the SIM
- Values:
int – RSRP level in dBm (-140-0)
- controllers cellular <txt> sim socket <txt> supervision criteria signal nr5g rsrq-level <int>
- H5-Rail
RSRQ level that causes the device to switch the SIM
- Values:
int – RSRQ level in dB (-20-0)
- controllers cellular <txt> sim socket <txt> supervision criteria signal wcdma
- H5-Rail
Configures the coverage as supervision criteria when the technology used is UMTS/HSDPA
- Required:
- Required:
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria signal wcdma ecno-level <int>
- H5-Rail
EcNo level that causes the device to switch the SIM
- Values:
int – EcNo level in dB (-50-5)
- controllers cellular <txt> sim socket <txt> supervision criteria signal wcdma over <u32>
- H5-Rail
Maximum time the device can have coverage levels equal to or lower than those configured
- Values:
u32 – Time in minutes (1-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria signal wcdma rscp-level <int>
- H5-Rail
RSCP level that causes the device to switch the SIM
- Values:
int – RSCP level in dBm (-113-0)
- controllers cellular <txt> sim socket <txt> supervision criteria technology
- H5-Rail
Configures the access technology as supervision criteria
- Required:
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria technology check-interval <u32>
- H5-Rail
Time interval between access technology checks
- Values:
u32 – Interval in seconds (30-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria technology over <u32>
- H5-Rail
Maximum time the device can use undesired access technology
- Values:
u32 – Time in minutes (1-65535)
- controllers cellular <txt> sim socket <txt> supervision criteria technology undesired <txt>
- H5-Rail
Access technology considered undesired
- Values:
gprs – GPRS (2G)
wcdma – UMTS/HSDPA (3G)
lte – LTE (4G)
- controllers cellular <txt> sim socket <txt> supervision criteria usage-time
- H5-Rail
Configures the usage time as supervision criteria
- Required:
- controllers cellular <txt> sim socket <txt> supervision criteria usage-time over <u32>
- H5-Rail
Maximum time the selected SIM can be used
- Values:
u32 – Time in minutes (1-65535)
- controllers cellular <txt> sim socket <txt> supervision sim-switch <txt>
- H5-Rail
- Values:
txt – SIM slot to switch to if any of the configured criteria are met