pppoe

interfaces pppoe <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Point-to-Point Protocol over Ethernet (PPPoE) interface name

Values:

  • pppoeN – PPPoE interface name

Instances:

Multiple

Required:

Required:

interfaces pppoe <txt> access-concentrator <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Restrict the PPPoE session on a given access concentrator

Values:

  • txt – Access concentrator name (1-32)

interfaces pppoe <txt> alarm
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Enable or disable alarm according the link state

interfaces pppoe <txt> alarm down <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Alarm to be enabled if the link is down

Reference:

system alarm <txt>

interfaces pppoe <txt> authentication
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Authentication

Required:

Required:

interfaces pppoe <txt> authentication protocol
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Authentication Protocol

interfaces pppoe <txt> authentication protocol chap
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Challenge Handshake Authentication Protocol

interfaces pppoe <txt> authentication protocol pap
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Password Authentication Protocol

interfaces pppoe <txt> authentication user <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

User information for CHAP authentication

Values:

  • txt – User name (1-32)

Instances:

Multiple

Required:

interfaces pppoe <txt> authentication user <txt> encrypted-password <password>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • password – Encrypted password for CHAP authentication

interfaces pppoe <txt> authentication user <txt> password <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Password for PAP authentication

interfaces pppoe <txt> base-interface
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Base interface for PPPoE

Instances:

Unique

interfaces pppoe <txt> base-interface bridge <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Bridge interface for PPPoE

Reference:

interfaces bridge <txt>

Instances:

Multiple

interfaces pppoe <txt> base-interface bridge <txt> vif <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Bridge Virtual Local Area Network (VLAN) ID for PPPoE

Reference:

interfaces bridge <txt> vif <u32>

Instances:

Unique

interfaces pppoe <txt> base-interface ethernet <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Ethernet interface for PPPoE

Reference:

interfaces ethernet <txt>

Instances:

Multiple

interfaces pppoe <txt> base-interface ethernet <txt> vif <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Ethernet Virtual Local Area Network (VLAN) ID for PPPoE

Reference:

interfaces ethernet <txt> vif <u32>

Instances:

Unique

interfaces pppoe <txt> description <id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Description

Values:

  • id – “Interface description is too long (limit 256 characters)” (1-256)

interfaces pppoe <txt> disable
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable interface

interfaces pppoe <txt> disable advisor <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Advisor to enable or disable the interface

Reference:

system advisor <txt>

interfaces pppoe <txt> disable-offload
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable offload engine in this interface

interfaces pppoe <txt> flow
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Active netflow on interface

interfaces pppoe <txt> flow egress
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Active output traffic

interfaces pppoe <txt> flow egress selector <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Traffic selector

Reference:

traffic selector <txt>

interfaces pppoe <txt> flow ingress
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Active input traffic

interfaces pppoe <txt> flow ingress selector <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Traffic selector

Reference:

traffic selector <txt>

interfaces pppoe <txt> ip
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IPv4 routing parameters

interfaces pppoe <txt> ip igmp
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Internet Group Management Protocol (IGMP) parameters

interfaces pppoe <txt> ip igmp join <ipv4>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Join multicast group

Values:

  • ipv4 – Join multicast group on this interface

interfaces pppoe <txt> ip igmp last-member-query-count <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IGMP last member query count

Values:

  • u32 – IGMP last member query count (1-255)

interfaces pppoe <txt> ip igmp last-member-query-interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IGMP last member query interval

Values:

  • u32 – IGMP last member query interval in deciseconds (1-65535)

interfaces pppoe <txt> ip igmp query-interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IGMP query interval

Values:

  • u32 – IGMP query interval in seconds (1-65535)

interfaces pppoe <txt> ip igmp query-max-response-time <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IGMP query response timeout value

Values:

  • u32 – IGMP query response timeout value in deciseconds (1-65535)

interfaces pppoe <txt> ip igmp version <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IGMP version

Values:

  • u32 – IGMP version used on this interface (2-3)

interfaces pppoe <txt> ip multicast
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Multicast parameters

interfaces pppoe <txt> ip multicast boundary-list <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Prefix-list to control for which groups to accept or ignore received PIM join or IGMP report messages

