Allowas-In

Scenario to verify BGP peer-group address-family ipv6-unicast allowas-in inheritance. When allowas-in is configured on a peer-group under address-family ipv6-unicast, neighbors that are members of that group accept IPv6 routes containing their own AS in the AS-path.

Test eBGP IPv6 - Peer-group allowas-in accepts routes with own AS

Description

Test that allowas-in configured on a peer-group under address-family ipv6-unicast is inherited by its members. DUT1 prepends DUT0’s own AS (100) to the route. With allowas-in inherited from the peer-group, DUT0 accepts the route despite containing its own AS in the path.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address '2001:db8:1::100/64'
set protocols bgp 100 neighbor peer address-family ipv6-unicast activate
set protocols bgp 100 neighbor peer peer-group MYGROUP
set protocols bgp 100 neighbor peer remote-address '2001:db8:1::200'
set protocols bgp 100 neighbor peer remote-as 200
set protocols bgp 100 parameters router-id 1.1.1.100
set protocols bgp 100 peer-group MYGROUP address-family ipv6-unicast allowas-in number 3
set protocols bgp 100 peer-group MYGROUP address-family ipv6-unicast route-map export ALLOW-ALL
set protocols bgp 100 peer-group MYGROUP address-family ipv6-unicast route-map import ALLOW-ALL
set protocols route-map ALLOW-ALL rule 10 action permit
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces dummy dum0 address '2001:db8:10::1/64'
set interfaces ethernet eth0 address '2001:db8:1::200/64'
set protocols bgp 200 address-family ipv6-unicast redistribute connected
set protocols bgp 200 neighbor peer address-family ipv6-unicast activate
set protocols bgp 200 neighbor peer address-family ipv6-unicast route-map export prepend-as
set protocols bgp 200 neighbor peer remote-address '2001:db8:1::100'
set protocols bgp 200 neighbor peer remote-as 100
set protocols bgp 200 parameters router-id 1.1.1.200
set protocols route-map prepend-as rule 10 action permit
set protocols route-map prepend-as rule 10 set as-path prepend 100
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Attention

Verify eBGP session establishes.

Step 3: Run command protocols bgp show ipv6 summary at DUT0 and check if output matches the following regular expressions:

2001:db8:1::200.*Established
Show output
IPv6 Unicast Summary:
BGP router identifier 1.1.1.100, local AS number 100 VRF default vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 24 KiB of memory
Peer groups 1, using 64 bytes of memory

Neighbor        LocalAddr       V         AS   MsgRcvd   MsgSent   TblVer  InQ OutQ  Up/Down        State   PfxRcd   PfxSnt Desc
2001:db8:1::200 0.0.0.0         4        200         4         4        0    0    0 00:00:00  Established        0        0 N/A

Total number of neighbors 1

Attention

Verify DUT0 accepts route 2001:db8:10::/64 with its own AS in the path.

Step 4: Run command protocols bgp show ipv6 2001:db8:10::/64 at DUT0 and check if output matches the following regular expressions:

200 100
Show output
BGP routing table entry for 2001:db8:10::/64, version 2
Paths: (1 available, best #1, table default)
  Advertised to peers:
  2001:db8:1::200
  200 100
    2001:db8:1::200 from 2001:db8:1::200 (1.1.1.200)
    (fe80::dcad:beff:feef:6c10) (used)
      Origin incomplete, metric 0, valid, external, best (First path received)
      Last update: Thu Mar  5 15:52:15 2026

Test eBGP IPv6 - Peer-group allowas-in disabled (default)

Description

Test that by default BGP rejects routes containing its own AS in the AS_PATH. DUT1 prepends DUT0’s AS (100) to the AS_PATH. Without allowas-in on the peer-group, DUT0 should reject this route.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address '2001:db8:1::100/64'
set protocols bgp 100 neighbor peer address-family ipv6-unicast activate
set protocols bgp 100 neighbor peer peer-group MYGROUP
set protocols bgp 100 neighbor peer remote-address '2001:db8:1::200'
set protocols bgp 100 neighbor peer remote-as 200
set protocols bgp 100 parameters router-id 1.1.1.100
set protocols bgp 100 peer-group MYGROUP address-family ipv6-unicast route-map export ALLOW-ALL
set protocols bgp 100 peer-group MYGROUP address-family ipv6-unicast route-map import ALLOW-ALL
set protocols route-map ALLOW-ALL rule 10 action permit
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces dummy dum0 address '2001:db8:10::1/64'
set interfaces ethernet eth0 address '2001:db8:1::200/64'
set protocols bgp 200 address-family ipv6-unicast redistribute connected
set protocols bgp 200 neighbor peer address-family ipv6-unicast activate
set protocols bgp 200 neighbor peer address-family ipv6-unicast route-map export prepend-as
set protocols bgp 200 neighbor peer remote-address '2001:db8:1::100'
set protocols bgp 200 neighbor peer remote-as 100
set protocols bgp 200 parameters router-id 1.1.1.200
set protocols route-map prepend-as rule 10 action permit
set protocols route-map prepend-as rule 10 set as-path prepend 100
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Attention

Verify eBGP session establishes.

Step 3: Run command protocols bgp show ipv6 summary at DUT0 and check if output matches the following regular expressions:

2001:db8:1::200.*Established
Show output
IPv6 Unicast Summary:
BGP router identifier 1.1.1.100, local AS number 100 VRF default vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 24 KiB of memory
Peer groups 1, using 64 bytes of memory

Neighbor        LocalAddr       V         AS   MsgRcvd   MsgSent   TblVer  InQ OutQ  Up/Down        State   PfxRcd   PfxSnt Desc
2001:db8:1::200 0.0.0.0         4        200         2         4        0    0    0 00:00:00  Established        0        0 N/A

Total number of neighbors 1

Note

DUT0 should NOT receive route 2001:db8:10::/64 because it contains its own AS (100).

Step 4: Run command protocols bgp show ipv6 at DUT0 and check if output does not match the following regular expressions:

2001:db8:10::/64
Show output
No BGP prefixes displayed, 0 exist