Basic
This scenario shows how to configure an 802.1x supplicant.
Test 802.1x Basic Supplicant
Description
DUT1 is configured with an 802.1x authenticated interface. DUT0 is later configured to perform authentication.
Scenario
Step 1: Set the following configuration in DUT1 :
set interfaces ethernet eth0 address 10.215.168.65/24 set interfaces ethernet eth2 address 192.168.100.1/24 set interfaces ethernet eth2 authenticator 802.1x max-retransmissions 2 set interfaces ethernet eth2 authenticator aaa authentication list1 set interfaces ethernet eth2 authenticator log-level debug set interfaces ethernet eth2 authenticator mode only-802.1x set interfaces ethernet eth2 authenticator quiet-period 60 set interfaces ethernet eth2 authenticator reauth-period 0 set system aaa group radius radgroup1 server serv1 set system aaa list list1 method 1 group radius radgroup1 set system aaa server radius serv1 address 10.215.168.1 set system aaa server radius serv1 encrypted-key U2FsdGVkX1+WSPE4LJ+cz7/qiL1UBLallLSqwoe2kf/zTmFiD1Bm5SSDw5CyP6pqaorn6HWGzGJ5S8Njf4fOcw== set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Ping IP address 10.215.168.1 from DUT1:
admin@DUT1$ ping 10.215.168.1 count 1 size 56 timeout 1Show output
PING 10.215.168.1 (10.215.168.1) 56(84) bytes of data. 64 bytes from 10.215.168.1: icmp_seq=1 ttl=64 time=0.180 ms --- 10.215.168.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.180/0.180/0.180/0.000 ms
Step 3: Set the following configuration in DUT0 :
set interfaces ethernet eth2 address 192.168.100.2/24 set interfaces ethernet eth2 supplicant encrypted-password U2FsdGVkX19lJAJU6eYoJ6YeluIzlOpO35PAU6CSuLk= set interfaces ethernet eth2 supplicant username testing set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 4: Run command interfaces ethernet eth2 supplicant show status at DUT0 and check if output contains the following tokens:
AuthorizedShow output
--------------------------------------------------- Field Value --------------------------------------------------- EAP State SUCCESS EAP TLS Cipher ECDHE-RSA-AES256-GCM-SHA384 EAP TLS Version TLSv1.2 PAE State AUTHENTICATED Supplicant Port Status Authorized WPA State COMPLETED
Step 5: Run command interfaces ethernet eth2 supplicant show stats at DUT0 and check if output matches the following regular expressions:
Port Status\s+AuthorizedShow output
------------------------------- Field Value ------------------------------- EAPoL Frames (Rx) 11 EAPoL Frames (Tx) 11 Invalid Frames (Rx) 0 Logoff Frames (Tx) 0 Port Status Authorized Req Frames (Rx) 9 Req ID Frames (Rx) 1 Resp Frames (Tx) 10 Start Frames (Tx) 1
Step 6: Run command interfaces ethernet eth2 authenticator show stats at DUT1 and check if output matches the following regular expressions:
Authentication Successes\s+1 Authentication Mode\s+802\.1XShow output
--------------------------------------------- Field Value --------------------------------------------- Access Challenges 9 Authentication Backend RADIUS Authentication Failures 0 Authentication Mode 802.1X Authentication Status Authorized (802.1X) Authentication Successes 1 EAPoL frames (Rx) 11 EAPoL frames (Tx) 11 Quiet Period 60 Reauthenticate FALSE Reauthenticate Period 0 Session Time 0 Session User MAC de:ad:be:ef:6c:02 Session User Name testing
Step 7: Ping IP address 192.168.100.1 from DUT0:
admin@DUT0$ ping 192.168.100.1 count 1 size 56 timeout 1Show output
PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.401 ms --- 192.168.100.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.401/0.401/0.401/0.000 ms