Update-Source
Scenario to verify BGP peer-group update-source inheritance.
When update-source is configured on a peer-group, all members use the
specified interface as the source address for BGP sessions.
Test iBGP - Session establishes without update-source using direct interface
Description
Test that without update-source on the peer-group, BGP uses the outgoing
interface IP as the source address. Both peers use their physical interface IPs,
so the session establishes normally.
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 2.2.2.100/32 set interfaces ethernet eth0 address 10.10.0.100/24 set protocols bgp 20 neighbor peer peer-group MYGROUP set protocols bgp 20 neighbor peer remote-address 10.10.0.200 set protocols bgp 20 neighbor peer remote-as 20 set protocols bgp 20 peer-group MYGROUP remote-as 20 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 1.1.1.1/24 set interfaces ethernet eth0 address 10.10.0.200/24 set protocols bgp 20 neighbor peer remote-address 10.10.0.100 set protocols bgp 20 neighbor peer remote-as 20 set protocols bgp 20 redistribute connected set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Attention
Verify BGP session is established using directly connected interface addresses.
Step 3: Run command protocols bgp show ip summary at DUT0 and check if output matches the following regular expressions:
10.10.0.200.*EstablishedShow output
IPv4 Unicast Summary: BGP router identifier 10.10.0.100, local AS number 20 VRF default vrf-id 0 BGP table version 2 RIB entries 3, using 384 bytes of memory Peers 1, using 24 KiB of memory Peer groups 1, using 64 bytes of memory Neighbor LocalAddr V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State PfxRcd PfxSnt Desc 10.10.0.200 10.10.0.100 4 20 5 4 2 0 0 00:00:01 Established 2 0 FRRouting/10.4.1 Total number of neighbors 1
Attention
Verify DUT0 local address is from the physical interface (not loopback).
Step 4: Run command protocols bgp show ip neighbors at DUT0 and check if output matches the following regular expressions:
Local host: 10.10.0.100Show output
BGP neighbor is 10.10.0.200, remote AS 20, local AS 20, internal link Local Role: undefined Remote Role: undefined Hostname: osdx Member of peer-group MYGROUP for session parameters BGP version 4, remote router ID 10.10.0.200, local router ID 10.10.0.100 BGP state = Established, up for 00:00:02 Last read 00:00:01, Last write 00:00:01 Hold time is 90 seconds, keepalive interval is 30 seconds Configured hold time is 90 seconds, keepalive interval is 30 seconds Configured tcp-mss is 0, synced tcp-mss is 1448 Configured conditional advertisements interval is 60 seconds Neighbor capabilities: 4 Byte AS: advertised and received AddPath: IPv4 Unicast: RX advertised and received Paths-Limit: IPv4 Unicast: advertised (0) and received (0) Long-lived Graceful Restart: advertised and received Address families by peer: Route refresh: advertised and received Enhanced Route Refresh: advertised and received Address Family IPv4 Unicast: advertised and received Hostname Capability: advertised (name: osdx,domain name: n/a) received (name: osdx,domain name: n/a) Version Capability: advertised software version (FRRouting/10.4.1) received software version (FRRouting/10.4.1) Link-Local Next Hop Capability: not advertised not received Graceful Restart Capability: advertised and received Remote Restart timer is 120 seconds Address families by peer: none Graceful restart information: End-of-RIB send: IPv4 Unicast End-of-RIB received: IPv4 Unicast Local GR Mode: Helper* Remote GR Mode: Helper R bit: True N bit: True Timers: Configured Restart Time(sec): 120 Received Restart Time(sec): 120 Configured LLGR Stale Path Time(sec): 0 IPv4 Unicast: F bit: False End-of-RIB sent: Yes End-of-RIB sent after update: Yes End-of-RIB received: Yes Timers: Configured Stale Path Time(sec): 360 LLGR Stale Path Time(sec): 0 Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 2 1 Notifications: 0 0 Updates: 1 3 Keepalives: 1 1 Route Refresh: 0 0 Capability: 0 0 Total: 4 5 Prefix statistics: Inbound filtered: 0 AS-PATH loop: 0 Originator loop: 0 Cluster loop: 0 Invalid next-hop: 0 Withdrawn: 0 Attributes discarded: 0 Minimum time between advertisement runs is 0 seconds For address family: IPv4 Unicast MYGROUP peer-group member Update group 1, subgroup 1 Packet Queue length 0 Community attribute sent to this neighbor(all) 2 accepted, 0 sent prefixes Connections established 1; dropped 0 Last reset 00:00:04, Waiting for peer OPEN (FRRouting/10.4.1) Internal BGP neighbor may be up to 255 hops away. Local host: 10.10.0.100, Local port: 179 Foreign host: 10.10.0.200, Foreign port: 43150 Nexthop: 10.10.0.100 Nexthop global: fe80::dcad:beff:feef:6c00 Nexthop local: fe80::dcad:beff:feef:6c00 BGP connection: shared network BGP Connect Retry Timer in Seconds: 30 Estimated round trip time: 0 ms Read thread: on Write thread: on FD used: 25
Attention
Verify DUT0 receives route 1.1.1.0/24 from DUT1.
Step 5: Run command protocols bgp show ip at DUT0 and check if output matches the following regular expressions:
1.1.1.0/24.*10.10.0.200Show output
BGP table version is 2, local router ID is 10.10.0.100, vrf id 0 Default local pref 100, local AS 20 local address - Status codes: s suppressed, d damped, h history, u unsorted, * valid, > best, = multipath, i internal, r RIB-failure, S Stale, R Removed Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path *ui 1.1.1.0/24 10.10.0.200 0 100 0 ? *ui 10.10.0.0/24 10.10.0.200 0 100 0 ? Displayed 2 routes and 2 total paths
Test iBGP - Peer-group update-source uses loopback as source
Description
Test that update-source configured on a peer-group is inherited by its
members. DUT0 uses the dummy interface (2.2.2.100) as the source
address for BGP sessions instead of the physical interface.
