Disable-Password-Authentication

SSH connection test with disable-password-authentication configuration. Tests that SSH server correctly blocks password authentication when configured and only allows key-based authentication.

SSH Connection With Password Authentication Enabled

Description

Verify that SSH connection with password works normally when password authentication is enabled (default behavior).

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.20/24
set service ssh
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address 10.215.168.21/24
set service ssh
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Ping IP address 10.215.168.20 from DUT1:

admin@DUT1$ ping 10.215.168.20 count 1 size 56 timeout 1
Show output
PING 10.215.168.20 (10.215.168.20) 56(84) bytes of data.
64 bytes from 10.215.168.20: icmp_seq=1 ttl=64 time=0.347 ms

--- 10.215.168.20 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.347/0.347/0.347/0.000 ms

Step 4: Init an SSH connection from DUT1 to IP address 10.215.168.20 with the user admin:

admin@DUT1$ ssh admin@10.215.168.20 option StrictHostKeyChecking=no option UserKnownHostsFile=/dev/null
Show output
Warning: Permanently added '10.215.168.20' (ECDSA) to the list of known hosts.
admin@10.215.168.20's password:
Welcome to Teldat OSDx v4.2.8.1

This system includes free software.
Contact Teldat for licenses information and source code.

Last login: Thu Dec 11 18:19:00 2025 from 11::3
admin@osdx$

SSH Connection With Password Authentication Disabled

Description

Verify that SSH connection with password fails when disable-password-authentication is configured.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.20/24
set service ssh disable-password-authentication
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address 10.215.168.21/24
set service ssh
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Ping IP address 10.215.168.20 from DUT1:

admin@DUT1$ ping 10.215.168.20 count 1 size 56 timeout 1
Show output
PING 10.215.168.20 (10.215.168.20) 56(84) bytes of data.
64 bytes from 10.215.168.20: icmp_seq=1 ttl=64 time=1.01 ms

--- 10.215.168.20 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.007/1.007/1.007/0.000 ms

Step 4: Init an SSH connection from DUT1 to IP address 10.215.168.20 with the user admin which is going to fail:

admin@DUT1$ ssh admin@10.215.168.20 option StrictHostKeyChecking=no option UserKnownHostsFile=/dev/null
Show output
Warning: Permanently added '10.215.168.20' (ECDSA) to the list of known hosts.
admin@10.215.168.20: Permission denied (publickey).
  CLI Error: Invalid token [option]
  CLI Error: Command error
admin@osdx$