Reference:

protocols ip prefix-list <txt>

interfaces pppoe <txt> ip ospf
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Open Shortest Path First (OSPF) parameters

interfaces pppoe <txt> ip ospf authentication
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

OSPF interface authentication

interfaces pppoe <txt> ip ospf authentication encrypted-password <password>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • password – Encrypted password

interfaces pppoe <txt> ip ospf authentication message-digest <id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

MD5 authentication parameters

Values:

  • id – MD5 ID number (1-255)

Instances:

Multiple

interfaces pppoe <txt> ip ospf authentication message-digest <id> encrypted-password <password>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • password – MD5 encrypted key

interfaces pppoe <txt> ip ospf authentication message-digest <id> password <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

MD5 key

Values:

  • txt – MD5 Key (1-16)

interfaces pppoe <txt> ip ospf authentication password <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Plain text password

interfaces pppoe <txt> ip ospf bandwidth <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Bandwidth of interface (kilobits/sec)

Values:

  • u32 – Bandwidth in kilobits/sec (for calculating OSPF cost) (1-10000000)

interfaces pppoe <txt> ip ospf bfd
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

BFD protocol

interfaces pppoe <txt> ip ospf bfd profile <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

BFD profile for OSFP

Values:

  • txt – BFD profile name for OSFP

Reference:

protocols bfd profile <txt>

interfaces pppoe <txt> ip ospf cost <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interface cost

Values:

  • u32 – OSPF interface cost (1-65535)

interfaces pppoe <txt> ip ospf dead-interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interval after which neighbor is dead

Values:

  • u32 – OSPF dead interval in seconds (1-65535)

interfaces pppoe <txt> ip ospf hello-interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interval between hello packets

Values:

  • u32 – Interval between OSPF hello packets in seconds (1-65535)

interfaces pppoe <txt> ip ospf mtu-ignore
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable Maximum Transmission Unit (MTU) mismatch detection

interfaces pppoe <txt> ip ospf network <id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Network type

Values:

  • broadcast – Broadcast network type

  • non-broadcast – Non-broadcast network type

  • point-to-multipoint – Point-to-multipoint network type

  • point-to-point – Point-to-point network type

interfaces pppoe <txt> ip ospf priority <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Router priority

Values:

  • u32 – Priority (0-255)

interfaces pppoe <txt> ip ospf retransmit-interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interval between retransmitting lost link state advertisements

Values:

  • u32 – Retransmit interval in seconds (3-65535)

interfaces pppoe <txt> ip ospf transmit-delay <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Link state transmit delay

Values:

  • u32 – Transmit delay in seconds (1-65535)

interfaces pppoe <txt> ip pim
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Protocol Independent Multicast (PIM) parameters

interfaces pppoe <txt> ip pim disable-bsm
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable sending and receiving bootstrap messages

interfaces pppoe <txt> ip pim disable-unicast-bsm
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable sending and receiving unicast bootstrap messages

interfaces pppoe <txt> ip pim drpriority <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

PIM Designated Router (DR) priority

Values:

  • u32 – PIM DR priority for the interface (1-4294967295)

interfaces pppoe <txt> ip pim hello <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

PIM hello interval

Values:

  • u32 – PIM hello interval in seconds (1-255)

interfaces pppoe <txt> ip pim passive
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable sending and receiving all PIM control messages (such as: ASSERT, BSM, HELLO, JOIN, PRUNE, REGISTER, REGISTER-STOP)

interfaces pppoe <txt> ip reverse-path-filter <id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Policy for source validation by reversed path, as specified in RFC3704

Values:

  • strict – Enable Strict Reverse Path Forwarding as defined in RFC3704

  • loose – Enable Loose Reverse Path Forwarding as defined in RFC3704

  • disable – No source validation

interfaces pppoe <txt> ip rip
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Routing Information Protocol (RIP) parameters

interfaces pppoe <txt> ip rip authentication
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Authentication method

interfaces pppoe <txt> ip rip authentication encrypted-password <password>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • password – Encrypted password

interfaces pppoe <txt> ip rip authentication message-digest <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