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 2.2.2.100/32 set interfaces ethernet eth0 address 10.10.0.100/24 set protocols bgp 20 neighbor peer peer-group MYGROUP set protocols bgp 20 neighbor peer remote-address 10.10.0.200 set protocols bgp 20 neighbor peer remote-as 20 set protocols bgp 20 peer-group MYGROUP remote-as 20 set protocols bgp 20 peer-group MYGROUP update-source dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 1.1.1.1/24 set interfaces ethernet eth0 address 10.10.0.200/24 set protocols bgp 20 neighbor peer remote-address 2.2.2.100 set protocols bgp 20 neighbor peer remote-as 20 set protocols bgp 20 redistribute connected set protocols static route 2.2.2.0/24 next-hop 10.10.0.100 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
Attention
Verify iBGP session establishes using the loopback address.
Step 3: Run command protocols bgp show ip summary at DUT0 and check if output matches the following regular expressions:
10.10.0.200.*EstablishedShow output
IPv4 Unicast Summary: BGP router identifier 10.10.0.100, local AS number 20 VRF default vrf-id 0 BGP table version 2 RIB entries 3, using 384 bytes of memory Peers 1, using 24 KiB of memory Peer groups 1, using 64 bytes of memory Neighbor LocalAddr V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State PfxRcd PfxSnt Desc 10.10.0.200 2.2.2.100 4 20 5 4 2 0 0 00:00:01 Established 2 0 FRRouting/10.4.1 Total number of neighbors 1
Attention
Verify DUT0 local address is from the dummy/loopback interface.
Step 4: Run command protocols bgp show ip neighbors at DUT0 and check if output matches the following regular expressions:
Local host: 2.2.2.100Show output
BGP neighbor is 10.10.0.200, remote AS 20, local AS 20, internal link Local Role: undefined Remote Role: undefined Hostname: osdx Member of peer-group MYGROUP for session parameters BGP version 4, remote router ID 10.10.0.200, local router ID 10.10.0.100 BGP state = Established, up for 00:00:01 Last read 00:00:00, Last write 00:00:00 Hold time is 90 seconds, keepalive interval is 30 seconds Configured hold time is 90 seconds, keepalive interval is 30 seconds Configured tcp-mss is 0, synced tcp-mss is 1448 Configured conditional advertisements interval is 60 seconds Neighbor capabilities: 4 Byte AS: advertised and received AddPath: IPv4 Unicast: RX advertised and received Paths-Limit: IPv4 Unicast: advertised (0) and received (0) Long-lived Graceful Restart: advertised and received Address families by peer: Route refresh: advertised and received Enhanced Route Refresh: advertised and received Address Family IPv4 Unicast: advertised and received Hostname Capability: advertised (name: osdx,domain name: n/a) received (name: osdx,domain name: n/a) Version Capability: advertised software version (FRRouting/10.4.1) received software version (FRRouting/10.4.1) Link-Local Next Hop Capability: not advertised not received Graceful Restart Capability: advertised and received Remote Restart timer is 120 seconds Address families by peer: none Graceful restart information: End-of-RIB send: IPv4 Unicast End-of-RIB received: IPv4 Unicast Local GR Mode: Helper* Remote GR Mode: Helper R bit: True N bit: True Timers: Configured Restart Time(sec): 120 Received Restart Time(sec): 120 Configured LLGR Stale Path Time(sec): 0 IPv4 Unicast: F bit: False End-of-RIB sent: Yes End-of-RIB sent after update: Yes End-of-RIB received: Yes Timers: Configured Stale Path Time(sec): 360 LLGR Stale Path Time(sec): 0 Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 2 1 Notifications: 0 0 Updates: 1 3 Keepalives: 1 1 Route Refresh: 0 0 Capability: 0 0 Total: 4 5 Prefix statistics: Inbound filtered: 0 AS-PATH loop: 0 Originator loop: 0 Cluster loop: 0 Invalid next-hop: 0 Withdrawn: 0 Attributes discarded: 0 Minimum time between advertisement runs is 0 seconds Update source is dum0 For address family: IPv4 Unicast MYGROUP peer-group member Update group 1, subgroup 1 Packet Queue length 0 Community attribute sent to this neighbor(all) 2 accepted, 0 sent prefixes Connections established 1; dropped 0 Last reset 00:00:04, Waiting for peer OPEN (FRRouting/10.4.1) Internal BGP neighbor may be up to 255 hops away. Local host: 2.2.2.100, Local port: 179 Foreign host: 10.10.0.200, Foreign port: 39522 Nexthop: 2.2.2.100 Nexthop global: fe80::d826:35ff:fe5b:c883 Nexthop local: fe80::d826:35ff:fe5b:c883 BGP connection: shared network BGP Connect Retry Timer in Seconds: 30 Estimated round trip time: 0 ms Read thread: on Write thread: on FD used: 25
Attention
Verify DUT0 receives route 1.1.1.0/24 from DUT1.
Step 5: Run command protocols bgp show ip at DUT0 and check if output matches the following regular expressions:
1.1.1.0/24Show output
BGP table version is 2, local router ID is 10.10.0.100, vrf id 0 Default local pref 100, local AS 20 local address - Status codes: s suppressed, d damped, h history, u unsorted, * valid, > best, = multipath, i internal, r RIB-failure, S Stale, R Removed Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path *ui 1.1.1.0/24 10.10.0.200 0 100 0 ? *ui 10.10.0.0/24 10.10.0.200 0 100 0 ? Displayed 2 routes and 2 total paths