MD5 authentication parameters

Values:

  • u32 – MD5 ID number (1-255)

Instances:

Multiple

interfaces pppoe <txt> ip rip authentication message-digest <u32> encrypted-password <password>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • password – MD5 encrypted key

interfaces pppoe <txt> ip rip authentication message-digest <u32> password <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

MD5 key

Values:

  • txt – MD5 Key (1-16)

interfaces pppoe <txt> ip rip authentication password <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Plain text password

Values:

  • txt – Plain text password (1-16)

interfaces pppoe <txt> ip rip split-horizon
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Split horizon parameters

interfaces pppoe <txt> ip rip split-horizon disable
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable split horizon on specified interface

interfaces pppoe <txt> ip rip split-horizon poison-reverse
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Enable poison reverse for split-horizon

interfaces pppoe <txt> ipv6
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IPv6 routing parameters

interfaces pppoe <txt> ipv6 address
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IPv6 address auto-configuration modes

interfaces pppoe <txt> ipv6 address autoconf
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Enable acquisition of IPv6 address using stateless address autoconfiguration (RFC 4862)

interfaces pppoe <txt> ipv6 address eui64 <ipv6net>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Assign IPv6 address using EUI-64 based on MAC address

Values:

  • ipv6net – 64-bit IPv6 prefix to use with EUI-64 to make address

Instances:

Multiple

interfaces pppoe <txt> ipv6 disable-forwarding
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Configure interface-specific Host/Router behaviour

If set, the interface will switch to host mode and IPv6 forwarding will be disabled on this interface.

interfaces pppoe <txt> ipv6 dup-addr-detect-transmits <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Number of NS messages to send while performing DAD

Values:

  • u32 – Number of NS messages to send while performing DAD (0-2147483647)

interfaces pppoe <txt> ipv6 ospfv3
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IPv6 Open Shortest Path First (OSPFv3) parameters

interfaces pppoe <txt> ipv6 ospfv3 area <u32|ipv4>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

OSPFv3 Area

Values:

  • u32 – OSPFv3 area in decimal notation (0-4294967295)

  • ipv4 – OSPFv3 area in dotted decimal notation

interfaces pppoe <txt> ipv6 ospfv3 authentication
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

OSPFv3 interface authentication

Instances:

Unique

interfaces pppoe <txt> ipv6 ospfv3 authentication hmac-sha-256 <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

HMAC-SHA-256 authentication parameters

Values:

  • u32 – HMAC-SHA-256 key ID (1-65535)

Instances:

Multiple

interfaces pppoe <txt> ipv6 ospfv3 authentication hmac-sha-256 <u32> encrypted-password <password>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • password – HMAC-SHA-256 encrypted password

interfaces pppoe <txt> ipv6 ospfv3 authentication hmac-sha-256 <u32> password <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

HMAC-SHA-256 plain text password

Values:

  • txt – HMAC-SHA-256 plain text password (1-16)

interfaces pppoe <txt> ipv6 ospfv3 authentication md5 <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

MD5 authentication parameters

Values:

  • u32 – MD5 key ID (1-65535)

Instances:

Multiple

interfaces pppoe <txt> ipv6 ospfv3 authentication md5 <u32> encrypted-password <password>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • password – MD5 encrypted password

interfaces pppoe <txt> ipv6 ospfv3 authentication md5 <u32> password <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

MD5 plain text password

Values:

  • txt – MD5 plain text password (1-16)

interfaces pppoe <txt> ipv6 ospfv3 bfd
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

BFD protocol

interfaces pppoe <txt> ipv6 ospfv3 bfd profile <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

BFD profile for OSFPv3

Values:

  • txt – BFD profile name for OSFPv3

Reference:

protocols bfd profile <txt>

interfaces pppoe <txt> ipv6 ospfv3 cost <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interface cost

Values:

  • u32 – OSPFv3 cost (1-65535)

interfaces pppoe <txt> ipv6 ospfv3 dead-interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interval after which neighbor is declared dead

Values:

  • u32 – Neighbor dead interval in seconds (1-65535)

interfaces pppoe <txt> ipv6 ospfv3 hello-interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interval between hello packets

Values:

  • u32 – Interval between OSPFv3 hello packets in seconds (1-65535)

interfaces pppoe <txt> ipv6 ospfv3 ifmtu <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interface MTU

Values:

  • u32 – Interface MTU value (1-65535)

interfaces pppoe <txt> ipv6 ospfv3 instance-id <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Instance identifier

Values:

  • u32 – Instance ID (0-255)

interfaces pppoe <txt> ipv6 ospfv3 mtu-ignore
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable Maximum Transmission Unit mismatch detection

interfaces pppoe <txt> ipv6 ospfv3 network <id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Network type

Values:

  • broadcast – Broadcast network type

  • point-to-point – Point-to-point network type

interfaces pppoe <txt> ipv6 ospfv3 passive
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable forming of adjacency

interfaces pppoe <txt> ipv6 ospfv3 priority <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Router priority

Values:

  • u32 – Priority (0-255)

interfaces pppoe <txt> ipv6 ospfv3 retransmit-interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interval between retransmitting lost link state advertisements

Values:

  • u32 – Retransmit interval in seconds (3-65535)

interfaces pppoe <txt> ipv6 ospfv3 transmit-delay <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Link state transmit delay

Values:

  • u32 – Link state transmit delay in seconds (1-65535)

interfaces pppoe <txt> ipv6 ripng
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Routing Information Protocol (RIPng)

interfaces pppoe <txt> ipv6 ripng split-horizon
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Split horizon parameters

interfaces pppoe <txt> ipv6 ripng split-horizon disable
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable split horizon

interfaces pppoe <txt> ipv6 ripng split-horizon poison-reverse
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Enable poison reverse for split-horizon

interfaces pppoe <txt> ipv6 router-advert
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Configure parameters for sending Router Advertisements (RAs)

interfaces pppoe <txt> ipv6 router-advert cur-hop-limit <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Value to be placed in the Current Hop Limit field in RAs

Values:

  • u32 – Value to place in the Current Hop Limit field in RAs (0-255)

interfaces pppoe <txt> ipv6 router-advert default-lifetime <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Value to be placed in Router Lifetime field in RAs

Values:

  • u32 – Value in seconds to be placed in Router Lifetime field in RAs (4-9000)

  • u32 – This means “not a default router”, in Router Lifetime field (0)

interfaces pppoe <txt> ipv6 router-advert default-preference <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Default router preference

Values:

  • low – Default router is low preference

  • medium – Default router is medium preference

  • high – Default router is high preference

interfaces pppoe <txt> ipv6 router-advert disable
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Disable sending RA messages

interfaces pppoe <txt> ipv6 router-advert interval <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Interval between unsolicited multicast RAs

Values:

  • u32 – Interval in seconds between unsolicited multicast RAs (1-1800)

AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Value of link MTU to place in RAs

Values:

  • u32 – Do not send MTU options in RAs (0)

  • u32 – Value of link MTU to place in RAs (1280-2147483647)

interfaces pppoe <txt> ipv6 router-advert managed-flag <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Value for “managed address configuration” flag in RAs

interfaces pppoe <txt> ipv6 router-advert name-server <ipv6>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • ipv6 – IPv6 address of a Recursive DNS Server

Instances:

Multiple

interfaces pppoe <txt> ipv6 router-advert other-config-flag <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Value to be placed in the “other configuration” flag in RAs

interfaces pppoe <txt> ipv6 router-advert prefix <ipv6net>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IPv6 prefix to be advertised in Router Advertisements (RAs)

Values:

  • ipv6net – IPv6 prefix to be advertized in Router Advertisements (RAs)

Instances:

Multiple

interfaces pppoe <txt> ipv6 router-advert prefix <ipv6net> autonomous-flag <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Whether prefix can be used for address auto-configuration

AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Flag that prefix can be used for on-link determination

interfaces pppoe <txt> ipv6 router-advert prefix <ipv6net> preferred-lifetime <u32|id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Time in seconds that the prefix will remain preferred

Values:

  • u32 – Time in seconds that the prefix will remain preferred (0-2147483647)

  • infinity – Prefix will remain preferred forever

interfaces pppoe <txt> ipv6 router-advert prefix <ipv6net> valid-lifetime <u32|id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Time in seconds that the prefix will remain valid

Values:

  • u32 – Time in seconds that the prefix will remain valid (0-2147483647)

  • infinity – Prefix will remain valid forever

interfaces pppoe <txt> ipv6 router-advert reachable-time <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Value to be placed in “Reachable Time” field in RAs

Values:

  • u32 – Reachable Time value in RAs (in milliseconds) (1-3600000)

  • u32 – Reachable Time 0 (i.e., unspecified by this router) (0)

interfaces pppoe <txt> ipv6 router-advert retrans-timer <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Value to place in “Retrans Timer” field in RAs.

Values:

  • u32 – Value in milliseconds to place in “Retrans Timer” field in RAs (0-2147483647)

interfaces pppoe <txt> local-address <ipv4>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Local IPv4 address

Values:

  • ipv4 – Local IPv4 address

interfaces pppoe <txt> local-identifier <ipv6>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Local IPv6 address

Values:

  • ipv6 – Local IPv6 address identifier (e.g. ::1)

interfaces pppoe <txt> logging
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Debug information

interfaces pppoe <txt> logging detailed
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Detailed debug information

interfaces pppoe <txt> mtu <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Maximum Transmission Unit (MTU)

Values:

  • u32 – Maximum Transmission Unit (MTU) (68-9000)

interfaces pppoe <txt> tcp-mss <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • u32 – Change tcp-mss value

interfaces pppoe <txt> traffic
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Traffic processing options

interfaces pppoe <txt> traffic control
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Traffic control for interface

interfaces pppoe <txt> traffic control in <id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Ingress traffic control for interface

Reference:

traffic control <id>

interfaces pppoe <txt> traffic control out <id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Egress traffic control for interface

Reference:

traffic control <id>

interfaces pppoe <txt> traffic nat
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Network Address Translation (NAT) parameters

interfaces pppoe <txt> traffic nat destination
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Destination NAT settings

interfaces pppoe <txt> traffic nat destination rule <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Rule number for NAT

Values:

  • u32 – Number for this NAT rule (1-9999)

Instances:

Multiple

interfaces pppoe <txt> traffic nat destination rule <u32> address <ipv4|ipv4net|ipv4range|id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IP address, subnet, range or redirect

Values:

  • ipv4 – NAT to the specified IP address

  • ipv4net – NAT to the specified network address

  • ipv4range – NAT to the specified IP range

  • redirect – NAT to the interface address

interfaces pppoe <txt> traffic nat destination rule <u32> description <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Rule description

interfaces pppoe <txt> traffic nat destination rule <u32> log
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Log packets to which this rule has been applied

interfaces pppoe <txt> traffic nat destination rule <u32> log level <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Loggin level

Values:

  • emerg – Emergency messages

  • alert – Urgent messages

  • crit – Critical messages

  • err – Error messages

  • warn – Warning messages

  • notice – Messages for further investigation

  • info – Informational messages

  • debug – Debug messages

interfaces pppoe <txt> traffic nat destination rule <u32> log prefix <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Log message prefix text, up to 29 characters

interfaces pppoe <txt> traffic nat destination rule <u32> network <ipv4net>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IP prefix to use in translation (host part is kept)

Values:

  • ipv4net – NAT to the specified network address, host part of the address will remain unchanged

interfaces pppoe <txt> traffic nat destination rule <u32> port <u32|id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

NAT port

Values:

  • u32 – Port to use in PAT (1-65535)

  • range – Port range (pool, for example, 1001-1005)

interfaces pppoe <txt> traffic nat destination rule <u32> protocol <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – NAT transport protocol

interfaces pppoe <txt> traffic nat destination rule <u32> selector <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Traffic selector

Reference:

traffic selector <txt>

interfaces pppoe <txt> traffic nat source
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Source NAT settings

interfaces pppoe <txt> traffic nat source rule <u32>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Rule number for NAT

Values:

  • u32 – Number for this NAT rule (1-9999)

Instances:

Multiple

interfaces pppoe <txt> traffic nat source rule <u32> address <ipv4|ipv4net|ipv4range|id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IP address, subnet, range or masquerade

Values:

  • ipv4 – NAT to the specified IP address

  • ipv4net – NAT to the specified network address

  • ipv4range – NAT to the specified IP range

  • masquerade – NAT to the interface address

interfaces pppoe <txt> traffic nat source rule <u32> description <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Rule description

interfaces pppoe <txt> traffic nat source rule <u32> log
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Log packets to which this rule has been applied

interfaces pppoe <txt> traffic nat source rule <u32> log level <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Loggin level

Values:

  • emerg – Emergency messages

  • alert – Urgent messages

  • crit – Critical messages

  • err – Error messages

  • warn – Warning messages

  • notice – Messages for further investigation

  • info – Informational messages

  • debug – Debug messages

interfaces pppoe <txt> traffic nat source rule <u32> log prefix <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – Log message prefix text, up to 29 characters

interfaces pppoe <txt> traffic nat source rule <u32> network <ipv4net>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

IP prefix to use in translation (host part is kept)

Values:

  • ipv4net – NAT to the specified network address, host part of the address will remain unchanged

interfaces pppoe <txt> traffic nat source rule <u32> port <u32|id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

NAT port

Values:

  • u32 – Port to use in PAT (1-65535)

  • range – Port range (pool, for example, 1001-1005)

interfaces pppoe <txt> traffic nat source rule <u32> protocol <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM
Values:

  • txt – NAT transport protocol

interfaces pppoe <txt> traffic nat source rule <u32> selector <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Traffic selector

Reference:

traffic selector <txt>

interfaces pppoe <txt> traffic policy
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Traffic policy rulesets for interface

interfaces pppoe <txt> traffic policy in <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Input traffic policy ruleset for interface

Reference:

traffic policy <txt>

Instances:

Multiple

interfaces pppoe <txt> traffic policy in <txt> priority <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Priority order for traffic policy

Values:

  • very-high – First policy executed before NAT

  • high – Second policy executed before NAT

  • low – First policy executed after NAT

  • very-low – Second policy executed after NAT

interfaces pppoe <txt> traffic policy local-in <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Local input traffic policy ruleset for interface

Reference:

traffic policy <txt>

Instances:

Multiple

interfaces pppoe <txt> traffic policy local-in <txt> priority <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Priority order for traffic policy

Values:

  • very-high – First policy executed

  • high – Second policy executed

  • low – Third policy executed

  • very-low – Fourth policy executed

interfaces pppoe <txt> traffic policy local-out <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Local output traffic policy ruleset for interface

Reference:

traffic policy <txt>

Instances:

Multiple

interfaces pppoe <txt> traffic policy local-out <txt> priority <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Priority order for traffic policy

Values:

  • very-high – First policy executed

  • high – Second policy executed

  • low – Third policy executed

  • very-low – Fourth policy executed

interfaces pppoe <txt> traffic policy out <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Output traffic policy ruleset for interface

Reference:

traffic policy <txt>

Instances:

Multiple

interfaces pppoe <txt> traffic policy out <txt> priority <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Priority order for traffic policy

Values:

  • very-high – First policy executed before NAT

  • high – Second policy executed before NAT

  • low – First policy executed after NAT

  • very-low – Second policy executed after NAT

interfaces pppoe <txt> traffic zone <txt>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Traffic zone associated with this interface

Reference:

traffic zone <txt>

interfaces pppoe <txt> vrf <id>
AresC640 Atlas840 H5-Rail M10-Smart M2 M20 RS420 RXL15000 SDE VM

Virtual Routing and Forwarding domain name

Reference:

system vrf <id>